September 2025

Understanding the ‘hows’ and ‘whys’ around ADAS and the importance of how much your clients depend on you to keep these systems functioning as they should.

Reviewed by Mike Robinson, technical trainer at Mobile Auto Solutions in Lansing, Michigan.

Vehicle technology is changing all the time, and it’s no easy feat to keep yourself and your tools up to date.

Advancing technology for tire tools and equipment makes techs more efficient while performing these jobs.

The 10,000-lb-capacity Short-Rise Two-Post Lift, No. 10AP-SRT, from BendPak offers a solution for shops that want the productivity of a two-post lift without the unnecessary height...

This inaugural event is open to all industry professionals, with a portion of proceeds going to the University of the Aftermarket.

The 10-Ton Collision Repair Set, No. 1515B, from OTC is equipped with a single-speed hydraulic hand pump that features an automatic overload system to prevent equipment damage...

The Maverick Pro from Hunter Engineering features an ergonomic pick-and-place wheel lift capable of lifting and tilting heavy assemblies and 19.5s up to 175 lbs in one smooth ...

The ESCO HD Stud & Hub Cleaner, No. 50172, is a dual function tool engineered to clean both wheel studs and hub mating surfaces. This heavy duty tool improves service efficiency...

The Ranger by BendPak RB30T Truck Wheel Balancer is designed for commercial truck fleets and high-volume tire shops. It features a max capacity of 330 lbs, tire diameters up to...

The M18 TOP-OFF Charger and Power Supply, No. 2847-20, from Milwaukee Tool is the most compact M18 charger, up to 65 percent smaller than traditional kitted chargers. Designed...

The Associated Equipment Wheeled Battery Charger and Analyzer, No. 6021AGM, is an all-in-one charger, tester, and analyzer designed for automotive and fleet service. It delivers...

The Air Hammer-Powered Tommy 475 Wheel Hub Puller, No. PMXTOM475PRO, from ProMAXX Tool by Milton is designed to save technicians time with no more control arm teardown. It pairs...

The Ascot Supply 1/2" Drive Super Duty Air Impact Wrench, No. 153-23120, features a 2" extended anvil, a twin hammer mechanism, and a full teasing trigger for better user control...

The Mayhew Tools 4-pc Demo Tool Set, No. 14050, includes a 3/16" pin punch, a 1/4" pin punch, a 1/4" center punch, and a 7/16" pry chisel. Each tool features a tempered alloy ...

The ESAB Victor Medalist 350 Classic Utility Kit features Victor heavy duty G350 oxygen and fuel gas regulators, a heavy duty Victor combination torch, a 1-101 series size 2 cutting...

The HawkEye Elite Xpandable from Hunter Engineering features Quick Grip adapters, WinAlign software and its specs database, the ADASLink diagnostic scan tool with secure gateway...

The 2-pc Patented Locking Pliers, No. FRLP100, from VIM Tools are made of CRMO (chromemoly steel) and feature bi-directional jaws. A traditional locking jaw with vertical...

The Wrench Extender Head Attachment, No. WE42A from VIM Tools is designed to be used with the HDR34 handle. This attachment allows users to put a wrench up to a 55mm into...

The Pry Bar Attachment Head, No. PB25A, from VIM Tools can be used with the TRK100 system from VIM. This head works with the TH21 handle allowing users to have a variable length...

The Maxxeon WorkStar CYCLOPS Rechargeable Work Light offers up to 720 lm of brilliant white light for two hours on high, 360 lm for 4.5 hours on medium, and 180 lm for 10 hours...

The 8-pc Flip Socket Set, No. 13430, from Lisle Corporation includes double-ended flip sockets with two hex sizes in each socket. This kit is designed for the removal of standard...

The Milwaukee Tool M12 ROVER Multi-Directional Flood Light w/ PACKOUT, No. 2350-20, is designed to deliver high-output, adjustable lighting for commercial MEP professionals. This...

The Cool Boss CB-19SL Portable Evaporative Air Cooler blows chilled air at a volume of 6,840 cubic feet per minute. The CB-19SL stands at just over 44" tall and weighs 40 lbs ...

The TC002C Duo from TOPDON is universal USB-C compatible and designed to work with all USB-C smartphones and tablets. It features advanced thermal clarity, 256 x 192 IR resolution...

The SUNEX Tools Heavy Duty Long Barrel Air Hammer, No. SX2302, is engineered for maximum impact, user comfort, and jobsite productivity. It delivers 2,300 BPM and a 3.75" stroke...

The "FOUL PLUG" Premium Full Drawer Service Carts, No. 8057XTRFOULPLUG, from SUNEX Tools features an original design by artist Tony Squindo, a carbon-caked, oil-soaked spark...

The Quiet-Enclosed Reciprocating Air Compressor from Ingersoll Rand features a two-stage cast iron pump and cast iron frame that are built to last. The stainless steel finger ...

The Redline Detection Smoke Pro Total Tech, No. 95-0050, is designed to quickly pinpoint intake, EVAP, exhaust, and general repair leaks. This tool uses pressure, vacuum, and ...

The Ernst Manufacturing Magnetic Screwdriver Pro is designed to hold up to 26 screwdrivers, keeping tools neat and secure for easy access. Featuring a modular design, this organizer...

The ProTac 2.0 HP from Streamlight is a tactical flashlight that delivers 85,000 candela for downrange illumination. The light offers nearly five times the distance output of ...

The Autel MaxiTPMS TS900K8 Kit includes the MaxiTPMS TS900 tablet and eight 1-Sensors. The Android-based tablet offers TPMS, diagnostics, and service functions, including sensor...

The Innovative Products of America BrushAll Cut-Off Wheels, Nos. 8131, 8130, and 8152, feature a unique core bonding technology that outlasts and outperforms traditional abrasives...

The KNIPEX 9" StepCut XL Cable Shears, No. 95 12 225, feature dual cutting edges for easier cutting. The tool cuts solid copper or aluminum cables up to 2 AWG, stranded cables...

The Twin Cam Inner Cam Bearing Remover/Installer Kit from OTC Tools contains the tools needed to remove and isntall inner cam bearings without damage to the crankcase. The bearing...

The Blair Equipment Pneumatic Belt Sander features a lightweight, ergonomic design that reduces operator fatigue and increases the tool's maneuverability. It uses a high-torque...

The H&S Autoshot Pull-Pro Dent Pulling Tower, No. UNI-1096, offers 1,300 lbs of pulling power at 65" thanks to its vulcanized rubber suspension mount plate design. The Pull...

The Flexzilla Colors Garden Hose from Legacy Manufacturing features a durable, abrasion-resistant outer cover with reinforced mid-layering for added strength. The Flexzilla O-...

The Channellock SpeedGrip 10" Tongue and Groove Pliers, No. 432X, feature self-gripping V-jaws with laser-hardened teeth for added grip and durability. They include molded non...

The Coast York Multi-Tool, No. MT500, is made of a durable stainless steel frame with ergonomic aluminum overlays. It offers 16 tools, 12 of which lock, and is backed by Coast...

The AFF 3.5-Ton High-Lift Floor Jack, No. 352HL, is a heavy duty high-lift floor jack made with durable all steel construction and offering extended height range for quick and...

The Dent Fix Equipment RIV-E Multi-Function Riveter, No. DF-SPR60B, is an easy to operate panel replacement tool. Users can hold the trigger and the unit automatically releases...

The Atlas Air Force AF13 Gas 13HP 30-Gallon Air Compressor is powered by a Honda GX390 13HP, electric-start gas engine. It features a pneumatic throttle control, electric-start...

The Gaither Tool 14L Bead Bazooka, No. BB14L3, features a 3" barrel and the patented rapid air release valve. With its larger tank, the BB14L3 can handle all automotive, truck...

The Car-O-Liner EVO 1-2-3 Anchoring and Holding Systems can be used alone or in combination with one another to securely handle every anchoring and fixturing situation. The EVO...

The Coxreels PC10 Series Model Reel, Nos. PC10-3016-H, PC10-3016-M, and PC10-3016-K, is an LED light featuring a variety of industrial-grade features and options including a 50...

The AirStrike 3000 BPM Bi-Directional Air Hammer, No. LT955AH, from LTI Tools by Milton, delivers 3,000 BPM and 2-1/2" stroke with an adjustable brass regulator. It hammers...

The 4-pc Metric Lug Socket Set with Carbon Fiber Sleeves, No. 4250, from CTA Tools includes removable, extra-thin carbon fiber protective sleeves to safeguard wheel finishes from...

The Cal-Van Tools 6-pc Heavy Duty Swivel Type Oil Filter Wrench Set, No. 99100, features a swivel handle that allows users to access filters in hard-to-reach areas. Its wide dimpled...

The Sharktooth Sway Bar Plier, No. MLSTSBP7, from Matco Tools are engineered to deliver a secure grip with their 3-point jaw design that effectively holds stripped and rounded...

The Snap-on 3/8" Drive 36mm Low Profile Filter Socket, No. S3625, assists technicians in removing and installing fuel filters on Ford 6.0L and 6.4L diesel trucks. The fuel filter...

The Hofmann monty 3550 Tilt-Tower Tire Changer includes an on-floor bead breaker integrated with the tilt-tower configuration, facilitating effortless wheel placement, reducing...

The Extended Auto-Grip Air Chuck with Handle, No. PN25004, from Ken-Tool features both extended reach and ergonomic control, making this tool ideal for hard-to-reach valves. This...

The Kent Automotive 2K Epoxy Primer Filler, No. 1677479, is a two-component epoxy that requires no mixing or activation. It simply needs to be shaken and sprayed, and it can be...

The PPG Super Value SC300 Series Clearcoats are acrylic urethane clearcoats that provide consistent results with a quick dry time. They can be cured using air or baking. The SC300...

The Mini-Ductor Specialty Coil Kit, No. IDIMD99-690, from Induction Innovations is designed for applications that demand more heat coverage and flexibility. Compatible with all...

The DeWalt 7"-9" Variable-Speed Polisher with Soft Start, No. DWTDWP849X, features a 12A motor and all ball-bearing construction with heat-treated steel gears that stand up to...

The Intelli-Start 700A 12V Pro Jump Starter, No. IS1500, from Projecta, is a super compact lithium jump starter capable of starting 12V vehicles with engines up to 8.0L gas...

The 20V MAX XR 3/4" High Torque Impact Wrench with Hog Ring Anvil Kit, No. DWTDCF964GH1, from DeWalt, is designed to deliver 1,420 ft-lbs of max fastening torque and 1,900 ft-...

The SUPERNOVA Spray Gun, No. LS400, from Anest Iwata, is designed to deliver a consistent droplet size when atomizing. This, combined with the flat, even SUPERNOVA pattern, helps...

The geodyna 980L HD Wheel Balancer from Hofmann is designed to help technicians balance wheels quickly and accurately. The balancer includes a 4/5 arm star adapter that helps ...

The Radians 6-mil Nitrile Disposable Industrial Grade Glove, No. RWG9406, provides barrier protection without the risk of natural rubber latex allergies due to its nitrile construction...

The Extreme Tools RX Series 84"Wx30"D 16-Drawer Roller Cabinet with Power Tool Drawer, No. RXQ843016RC, features a surge-protected power strip with two USB ports, 11 universal...

The Induction Innovations Mini-Ductor Venom HP is the fourth generation of the Mini-Ductor handheld induction heater. The Mini-Ductor Venom HP is the highest-powered induction...

The Car-O-Liner CTR 9 Resistance Spot Welder is fully automatic and features a lightweight transformer gun with a 355-degree swivel handle and ergonomic grip. The gun is supported...

The Portasol Pz50 Heat Shrink & Soldering Kit is designed for creating and protecting electrical connections, with a butane powered iron that can be used to solder and heat...

The RGX Pro 332 Cordless Sander with 3/32" Offset from Evergrade is ideal for body shop professionals, offering the power and performance of a pneumatic tool without requiring...

The 24V Gear-Driven Orbital Polisher, No. FX3331, from FLEX Power Tools, takes on a wide range of polishing jobs—from heavy duty material removal to delicate finishing work...

The AIRCAT 0.75hp Angle Disc Sander with Spindle Lock, No. 6281, features a built-in male 1/4" by 24 spindle that directly connects 2" or 3" backing pads to the tool...

The Forney Industries 190 AC/DC MP Welder, No. 300, offers AC/DC TIG, MIG, and stick welding capabilities, allowing it to handle a variety of metals, including aluminum, steel...

The SATAjet X 5500 from SATA Spray Equipment features the X nozzle system, allowing users to handle all paint systems and application recommendations. It uses a whispering nozzle...

The Paint Rescue Pick, No. PRP1, from VIM Tools, features a retractable barbed needle that allows the user to easily remove dust, lint, or any other contaminant on a fresh clear...

The Mac Tools 3-pc and 4-pc Trigger Release Locking Pliers, Nos. MLPTR3SET and MLPTR4SET, are made out of high-grade steel for durability and performance. The pliers feature a...

The Milwaukee Tool M18 FUEL 5" Random Orbital Sander features an orbital sanding motion with a 3/32" diameter. The sander has five-mode speed control ranging from 12,000 OPMs ...

The Killer Tools Shortwave Infrared Curing Lamp (2400W), No. ART2400, features a 2400W twin-lamp that uses shortwave infrared to penetrate down to base metal and cure paint, primer...

The Norton Premium Automotive Masking Tape is optimized for the paint masking process, delivering sharp paint lines and protection in collision repair applications including spray...

The TEXA USA RCCS3 EVO ADAS Calibration System offers HD 4K target representation that meets OE specifications with CCD sensor alignment checks, three-axis laser measurements,...

The Snap-on Ignite 360-degree Welding Helmet, No. WELDIGNGRANITE, offers maximum peripheral awareness without constant head movement with its 180-degree field of vision. The extra...

The Dent Fix Equipment EZ Hole Punch & Lens Hole Maker XL, No. DF-EZ10XL, is a precision-engineered toolset designed to punch holes in plastic bumpers cleanly and quickly....

The Ingersoll Rand H3111 IQV20 Cordless Heat Gun features two airflow speeds up to 10cfm, variable heat control settings up to 1022 degrees F, and a dual-speed slide switch...

The Autel IA700 Advanced Modular ADAS Calibration System features a modular, compact design that can be quickly disassembled for transport or storage. It uses a robotic crossbar...

The Omega Clip Removal Tool, No. 9369, from CTA Tools, is used for the removal of Omega clips which hold body panels of the vehicle typically found on various Volkswagen, Audi...

The 3-lb Drilling Hammer Pro, No. 63013, from Titan Professional Tools, features a cross-pattern strike design that concentrates the strike force into a smaller surface area, ...

The Matco Tools 28-oz. and 45-oz. Dead Blow Hammers, Nos. DBH28 and DBH45, feature non-marring, easily replaceable PU faces for increased durability and hammer life. The heads...

The ADAS Recalibration Unit, No. DAS3000-1, from Bosch is designed to be a complete for shops to recalibrate vehicle camera and radar systems. Robust camera targets with an integrated...

The Champ Pro Panel Tower Paint Stand from Auto Supply is designed with flexibility, durability, and mobility in mind. This tower allows the user to refinish both sides of any...

Reviewed by Benedict Grubner, technician at Mercedez-Benz of Burlington in Burlington, Massachusetts.

The Steck Manufacturing 5-Piece Clip Lift Set, No. STC21470, is ideal for prying under tight fasteners, clips, door panels, trim, and more. The lifters feature a high-polish...

The Multimatic 220 AC/DC, No. 907757, from Miller Electric offers users the ability to switch welding gas, polarity, and welding processes automatically while recalling the last...

The ADAS Radar 3-in-1 from Launch Tech USA offers a solution tailored for technicians and shops specializing in radar systems. It enables essential calibration capabilities without...

The Polyvance Compression Roller, No. 6144, is designed to reduce the finishing time and enhance the strength of plastic welds by smoothing and compressing the joint between the...

The OEMTOOLS 20V MAX Li-ion Reciprocating Saw, No. 24491, uses a high-capacity 2.0Ah Li-ion slide battery for longer life and more power. Designed with an electric brake that ...

The Performance Tool 6-pc Mini Panel Removal Tool Set, No. W83200, is designed with an extra slim profile and unique shapes to easily remove small trim parts and panels. This ...

The Solder-It Butane Blow Torch Kit with 2 Nozzles, No. PT-620CR, has an adjustable airflow that produces a soft and solid flame. The torch features a base designed for handsfree...

The MIG Welding Gloves from Mac Tools feature double-stitched seam for additional strength and a reinforced palm pattern. Made with premium leather, the gloves provide increased...