Modern vehicle air conditioning systems now have several different configurations and can be damaged if the proper procedures, refrigerants, and oils are not utilized.
The Milwaukee Tool 80-pc Shockwave Impact Duty Driver Bit Set, No. 48-32-4094, are designed to provide users with extreme durability for the most demanding applications. The Wear...
The GEARWRENCH 120XP Locking Flex Head Ratchet is designed to access hard-to-reach fasteners. The locking flex head allows for nine locked and unlocked positions for adjustable...
The NextLED Undercar Light, No. NT-6648, is designed to work in low-profile situations. With its compact design, it allows users to place it under any vehicle or crawl space. ...
The Cat Footwear Impact Waterproof Work Boot is designed for the modern-day worker. Made with ReVive Tech, the work boot is engineered to provide comfort and support with lightweight...
The KEEN Utility Reno Work Boot delivers a lighter, faster work boot steeped in outdoor tradition, but designed for the demands of the modern job site. The versatile boot features...
The Ledlenser P7R SE (Special Edition) Flashlight takes the company's P7R Flashlight and gives it more illumination power (1,100 lm), a further beam distance ( 200m), and a longer...
The Rotary Lift LT33A Air-Hydraulic Lift Table is designed to service batteries on hybrid and electric vehicles. The LT33A single section scissor lift design has a wide, stable...
The Oni Tools Sheppard M110 Gear Box Pitman Arm Puller, No. ONI349T, is designed to easily remove pitman arms on Sheppard M110 steering boxes with its high-strength steel casting...
The Performance Tool Harmonic Balancer Puller, No. 160, is designed to remove balancers, pulleys, and gears. It features four slots in the yoke, allowing for two or three-hole...
The Renegade I-Series 4824 Pass-Through Wash, Rinse, Dry Parts Washer System is designed to deliver multi-stage continuous cleaning efficiency to clean and dry heavy multi-ported...
The Thexton Extended Back Probe Spoons, No. 914X, are designed to access electrical circuits from the rear of the connector to prevent piercing wires and possibly damaging the...
The BendPak Mobi-EVS EV4000SL EV Battery and Powertrain Lift Table is a push-around full-rise scissor lift table that is ideal for EV service and battery pack replacement. The...
The Mastercool Black Series Compact 2-Way Digital Manifold Gauge Set performs pressure and temperature calculations for up to 91 different refrigerants, including R-134a and R...
The CTEK CS FREE Solar Panel Charge Kit works with the CS FREE 4-in-1 portable charger without connecting to a power outlet, so you can charge and maintain your vehicle battery...
The AIRCAT 1/2" Composite Impact Wrench, No. 1125, weighs 3.8 lbs and offers 1,250 ft-lbs of loosening torque and 1,000 ft-lbs of maximum torque. Other notable features include...
The Innova Electronics OBD-II Scan Tools and Dongles Software Update includes coverage and support for vehicles through model year 2022, added functionality, and enhanced RepairSolution...
The Mueller-Kueps LED Penlight, No. 904 980, features a 3x zoom lens for wide or narrow beams. With a 40m beam spread and ability to emit up 260 lm, the penlight is ideal for ...
The AutoEnginuity Giotto Version 21.0 for the Windows platform offers enhanced 23MY coverage and improved general support. Other highlights include new enhanced domestic support...
The Titan Professional Tools Non-Aerosol Sprayer is designed to help eliminate dangerous or harmful propellants. It features an operating pressure of 80 to 150 psi and is refillable...
Compu-Lube from Fluoramics is a lightweight synthetic oil designed to safely lubricate electronics, computers, and high-speed mechanisms as well as power tools, automotive electronics...
The JET Tools JLA Compact Lever Hoist Series include three models: 0.75-ton, 1.5-ton, and 3-ton. All feature a compact design, allowing users to get into tight areas. With safety...
Magid VersaTek Work Gloves feature a palm coating engineered to read the environment and adapt to amplify the worker's grip when working in wet, dry, slick, abrasive, or oily ...
The Streamlight Stinger Color-Rite is a rechargeable LED flashlight that uses a high color rendering index (90 CRI) LED for enhanced visualization under low light conditions, ...
The GEDORE GDA Solution Cordless Bolting Tool is ideal for smaller bolting needs. Compact in size, the bolting tool features a sunlight-readable color display, brushless technology...
Mayhew Tools' Made in the USA Screwdriver Product Line includes over 100 SKUs and are available both individually and in sets. Notable features include ergonomic acetate tri-lobular...
The PhysiCAN SnS GRIP Tester from Sital Technology is a portable USB board that is based on the company's patented Safe and Secure (SnS) technology for CAN bus data buses. By ...
The Performance Tool 350+LM Firepoint X Li-ion Duo-Light, No. W2677, features a heavy duty design with improved thermal efficiency. The duo-light includes a side-emitting worklight...
The STKR TRiLIGHT ShopLight V2 combines the features of a shop light with the benefits of a drop light. It quickly transforms from a 360-degree 5,000 true lumen drop light into...
The Channellock 10" WIDEAZZ Adjustable Wrench, No. 10WCB, features a wide 2" jaw opening to support large sized nuts and bolts. The combination of a smart and comfortable tapered...
The Mueller-Kueps Multi-Cleaner, No. 460 300, is designed to easily clean brakes, exhaust, and more. With replaceable heads, the tool removes the need to buy multiple tools. The...
The CTA Manufacturing BMW/MINI Timing Chain Tool Kit - N12, N14, and N16, No. 3770, features specialty tools required to perform timing service and repair, including camshaft ...
The OTC EGR Valve Puller, No. 5865, is designed to remove the EGR valve on 2010 MaxxForce 10,9, and DT engines as well as 2013 N9 and N10 with SCR engines. The tool is similar...
The Matco Tools 3-pc Indexing Pry Bar Set, No. IDPB3G, are optimal for engine bays and chassis work. The set includes three lengths: 8", 12", and 16" and sport a green highlight...
The Matco Tools Pro-Charge Wireless Rechargeable Folding 850 lm Worklight, No. PCFOLD, is a versatile worklight that offers three light sources, including a 400-850 lm main light...
The Vessel Rechargeable Ball Grip Screwdriver with 25-pc Bit Set, No. 220USB-25U, is ideal for working in tight areas. The cordless screwdriver can be used manually for higher...
The Milwaukee Tool 3/8” Drive 9” Flex Head Ratchet has a 4-degree arc swing that provides technicians the adaptability to work in spaces with different angles. The ratchet head...
The Bosch EV3000 30kW DC Fast Charger is ideal for commercial, workplace, fleet, and public charging. Compact and wall mountable, it will charge a typical passenger vehicle from...
The Exair 3/8 NPT HollowStream Cone Liquid Atomizing Nozzle provides a hollow cone spray pattern for pressurized liquids. The nozzle is ideal for cooling, cleaning, dust suppression...
The Lisle Corporation Stretch Belt Installer for Double Pulleys, No. 59350, is designed to install the main stretch belt on extra-deep double pulleys. Works on 2011 and newer ...
The Snap-on 3,000 Lumen Underhood Slim Light, No. ECUHE300, is an extendable, low-profile light built with accessibility and versatility. With padded 4.8" hooks and a 48.4-80"...
The Forney Industries Fornair 4.5 CRM Air Compressor, No. 555, is built to last with its 4-gallon steel tank for durability and lower rpm output for longer motor and pump life...
The SP Tools USA Compact COB LED Work Light, No. SP81448, is ideal for any workspace with its 360 degree full swivel head and magnetic base. The high-powered 100 lm to 700 lm ...
The SP Tools USA 6-pc Premium Plier/Cutter Set with EVA Foam, No. SP32916, contains six commonly-used pliers, including 10" quick-snap, 8" combination, 6" and 7" HD diagonal cutters...
The Dent Fix Equipment GLUEMAX Glue Repair Station, No. DF-GM/DXE, is a pulling station equipped with both cold and hot glue pulling options to repair damage in automotive steel...
The E-XTEQ 1012EVO Battery Charger and Maintainer is an automatic 12V charger with quick diagnostic for flooded, AGM, Li-ion, EFB, Deep Cycle and more chemistries. It provides...
The H&S Autoshot PDR Blending Hammer, No. UNI-7804, features a 19.25” carbon fiber handle that has ideal weight/balance for knocking down high spots or blending panels. The anodized...
The JohnDow Industries Static Grounding Reel, No. JDI-SGR75, is designed to work with fuel products needing a grounding wire. Extended to 75', the easily transportable, compact...
The Launch Tech X-431 Torque 5 is a tri-function device that serves as the VCI for OBD diagnostics in addition to a digital multimeter and a two-channel oscilloscope. The bidirectional...
The Makita USA 40V Max XGT Cordless Work Light, No. ML009G, delivers bright illumination, versatility, and convenience. The ML009G has three modes of operation that provide 10...
The Milwaukee Tool REDLITHIUM USB 400L Neck Light, No. 2117-21, is ideal for delivering lighting for inspection work and general tasks. It adapts to users' lighting needs with...
The updated Tool Aid Body Hammer Repair Kits, Nos. 89450 and 89470, now have specific color cases for less chance of cross-contamination. The hammers and dollies are the same,...
The Snap-on Flat-Oval Adjustable Creeper, No. JCW67O, includes a hinge mechanism that allows one-hand height adjustment to make positioning the headrest easier and more comfortable...
The Homak Manufacturing 43” Big Dawg 3-Drawer Service Cart features a 25” deep design with three drawers and a bottom tray. Tray-to-drawer distance of 12.5” maximizes storage ...
The Cornwell Quality Tools blueION COB Skinny Rechargeable Worklight is now available in green and yellow. The 1/2" ultra thin light emits three-way light functions: Full power...
The Fenix Lighting PD25R Rechargeable Flashlight produces a maximum 800 lm from an included 16340 rechargeable Li-ion battery. The flashlight features a tail cap switch for on...
The Davinci 8000 Rechargeable Flashlight from NEBO Tools is constructed from anodized aircraft-grade aluminum, and emits up to 8,000 lm. The rechargeable light is IP67-rated and...
The K-Tool International 650 lm COB Wireless Inductive Charging Work Light, No. KTIXD5534, is a dual mode light that uses COB technology to provide a clear, bright light with ...
The Maxxeon MXN01021 is rechargeable and offers three-way lighting capabilities for versatility, including front and back floodlights and spotlights on the tips. The folding light...
With its sleek silhouette and integrated pocket clip, the Coast PM50R Rechargeable Work Light is both versatile and practical as an everyday carry. The flashlight is built to ...
The SABER 500 Lumen Foldable Thin Light, No. 80448, delivers a wide and bright lighting area. The light features a rotary switch that provides variable brightness of 100 to 500...
The Philips Xperion 6,000 LED Work Lights from Lumileds feature 6,000 K color temperature and resistance to impact, water, and solvents. Equipped with integrated magnets and 360...
The Grote Industries BriteZone Handheld LED Work Lamp, No. BZ421-5, features a digital readout that lets users know precisely what battery charge level is left. The magnetic polymer...
The BendPak LITESTIX is a bright, versatile LED worklight powered by a rechargeable lithium battery to offer complete portability. It uses dual 90-degree swivel handles equipped...
The Pro Spot 5,000 lm COB LED Rechargeable Area Light from Mac Tools provides five adjustable lumen outputs ranging from 500 lm to 5,000 lm. It features a 180 degree rotating ...
