September 2025

Features 14 rare earth magnets for a reliable grip on tools and parts.

Don’t let a technician’s experience intimidate you; instead, use that experience to your advantage.

Features built-in magnet.

Distributors share tips on how to handle difficult customers.

Includes USB-A and USB-C ports, 15 ultra-bright LEDs, and an IP65-rated housing.

What mobile tool distributors need to know before buying.

The ESCO HD Stud & Hub Cleaner, No. 50172, is a dual function tool engineered to clean both wheel studs and hub mating surfaces. This heavy duty tool improves service efficiency...

The M18 TOP-OFF Charger and Power Supply, No. 2847-20, from Milwaukee Tool is the most compact M18 charger, up to 65 percent smaller than traditional kitted chargers. Designed...

The Associated Equipment Wheeled Battery Charger and Analyzer, No. 6021AGM, is an all-in-one charger, tester, and analyzer designed for automotive and fleet service. It delivers...

The Autostacker by BendPak 48" Extended Approach Ramps makes loading low-slung vehicles onto Autostacker lifts safe and easy. The ramps are 18" wide, making them compatible with...

The Air Hammer-Powered Tommy 475 Wheel Hub Puller, No. PMXTOM475PRO, from ProMAXX Tool by Milton is designed to save technicians time with no more control arm teardown. It pairs...

The Ascot Supply 1/2" Drive Super Duty Air Impact Wrench, No. 153-23120, features a 2" extended anvil, a twin hammer mechanism, and a full teasing trigger for better user control...

The Mayhew Tools 4-pc Demo Tool Set, No. 14050, includes a 3/16" pin punch, a 1/4" pin punch, a 1/4" center punch, and a 7/16" pry chisel. Each tool features a tempered alloy ...

The ESAB Victor Medalist 350 Classic Utility Kit features Victor heavy duty G350 oxygen and fuel gas regulators, a heavy duty Victor combination torch, a 1-101 series size 2 cutting...

The 2-pc Patented Locking Pliers, No. FRLP100, from VIM Tools are made of CRMO (chromemoly steel) and feature bi-directional jaws. Araditional locking jaw with vertical cut...

As mobile dealers, you might make stops at all sorts of different places. This blog by TOPDON's Haakan Light focuses on the tools you'll need if you're looking to add agricultural...

Taking over a previous distributor’s route can be intimidating, but if you understand where they succeeded (or failed), then you can find success too.

The Essential Pry Bar Station and Long Pry Bar Holder Pair from Tool Truck Essentials consists of the Essential Pry Bar Station, which holds four pry bars or cabinet screwdrivers...

The 8-pc Flip Socket Set, No. 13430, from Lisle Corporation includes double-ended flip sockets with two hex sizes in each socket. This kit is designed for the removal of standard...

The Milwaukee Tool PACKOUT Rack Kit, No. 48-21-8070, is designed to eliminate the frustrations that come with disorganization and tool movement during transit. The sliding drawers...

The Cool Boss CB-19SL Portable Evaporative Air Cooler blows chilled air at a volume of 6,840 cubic feet per minute. The CB-19SL stands at just over 44" tall and weighs 40 lbs ...

Distributor Kyle Spoelstra has found success in the beef jerky business, a great addition to any tool truck!

The TC002C Duo from TOPDON is universal USB-C compatible and designed to work with all USB-C smartphones and tablets. It features advanced thermal clarity, 256 x 192 IR resolution...

The CTA Tools Magnetic Flex Tray, No. 5060, holds a wide range of components, including bolts, nuts, washers, spark plugs, oil filters, screwdrivers, pliers, ratchets, and more...

The ProTac 2.0 HP from Streamlight is a tactical flashlight that delivers 85,000 candela for downrange illumination. The light offers nearly five times the distance output of ...

The 3-pack Stand-Up Tool Bag from KNIPEX is equipped with colored loops in red, blue, and yellow for easy identification and organization of three of the most popular wire nut...

The Shockit XL Crows Foot 2-Pack Set (16-pc SAE + 16-pc Metric), No. LT1915XL, from LTI Tools by Milton, delivers air-hammer-driven hypersonic vibration, perfect for seizing stubborn...

The Twin Cam Inner Cam Bearing Remover/Installer Kit from OTC Tools contains the tools needed to remove and isntall inner cam bearings without damage to the crankcase. The bearing...

The X-TREME Grip Sockets from SP Tools USA feature Center Drive technology, allowing the sockets to undo bolts up to 90 percent rounded off by applying pressure to the center ...

The Coxreels PC10 Series Model Reel, Nos. PC10-3016-H, PC10-3016-M, and PC10-3016-K, is an LED light featuring a variety of industrial-grade features and options including a 50...

The 6-pc 4WD Locknut Socket Set, No. 839, from Cal-Van Tools, is a 1/2" square drive set that allows technicians to use ratchets, breaker bars, and torque wrenches, and the set...

The Cal-Van Tools 6-pc Heavy Duty Swivel Type Oil Filter Wrench Set, No. 99100, features a swivel handle that allows users to access filters in hard-to-reach areas. Its wide dimpled...

The Carbyne Tools 28-pc Tamper-Proof Hex Bit Socket Set, No. 3101575, features a full range of SAE and metric pin-in-hex sizes. Each bit is precision-machined from S2 steel and...

The Sharktooth Sway Bar Plier, No. MLSTSBP7, from Matco Tools are engineered to deliver a secure grip with their 3-point jaw design that effectively holds stripped and rounded...

The VIM Tools Emblem and Wheel Weight Removal Tool, No. EWRT1, is designed to remove stick-on wheel weights, emblems, decals, or anything else held in place with double-sided ...

The Flexible Magnetic Strip & Bowl, No. SXMAGPACK, from SUNEX Tools, features a high-quality outer PVC layer that safeguards surfaces from scratches and damage while being...

The Matco Tools SIDEKICK Ready Worktable, No. MSCXWT, features a quick-adjust lift height mechanism that allows for easy height adjustments. The table is built with heavy duty...

The Positioning Jack Storage Rack, No. PJ15-RACK, from OTC is designed to hold up to four positioning jacks (sold separately), either mechanical or hydraulic versions. The...

The Auto-Grip Air Chuck, No. PN25001, from Ken-Tool is designed to stay air-tight under pressure. It includes one-button quick release. The air chuck can rotate 360 degrees for...

The CTA Tools Cummins Front & Rear Crankshaft Seal Remover & Installer Master Kit, No. 5085, is a comprehensive kit for installing and removing the front and rear crankshaft...

The BluBird Heavy Duty Air Hose Reel All-In-One 3/8" x 50' is a patent-pending, all-in-one hose reel engineered to provide unmatched versatility, convenience, and safety. Designed...

The 79" Double-bank Arca Series Roller Cabinet from Cornwell Quality Tools features a 54" W by 22" D by 10" H powered drawer that is placed higher in the cabinet than traditional...

The Extreme Tools RX Series 84"Wx30"D 16-Drawer Roller Cabinet with Power Tool Drawer, No. RXQ843016RC, features a surge-protected power strip with two USB ports, 11 universal...

The K-Tool International 30" Adjustable Work Table offers a total capacity of 200 lbs and a worktop capacity of 178 lbs, and it features a top tray, durable drawer liners, and...

The 8-pc Battery Terminal Service Kit, No. 4631, from OTC includes essential tools such as a battery terminal puller, a 3-way battery post cleaner, battery pliers, and various...

The Vessel 11-pc 2 Way-Speed L-Handle Set, No. SLH21U includes five 1/4" square sockets (8mm, 10mm, 12mm, 13mm, and 14mm) and five 1/4" hex bits (+1, +2, +3, SL4, and SL6...

The Ko-ken 3-pc 1/2" Square Drive Double-Ended Socket for Damaged Wheel Nuts/Bolts, No. 14219M, is a socket set designed for removing damaged or swollen lug nuts and bolts. The...

The Power Probe DM300AUTO Automotive Test Meter can measure current directly up to 30A and can measure and display the current flowing through a fuse without requiring the removal...

The TOUGHSERIES 18-pc Metric Combination Wrench Set from DeWalt includes wrenches featuring powerjaw technology that allows for 30 percent more torque on rounded...

The Ford 6.7L Power Stroke EGR Tube Broken Bolt Repair ProKit, No. PMNXN200PRO-008, from ProMAXX Tool by Milton, includes 8mm hardened steel inserts for 6.7L diesel engines from...

The Ascot Supply 3-in-1 Extractor & Inflator Tool, No. 469-00443, efficiently removes and installs valve cores and can be used to inflate tires as well. It has a 1/4" threaded...

The Palm Air Impact Wrench from Capri Tools is available with either a 1/2" or 3/8" drive. The wrench features 405 ft-lbs of maximum reverse torque in an ultra-compact package...

The PV-01 Non-Marking Pipe Vise from Arndt Enterprises allows users to work on stainless steel pipe projects without scratching or denting the pipe. It features the capability...

The Start•All Jump•Pack 10,000A from Goodall by Vanair, a Lincoln Electric Company, offers up to 10,000A and 133200 joules. It can start engines up to 16L and charge...

The BendPak MaxJax Reclining Creeper Seat, No. 5160119, features a gas spring-supported backrest that can seamlessly adjust from 0 degrees to 70 degrees in 10-degree increments...

The Mac Tools 7-Drawer Drop-Top Cart with 49" Vertical Power features a vertical PowerTech feature with 3 sizes of adjustable tool holders and an integrated power strip. The drop...

The Mobile Tool Cart, No. JDI-MBS1-TC, from JohnDow, is designed for mobility and convenience, keeping tools organized and within reach. The cart features locking swivel casters...

The BT238 from DHC is a microprocessor-controlled digital battery and electrical system analyzer that produces accurate test results in two seconds. It features an easy-to-read...

The Atlas Automotive Equipment Spray Wash Cabinet is designed to clean automotive parts and features 19 high-pressure spray jets. The cabinet has a 50-gallon capacity tank and...

The Homak Mobile Diagnostic and Testing Terminal is an all-in-one workstation with an adjustable angled surface, a pull-out shelf for easy access, and a cordless power tool holder...