TSB: Chrysler Hub Nut Torque Specification

This bulletin applies to 2017-2024 Chrysler Voyager vehicles built on or after June 24, 2017. The front halfshaft hub nuts need to be re-torqued to a new spec of 228 ft-lb (310 Nm). The original lower torque value has the potential to allow the hub nuts to loosen.

Caution! DO NOT torque the front halfshaft hub nuts to the new higher value on vehicles built on or before June 24, 2017, as they have a halfshaft stem that is not strong enough to support the higher torque spec.