This bulletin applies to 2020 Jeep Gladiator vehicles built on or after April 12, 2019, and on or before May 16, 2019, equipped with a 3.6L V6 24V VVT engine.
Replace the fuel tank with P/N 68332305AC and O-ring 55366298AA. Clear all DTCs. Labor time is estimated at 1.5 hours.
This bulletin applies to 2020 Jeep Gladiator vehicles built on or after April 12, 2019, and on or before May 16, 2019, equipped with a 3.6L V6 24V VVT engine.
The MIL may be on, accompanied by DTC P0461 (fuel level sensor one performance). In addition, the fuel gauge may not be accurate and/or the fuel gauge may be stuck.
Replace the fuel tank with P/N 68332305AC and O-ring 55366298AA. Clear all DTCs. Labor time is estimated at 1.5 hours.
Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety ofspecialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.
