May 2024

The NWS Pliers Wrench is made for tightening and loosening bolted connections.

This Mac Tools tool truck has it all – a tool chute, side cameras, storage boxes, and a customized workspace to top it off.

The light uses either a rechargeable battery or a plug-in with AC power for versatility.

The kit extracts stubborn, stuck copper compression seals, safeguarding the engine head from potential expensive damage.

The 8" x 10" Flexible Magnetic Mat from SUNEX Tools is designed to hold up to 40 lbs.

By equipping themselves with many of these essential diagnostic tools, professionals can ensure they are prepared to tackle the challenges posed by modern vehicles.

The Thexton Lift Alignment Tool, No. 962, is designed to streamline the positioning of lift arms to vehicle lift points. With the capability to position both front and rear arms...

The Cornwell Tools 3-pc Indexing Pry Bar Set, No. PBR3PC, includes an 8", 12", and 16" pry bar, each with a multi-angle adjustable head to provide optimal leverage for various...

The Mac Tools Angled Wire Crimper/Cutter/Stripper, No. WSC8B, are multi-functional pliers designed to crimp, cut, strip, and grip, with a long nose, and 100-degree angled head...

The AQUAMAT i.CF from Kaeser Compressors provides clean and effective condensate separation for flow rates up to 3,300 scfm. The i.CF is designed to maximize efficiency, simplify...

The LED Rechargeable Penlight, No. 312-07179, from Ascot Supply combines laser and UV functionalities. It features a top UV light with a wavelength of 365NM, alongside a side ...

The In-Line Wire Stripper, No. 19150, from Tool Aid automatically adjusts to strip 8-30 AWG PVC insulated wire. Built-in cutters on the stripper can cut through 10-30 AWG PVC ...

The Magnetic Air Hammer Bit Holder from Tool Truck Essentials is designed to fit 36 bits and measures 14.25" by 6.25". The holder is made from CNC-machined high-density polyethylene...

The TS001 Thermal Imager from TOPDON is a long-focus Android thermal imager with a 9mm lens. The TS001 has an infrared resolution of 256x192 and a 25Hz frame rate. The adjustable...

In this video, Observer Tools demonstrates their Dual-Flex Ratchets in the sizes 1/4" (No. OBS-SR14) and 3/8" (OBS-SR38).

The Observer Tools Dual-Flex Ratchet is a multi-faceted ratchet that is designed to adapt to any situation. It features a pivoting handle, a rotating head, and a square drive ...

In this video, Lokithor demonstrates the ApartX.

The Philips Xperion 3000 Headlight, No. LUMX30HEADX1, from Lumileds features a 200 lm spotlight for the user to direct the light where they need it. The 6,000-Kelvin light is ...

The Sensor Tap Series from Mueller-Kueps features a combination of steel strength, double coating, and six cutting edges that are designed to make it easy and efficient to cut...

The CTA Tools Benz 256 Crank Counter Holder Tool, No. 8820, is a precision tool for Mercedes-Benz 256 (gasoline/petrol) and 654 (diesel) engines. The tool secures the crankshaft...

The OEMTOOLS 3-Ton Long/Low Profile Jack, No. 24868, has a lift height of 3-3/8" to 24-1/4" and is ideal for low-profile vehicles, trucks, and SUVs. The 4.3" saddle with jack ...

The Matco Tools Long Barrel Pneumatic Air Hammer Kit in Teal, No. MT2916KT, delivers 2,300 BPM from a 3-3/4" piston stroke that is designed to provide powerful blows. The patented...

The CTA Tools Benz Oil Level Dipstick, No. 8824, is used to accurately measure engine oil level and to check the length of the oil dipstick guide pipe. This tool is designed to...

The ARES Tool 12-pc Master Cylinder Adapter Set includes 12 adapters all designed to work exclusively with ARES 70921, 18051, and 18053 Brake Bleeder tools. Round adapter sizes...

The Vividia BD-5030i Borescope from Oasis Scientific is a semi-rigid USB borescope with a .19" diameter probe head and an 11' long tube. It is equipped with both a front and side...

The Matco Tools 10-pc Top Torque II Screwdriver Set - Teal, No. SSPCTT10C features blades that are molded into the handle and have a wide forged butterfly in the end. Built from...

The PermaSafe Industrial Nitrile Gloves have a thickness of over 6 mils, with textured palms and fingers. According to PermaSafe, these gloves are designed to be thicker and more...

The SLAYER from Coast is a rechargeable and waterproof flashlight with an all-aluminum frame. The flat, rectangular shape allows users to keep the light in their pocket and a ...

The All-In-One Tool Kit from Just Clips is designed to remove, clean, and install new snap rings on impact wrenches. Each kit contains one Snap Ring Plier with universal swivel...

The 2-pc Spring Loaded Oil Cooler Disconnect Set for Ford, No. 39100, from Lisle Corporation features a special stepped design to fit connectors. Users simply push the line toward...

The Tuxedo Distributors iDEAL EV/Hybrid Lift Table, No. LT-EV2500AH-X incorporates multi-adjustable and directional EV-insulated platforms for controlled lifting and lowering ...

The Lisle Corporation Torque Adapter 25 N.m, No. 61860, is designed to help prevent overtightening plastic and aluminum oil filter cannisters and filters. This adapter turns any...

The IQ Vise from Work IQ Tools features a ball and socket design that allows articulation and 360-degree rotation at any angle. It also includes a Quick Cam compression lever ...

The i70BT Automotive Diagnostic System from Foxwell is a diagnostic scanner with Wireless VCI Foxlink I. It inherits the same Foxwell advantages in car fault diagnostic tech, ...

The 14-pc Insulated Screwdriver Set from Dynamic Tools includes interchangeable blades, featuring a variety of Phillips, Torx, and slotted tips. Each tip is precision-machined...

The M18 Brushless 18" Fan from Milwaukee Tool provides air circulation over 50' and up to 13.5 mph. The 18" blade and brushless motor propels air, allowing for fast and efficient...

The Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit from ProMAXX is designed for technicians to remove stubborn fuel injector seals from...

The FastRatch 240 from STAHLWILLE features a patented technology of the "opening ring," meaning it can operate even in installation positions that are difficult to access. The...

The Universal Drilling Guide MASTER M6-M10 from Pichler Tools is designed for safe drilling out of broken stud bolts with thread sizes M6 through M10. The HARDOX-Drills are suitable...

The Tesla Jack Pads from SUNEX Tools are specifically designed for use on Tesla vehicles and are crafted from a one-piece molded rubber for a universal fit. The pads offer...

The 7-pc Hollow Magnetic Color-Coded Ratcheting Power Nut Driver, No. 32950, from Klein Tools includes six color-coded hollow power nut drivers (1/4", 5/16", 3/8", 7/16", 1/2"...

The 14-pc Micro Hand Tool Set from Mayhew Tools is a compilation of micro line products, including pry bars, picks, hooks, and screwdrivers (slotted, Phillips, and Torx). A custom...

The 1/2" Brushless Connected-Ready Hammer Drill/Driver Kit with CORE18V 4 Ah Advanced Power Battery from Bosch features a brushless motor that delivers 565 in-lbs of maximum...

The 26-pc SAE and Metric Long Arm Hex Key Sets, No. 98526BL and 98526L, from SUNEX Tools are made from CR-V steel and designed to withstand the test of time, according to the ...

The Soft-Shock Mallet from Dent Fix Equipment is designed to apply a strong striking force and avoid damaging or scratching parts. The mallet is intended for use on automotive...

The Lokithor ApartX features a built-in air compressor and an LIPO battery that has a 1,500A peak current, suitable for 7.0L gasoline and 4.0L diesel engines. The LO-LIPOX option...

The 13" Heavy Duty Hand Riveter, No. 86966, from GEARWRENCH is designed to install steel, stainless steel, aluminum, and copper rivets in multiple sizes. The double compound hinge...

The K-Tool International Rechargeable Neck Worklight, No. KTIXD5523, is water-resistant, oil-resistant, and grease-resistant. The light is half a pound with an IP54 rating and...

The 9-pc Tesla Die Set, No. DF-SPR/TESLA9, from Dent Fix Equipment, is designed for use in the application of 5mm self-piercing rivets. Included in the set are eight forming die...

The NWS Maxi MX Waterpump Pliers are drop-forged from chrome vanadium steel and then hardened and tempered for long tool life. The pliers feature a box joint design for stability...

The Spark Plug Boot Puller, No. C28234, from Performance Tool, is designed to help prevent damaging or separating wires and boots during spark plug removal. The puller features...

The Sorbothane Soft-Blow Mallet is designed to conform to surface irregularities, providing maximum surface contact without marring, denting, or hand jarring. The mallet is built...

The Streamlight Strion 2020 Rechargeable Flashlight delivers up to 1,200 lm, featuring both head and tail push-button on/off switches, an easy-to-use mode select switch for choosing...

The PowerDrive Drill/Driver Threaded Bit Adapter from Milton Industries, is a 1/4" adapter designed to access tight spaces such as engines, under the hood, or other hard-to-reach...

In this video, GripEdge Tools showcases their RPT Hex Bit Sockets. 

The Rogue EM 125i from ESAB weighs 28 lb and uses 115V primary power. The tool has a rated welding output of 90A at a 30 percent duty cycle and is optimized for use with .023"...

The Tool Aid 9" Sharktooth Sway Bar Pliers, No. 13590, feature a three-point jaw design to grip stripped and rounded fasteners, ensuring users have a tight hold at all times. ...

In this video, Beta Tools demonstrates its Zero-Reset Torque Wrench, No. 666. 

The Beta Tools Zero-Reset Torque Wrench, No. 666, is designed to eliminate the need for manual reset to zero. Thanks to upgraded components, the torque wrench no longer has to...

The Milton Industries 9-pc Insulated Pliers and Screwdrivers Tool Set, No. 1305-EV-02, is designed to help protect technicians from electrical-related accidents. The set includes...

The AIRCAT 1/4" Mini Angle Die Grinder, No. 6250, features a .3hp motor that produces 18,000 rpm free speed. Weighing just 1lb and measuring 5" in length, the 6250 provides added...

The EPPCO Grease Bully MDT Nitrile Gloves are chemical-resistant disposable gloves with a patented micro diamond grip textured surface that is designed to provide a better grip...

The FlexTorq 6” 4-in-1 Double-Ended Nut Driver, No. DWADENDEXT-2, from DeWalt features detachable sockets for quickly removing metal shavings to promote a long tool life. The ...

The Wrench Pro from Ernst Manufacturing is designed to save space in the toolbox by storing wrenches upright, fitting more tools in a compact space. The modular design snaps together...

The Mueller-Kueps Special Counter-Holding Wrench Kit, No. 431 030, is designed to access hard-to-reach nuts on a vehicle's strut mounting plate. It features a 13mm and 14mm wrench...

The ARES 6-pc 120-Tooth Metric Non-Slip Ratcheting Wrench Set, No. 35021, includes non-slip ratcheting wrenches in 10mm, 12mm, 13mm, 14mm, 15mm, and 17mm sizes as well as a durable...

The Platinum Tech 1/2" Drive Split Beam Torque Wrench, No. PLT-12250, offers a range from 40 to 250 ft-lbs, with 5 ft-lbs increments. It measures 24.2" in overall length and its...

The 13mm Bypass Wrench, No. BY13, from Assenmacher Specialty Tools is designed to assist in removing and replacing hard-to-reach Detroit Diesel Turbo bolts and nuts by going around...

The Hazet Torque Testers, Nos. 7901E, 7902E, and 7903E, are designed to offer a reliable control aid for torque wrenches. The 7901E has a fixed internal 1/2" square socket and...

The GripEdge Tools RPT Hex Bit Sockets are designed to prevent the rounding of good hex fasteners while being able to remove damaged ones. According to the company, the sockets...

The Strategic Tools & Equipment LOCKJAW Ratcheting Flare Nut Wrench is a patented, ratcheting open-ended flare nut wrench that works on metric and SAE nuts, including damaged ...

The TP150 TPMS Diagnostic Tool from Xtooltech USA integrates tire pressure programming, tire pressure diagnosis, and tire pressure matching. It supports activation of 315MHz to...

The Thexton Best Angle Back Probe, No. 960, is designed to access electrical circuits from the rear of the connector to prevent piercing wires and possibly damaging the circuit...

The Gray Tools 25-pc 1/4" Drive Insulated Socket Set, No. 15025-I, includes 12-point SAE sockets ranging from 3/16" to 9/16" and 6-point metric sockets from 4mm to 15mm. The sockets...

The 1/4" Pry Bar with Strike Cap, No. 35100, from Lisle Corporation is designed to remove seals, electrical connectors, O-rings, plastic caps, interior trim pieces, metal, and...

The Hazet Quick-Clamping Puller Set, No. 1750/5, features five of the most common quick-clamping pullers in one set: 1750-9, 1750-11, 1750-14, 1750-19, 1750-26. Each of the tools...

The M7 1/2" Torque Wrench with 20.7-154.9 ft-lb Range, No, TE-428210N, is used to apply specific torque ratings to nuts, bolts, and other fasteners. For use in repair industries...

The Autel MaxiCheck MX900 is an 8" touchscreen all-systems scan tool and service tablet, compatible with U.S., Asian, and European vehicles, 1996 and newer. The corded tablet ...

The Cal-Van Tools Light Bulb Pliers, No. 47, are designed to fit most mini and small automotive bulbs. Due to the bulbs' fragile nature, the pliers are outfitted with rubber-coated...

The Lang Tools 26" Internal Retaining Ring Pliers with Interchangeable Tip, No. 1489, are heavy duty pliers used to remove and install the large internal retaining ring in transmission...

The GEDORE Excentric Wrench is designed to remove and install axial joints and fits universally for cars and vans. The wrench offers direct mounting on the tie rod and one-handed...

The Titan Professional Tools 19-pc 3/8" Drive 6-Point Metric VDE Insulated Socket Set, No. 68100, features a fully insulated 3/8" drive reversible ratchet with quick release. ...

The Ranger TruSensor TS58R Universal TPMS Kit is designed to diagnose and program import and domestic tire pressure monitoring systems. Offering 98 percent global vehicle coverage...

The Dodge 4500/5500 Ball Joint Install Adapter, No. 18100-D45, from Schley Products is designed to support the 18100 Ball Joint Press to install the ball joint. The adapter locks...

The TOPDON TopScan is a pocket-sized tool designed to turn any smartphone into a professional-grade scanner. TopScan is capable of reading and clearing fault codes for over 60...

The CanDo HD Code Pro is a mid-line code scanner that will diagnose light to heavy duty commercial vehicles. The scanner reads and clear codes as well as performs DPF resets and...