The Milwaukee Tool Redlithium USB Stick Light with Magnet, No. 2128-21, features four output modes: front, back, dual, and inspection. Designed with 220 degrees of vertical light...
The OEMTOOLS 2L Pneumatic Vacuum Brake Bleeder Tool with Automatic Refilling Bottle, No. 22506, is designed to simplify brake service. The Brake Bleeder Kit accurately tests and...
The OEMTOOLS 5-pc Hose Removal Set, No. 26519, contains long and short, standard, and offset hooks. They can be used to remove hoses, moldings, clips, clamps, seals, O-rings, ...
The CTA Manufacturing Ford Crankshaft Rear Seal Installer - PowerStroke, No. 8229, is designed to install the crankshaft rear oil seal and wear sleeve. The tool services 2003-...
The Miller Electric Dynasty 300 Multiprocess Wireless Foot Control Complete features AC/DC TIG, pulsed TIG, stick, air carbon arc, MIG, and flux-cored processes. With its intuitive...
The ProMAXX PlierPull Locking Plier Adapters are designed to produce greater pulling power thanks to their quick slide hammer connectivity. They're ideal for repairs where a high...
The Davinci 8000 Rechargeable Flashlight from NEBO Tools is constructed from anodized aircraft-grade aluminum, and emits up to 8,000 lm. The rechargeable light is IP67-rated and...
The RSC24 Mobile Roller Cab from Beta Tools features a reinforced ABS worktop designed with eight holes for screwdrivers and is able to support top boxes. The Beta RSC24 evolved...
The Hunter Engineering WinAlign 17.1 Software Update provides two benefits for Hunter Quick Check Drive and Quick Check Commercial unmanned inspection system customers. First,...
The ATD Tools 4-pc 1/2" Drive Impact Extension Set, No. ATD-4864, has been heat-treated for strength and durability. Manufactured using quality chrome-molybdenum alloy steel, ...
The Electronic Specialties Super Relay Buddy, No. 194, is designed to provide an indication of the general health and functioning of the most common 4/5 pin 12V relays. It cycles...
The Dannmar D2-12C Symmetric Heavy Duty Two-Post Lift is a closed-top model which allows technicians to roll floor jacks, toolboxes, and other equipment underneath the elevated...
The Cool Boss Portable Evaporative Air Coolers Line from BendPak includes seven energy-efficient models designed to cost-effectively keep workers cool and safe from heat-related...
The Milwaukee Tool M12 Heated Hoodie is now available in both men’s and women’s versions. The M12 Heated Hoodie is designed to deliver heat built for complete comfort combining...
The Innova RepairSolutions2 App Update now offers functionality for individuals without Innova OBD-II scan tools. Users without an Innova scan tool can skip the "pair tool" function...
The Tire Mechanics Resource Air Operated Elevating Heavy Duty Tire Spreader uses shop air to easily lift and repair large truck tires. The pneumatic lifting table can raise the...
The OTC Pitman Arm Puller, No. 5857, allows for the removal of pitman arms from most Sheppard M-Series steering gears. Works in conjunction with the pitman arm retainer, which...
The OTC Front Seal Installer, No. 5863, is designed to install the front seal and wear sleeve on select Navistar VT and MaxxForce engines. Includes a seal installer cup and pilot...
The CTA 17-pc Deep Metric Socket Set, No. 1189, includes sizes 6mm to 21mm. With a 120mm length and depth, the sockets provide access to recessed areas with extra long bolts found...
The Launch Tech X-431 ADAS Pro Plus is designed to support the calibration of various ADAS systems in passenger cars from more than 50 vehicle manufacturers. The stand is made...
The Matco Tools 2-pack 6” Magnetic Collapsible Cups, No. MM6HCUP2, are designed to hold screws, washers, nuts, and bolts. Features a soft magnet bottom base that holds parts inside...
The Ingersoll Rand 2955 Series 1-1/2" Impact Wrench is designed to deliver heavy duty power, durability, and productivity. The 2955 Impact Wrench produces 4,500 ft-lbs of maximum...
The LTI Tools by Milton Bendix/Knorr-Bremse Air Disc Brake Pad Retainer Tool, No. LT891, is designed to provide a safe and easy way to remove the pad retainer when servicing Bendix...
The AIRCAT 812-RW 3/8” Impacting Ratchet provides 80 ft-lb maximum torque to handle a wide range of applications. Features include a 350 rpm run-down speed with built-in regulator...
The Spring Tools 5-pc Master Mechanics Set, No. 50X08, No. 50X08, is designed for mechanical and metalworking applications. The set includes a combination prick and center punch...
The Mayhew Tools 4-pc Micro Hook and Pick Set, No. 31098, includes a straight pick, 90-degree bent pick, dual angle pick, and a micro hook. Made in the U.S.A. and backed by a ...
The Ken-Tool Rust Rhino Hub Cleaning Tool, No. 30267, attaches to any power-driven tool (pneumatic, electric, or battery). It's capable of accepting a 1/2” square drive and has...
The VIM Tools Button Clip Disconnect Tool with Swivel Head, No. BCT1, fits securely and ergonomically in the palm of the users hand, and is used to quickly disconnect fuel, EVAP...
The Magid T-Rex Flex Series Lean Impact Glove, No. TRX449, is designed to deflect and absorb impacts. It features a machine knit cut A4,13-gauge Hyperon shell for breathability...
The Ascot Supply 20-Ton Air/Hydraulic Bottle Jacks feature a thick base to provide ideal support and stability in severe conditions. The quick connect feature on the air valve...
The Vessel Tool IMPACT BALL Torsion Bit 30+1-pc Set, No. IB31P02U, comes in a slide case. The product includes +1, +2, +3, SL4, SL6, SL8, SQ1, SQ2, SQ3, T10, T15, T20, T25, T27...
The KNIPEX 4" Pliers Wrench XS, No. 86 04 100, is a compact tool at just 4", with a jaw capacity of 3/4". Designed with smooth jaws that will not mar surfaces, the Pliers Wrench...
The Titan Professional Tools Stubby Adjustable Wrench, No. 12138, allows access into confined work spaces where standard length adjustable wrenches won't fit, the company says...
The Olsa Tools Ratcheting Wire Crimper eases strain on hands thanks to large, non-slip handles that are designed to ensure a strong and comfortable grip. The ratcheting action...
The EZRED 8" S-Shaped Quarter Stick, No. 4SS8, features a compact design to allow easy access inside tight corners. The tool is forged from chrome vanadium steel, and is ideal...
The Vessel Low-Profile Flat Plate Ratchet Screwdriver Sets, Nos. TX-76U and TX-79U, are ideal for use in very limited spaces. Both sets include a ratchet, a 2-pc internal bit ...
The Power Probe VT750 EV Safety Voltage Tester allows technicians to verify that power has been disconnected from an EV before servicing which is a critical safety test that is...
The Mueller-Kueps Sensor Tap Kit, No. 506 021, is designed to professionally restore the NOx sensor hole thread without damaging the exhaust system. The tools are for sensors ...
The Milwaukee Tool 4-pc Hose Pick Set, No. 48-22-9217, features an all-metal core for increased durability. Each pick has a specific angle for different applications while the...
The Matco Tools 3/8" Drive 9" Eighty8 Tooth Long Locking Flex Ratchet features a slim profile to allow access in tight areas and produces a swing arc just over 4 degrees, allowing...
The Snap-on Flat Jaw Locking Pliers provide ideal fastening power with its patent-pending Power Ring that increases thread strength and delivers a clamping force up to 5,000 lbs...
The Dynamic Tools 108-Tooth Ratchets are industrial-quality ratchets designed for budget-sensitive professionals. Featuring a 108-tooth gear with 3.5-degree arc swing, the ratchets...
The Mac Tools 1/2” Drive 50-250 ft-lb Direct Torque Wrench, No. TWV250DR, meets ASME B107.300 specifications with an accuracy of +/- 4 percent. The torque wrench features a direct...
The Malco Products Eagle Grip Locking Tools are forged from premium American steel to deliver strong and reliable performance. Made in the U.S.A., the tools were designed to meet...
The Cornwell Tools 120 Tooth Flex Head Ratchet, No. JRF120LHB, features a 120-tooth ratcheting design that provides a 3 degree handle swing. Its 180-degree, seven-position flex...
The Koul Tools Surseat P51B Flare Lapping Tool is designed to remove irregularities in flared tubing, leaving an ideal sealing surface. The tool features an easy-to-use clip mechanism...
The Century Drill & Tool Spring Loaded Pliers are available in long nose, diagonal nose, and bent nose styles. The spring loaded design makes for easy use. The pliers are made...
The Makita 40V Max XGT Brushless Cordless 2.1 Gallon Wet/Dry Dust Extractor/Vacuum, No. GCV01Z, is designed to provide a cordless solution for a range of applications. It functions...
The K-Tool International 12-pc Metric 120-Tooth Reversible Combination Wrench Set is a set of high-quality, non-slip, open-end wrenches that can remove and tighten nuts and fasteners...
The Lisle Corporation No Splatter Pad with Supports, No. 38800, protects work areas from messy oil splatters. The porous material of the splatter pad allows fluid to quickly pass...
The Lisle Corporation Brake Spring Bar, No. 40030, replaces brake shoes on heavy duty tractor and trailer S-Cam brakes. To remove the spring, slip the hook into the retaining ...
The Autel MaxiCharger AC Wallbox Commercial, No. MCC50AHI, is a 240V-50A Level 2 charger compatible with all EV and hybrid plug-in vehicles. It features a contemporary design ...
The Performance Tool 3-pc Pry Bar Set with Strike Cap, No. W2023, includes 12", 17", and 24" sizes. The tools feature thick ergonomically designed handles for comfort and secure...
The ATD Tools 2-pc Rubber Mallet Set, No. ATD-4020, features a soft yet durable head that is designed to deliver a blow with minimum marring or surface damage. Its high-strength...
The CTA Tools 11-pc Pro-Series Brake Bleeder Adapter Set, No. 3930, features durable, all metal construction adapters. The set services most make and models on the road today,...
The GEARWRENCH 33-pc Ratcheting T-Handle Hex Key Set, No. 83518, features interchangeable keys for wide range of uses and applications. The keys are made with alloy steel for ...
The Cementex Updated Double-Insulated Wrenches now feature a continuous outer layer of orange insulation to provide a smooth transition between the dual-layer and single-layer...
The Mueller-Kueps Heavy Duty Duo Handle Pry Bar, No. 276 342V2, features two ergonomic, soft touch and hammer resistant handles, allowing for two-handed use. Made with special...
The OTC Angled Wire Stripping Tool, No. 5950D, is designed with the stripping dies on the angled tip, above the pivot point, to give users the right angle to neatly strip or cut...
The Wiha Tools 93-pc XXL3 PRO Tool Set comes in the XXL3 Rolling Tool Case. The tool case is made from heavy duty construction, has all-terrain wheels, a 42" extendable handle...
The Tekton 3/8" Drive Folding Ratchets are designed for use in minimal access spaces, providing low leverage and high speed. The patent-pending ratchets use the company's 90-tooth...
Delphi Technologies Fuel Tank Cleaning Tool, No. FC02, is designed to clean a hard-to-drop fuel tank before installing a new pump module. Installing a new fuel pump in an old ...
The Sunex Tools Simple Torque Indexing Torque Wrenches are designed with a 16-position torque selecting mechanism that adjusts the torque and locks it into place with a simple...
The Platinum Tech 7-pc SAE Flare Nut Wrench Set, No. PLT-99700, is ideal for use on hex nuts made of softer materials. Its flare nut design allows for a better grip without slipping...
The ESCO Sheppard M100 Pitman Arm Puller, No. 40311, is designed to safely and easily remove pitman arms from the output shaft on Sheppard M100 gearboxes. It can be used with ...
The Cal-Van Tools Adjustable Indexing Trim Clip Pliers, No. 54, are designed to remove plastic anchors with center pins without causing damage to the pin or the anchor with one...
The Thexton Magnetic Strut Rod Lock, No. 939, is an upgrade to the company's Hood/Tailgate Prop, No. 430. It fits strut rods up to 9/16” in diameter and a magnet has been added...
The Marson HP-4x4 Multiplex Hand Tool from Howmet Fastening Systems features a patented design that allows this single tool to set in a variety of sizes of both aluminum and steel...
The Trusty-Cook 47 oz. Ball Peen Dead Blow, No. TC47BP, is ideal for machinists, mechanics, toolmakers, and metal stampers. The steel-faced hammer is threadless for durability...
The Schley Products High Pressure Ball Joint Press, No. 18100, is designed to remove and reinstall most press-in type ball joints equipped on late model Ford and Dodge full-size...
The Snap-on TRITON-D10 scan and scope tool is ideal for shop owners and general technicians that need scope functionality, intuitive diagnostic testing, and system verification...
The S.U.R.&R. Handheld Tubing Straightener, No. TS224, is designed to straighten 3/16" and 1/4" tubing. It can be used on aluminum, copper-nickel, and steel lines. It straightens...
The Anglo American Tools NES5 Tight Space Thread Restorer is a universal, external thread repair tool. The high speed stainless steel cutter floats in its position to enable the...
The Lang Tools 3-pc Hose Pinch Pliers Set, No. 1500, is designed with a self-locking feature that holds after pressure is applied. Simply pull the handles apart to release pressure...
The Hessaire MC61V Mobile Evaporative Cooler delivers 5,300 cfm with a quiet, power prop and covers 1,600 sq. ft. Hi-density Xel50 pads cover three sides, and adjustable top and...
