The OTC Motorcycle Lift, No. 1545A, is designed to raise and support motorcycles weighing up to 1,500 lbs. Its dual 17-inch rubber-coated skids accommodate large cruisers, while...
The OTC 2,000-lb Capacity High-Lift Transmission Jack for Trucks and Buses, No. 5078, features a low height of 41-1/2", allowing transmission to be rolled out from under the vehicle...
The 1,000-lb Capacity High-Lift Transmission Jack, No. TJH10, from OTC features universal saddle and adjustable corner brackets and safety chains for optimum positioning of the...
The 2,200-lb Capacity Low-Lift Transmission Jack, No. 5019A, from OTC features a 8-1/4" low height for aerodynamic trucks with low ground clearance. The special mounting adapter...
The OTC Lower Arm Prying Tool, No. 6007, is designed to allow technicians to easily move control arms and other components with this unique S-hook-shaped tool. Solid steel construction...
The OTC Engine Stand Drip Tray, No. 1750-DT, is designed to fit OTC 1750 and 1750A diesel engine stands. The tray fits between the legs of the REVOLVER diesel engine stand, without...
The OTC Drain Plug Pro Tool Kit, No. 5961, features an interchangeable design. The kit includes attachments for standard drain plugs, low-profile drain plugs, internal hex drain...
The OTC Tools Ball Joint Connected Adapter Professional Kit, No. CA6630, uses its extra-large C-frame with stainless steel ball bearings to securely hold cups and adapters, making...
The OTC 8,000-lb Lifting Bracket, Pair, No. 7102, offers an 8,000-lb lifting capacity and is ideal for heavy duty component handling, off-road and agricultural work, heavy...
The OTC Front Hub Puller for 4WD Vehicles, No. 6290A, is designed for the removal of the front hub assembly, which is necessary for wheel bearing or brake rotor service. It provides...
The new OTC CA7149 Starter and CA6630 Professional Ball Joint Connected Adapter Kits cover more vehicle models than competitive kits, with fewer adapters.
The kit contains a 3-jaw puller, four lengths of rods, a forcing screw with a 3/8” internal square, a 3/4” external hex, as well as an extra set of jaws for additional applications...
Compatible with OTC’s Powertrain Lift Table, the adapter mounts easily to provide safe and proper handling of differential axle assemblies during servicing.
The scissor-designed powertrain lift can handle loads including engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more.
In this Toolbox Topics episode, PTEN Editor in Chief Nadine Battah sits down with Brian Smith, Sales Manager for Bosch Mobility Aftermarket, to take a closer look at why mechanical...
The OTC Hub Grappler, No. 6575, is a complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle.
The EZ Fit Adjustable Tubing Straightener, EV Diagnostics Upgrade Kit, and Portasol-Patch are some of this month's most popular tools and equipment among auto repair techs.
The Clamp Probe Set, High Flow Air Blow Gun, and Hub Seal Puller Set are some of this month's most popular tools and equipment among auto repair techs.
The 10-Ton Collision Repair Set, No. 1515B, from OTC is equipped with a single-speed hydraulic hand pump that features an automatic overload system to prevent equipment damage...
The 2,500-lb Air/Hydraulic Powertrain Lift, No. 1595A, from OTC is designed to handle heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle...
The Twin Cam Inner Cam Bearing Remover/Installer Kit from OTC Tools contains the tools needed to remove and install inner cam bearings without damage to the crankcase. The bearing...
The OTC Caliper Wind Back Tool, No. 7339, features an integrated swivel handle that provides left or right wind-back capability for compressing calipers with integral parking ...
The Heavy Duty Wheel Step, No. 1734A, from OTC provides quick, easy access to under-hood components. The wheel step fits heavy duty vehicles (Class 7/8), installs in seconds, ...
The Positioning Jack Storage Rack, No. PJ15-RACK, from OTC is designed to hold up to four positioning jacks (sold separately), either mechanical or hydraulic versions. The...
The 1,000V CAT III Hybrid Multimeter with Insulation Resistance Test from OTC allows technicians to perform insulation and high-voltage electrical tests on modern vehicles with...
The OTC Tools Vehicle Positioning Jack, No. PJM15, is a single-car dolly that can lift and support up to 1,500 lbs to help safely move disabled vehicles. The ratcheting foot pedal...
The OTC Strut Tamer Safety Cage, No. 6637-5, attaches to the Strut Tamer with stand (No. 6637-ST), or behind the Strut Tamer (No. 6637) when wall-mounted, adding an extra layer...
The OTC Heavy Duty Snap Ring Pliers Set is designed to streamline in-shop service for the heavy duty vehicle technician. The heat-treated steel "circlip" pliers feature a...
The 2,000-lb Capacity High-Lift Transmission Jack, No. 5078, from OTC, is designed for trucks and buses. The jack features a foot-operated air pump that enables the operator to...
The OTC Power Train Lift, No. 1585A, is ideal for engine and transaxle service. The lift supports up to 1,250 lbs and features a compact design with swivel casters for easy...