Otc 5874f67048192

OTC, Bosch Automotive Service Solutions

28635 Mound Road
Warren, MI 48092
800-533-6127
507-455-7451
Visit Company Website

More Info on OTC, Bosch Automotive Service Solutions

Otc 5874f67048192

Diagnostic tools, A/C tools & equipment, battery chargers/testers, body shop tools & equipment, brake service tools & equipment, tire service tools, specialty tools, jacks & lifts. 

Products

Photo courtesy of OTC
product_images__20250717t162100
The 2,500-lb Air/Hydraulic Powertrain Lift, No. 1595A, from OTC is designed to handle heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle...
July 17, 2025
Photo courtesy of OTC Tools
product_images__20250702t163112
The Twin Cam Inner Cam Bearing Remover/Installer Kit from OTC Tools contains the tools needed to remove and isntall inner cam bearings without damage to the crankcase. The bearing...
July 2, 2025
Photo courtesy of OTC
Caliper Wind Back Tool, No. 7339
The OTC Caliper Wind Back Tool, No. 7339, features an integrated swivel handle that provides left or right wind-back capability for compressing calipers with integral parking ...
June 23, 2025
Photo courtesy of OTC
product_images__20250529t111115
The Heavy Duty Wheel Step, No. 1734A, from OTC provides quick, easy access to under-hood components. The wheel step fits heavy duty vehicles (Class 7/8), installs in seconds, ...
May 29, 2025
Photo courtesy of OTC
product_images__20250529t105941
The Positioning Jack Storage Rack, No. PJ15-RACK, from OTC is designed to hold up to four positioning jacks (sold separately), either mechanical or hydraulic versions. The...
May 29, 2025
Photo courtesy of OTC
product_images__20250519t120950
The 1,000V CAT III Hybrid Multimeter with Insulation Resistance Test from OTC allows technicians to perform insulation and high-voltage electrical tests on modern vehicles with...
May 19, 2025
Photo courtesy of OTC Tools
product_images__20250509t165029
The OTC Vehicle Positioning Jack, No. PJM15, is a single-car dolly that can lift and support up to 1,500 lbs to help safely move disabled vehicles. The ratcheting foot pedal quickly...
May 9, 2025
Photo courtesy of OTC Tools
product_images__20250509t162520
The OTC Strut Tamer Safety Cage, No. 6637-5, attaches to the Strut Tamer with stand (No. 6637-ST), or behind the Strut Tamer (No. 6637) when wall-mounted, adding an extra layer...
May 9, 2025
Photo courtesy of OTC
OTC Heavy Duty Snap Ring Pliers Set
The OTC Heavy Duty Snap Ring Pliers Set is designed to streamline in-shop service for the heavy duty vehicle technician. The heat-treated steel "circlip" pliers feature a...
April 17, 2025
product_images_53
The 2,000-lb Capacity High-Lift Transmission Jack, No. 5078, from OTC, is designed for trucks and buses. The jack features a foot-operated air pump that enables the operator to...
March 27, 2025

Press Releases

Ca6630
The new OTC CA7149 Starter and CA6630 Professional Ball Joint Connected Adapter Kits cover more vehicle models than competitive kits, with fewer adapters.
April 20, 2021
1797
OTC released a new special transmission jack adapter, the OTC 1797 heavy-duty clutch adapter.
April 5, 2021
OTC today released 10 new GM service tools, expanding its portfolio of OEM-level products to cover Buick, Cadillac, Chevrolet and GMC vehicles.
March 24, 2021
6669
The kit contains a 3-jaw puller, four lengths of rods, a forcing screw with a 3/8” internal square, a 3/4” external hex, as well as an extra set of jaws for additional applications...
Sept. 29, 2020
Powertrain Lift Differential Adapter Set, No. 5295-DA
Compatible with OTC’s Powertrain Lift Table, the adapter mounts easily to provide safe and proper handling of differential axle assemblies during servicing.
July 28, 2020
The four new engine plate adapters are designed to allow technicians to safely and securely remove and hold heavy duty engines.
June 2, 2020
2,500 lb Air/Hydraulic Powertrain Lift, No. 1595A
The scissor-designed powertrain lift can handle loads including engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries, and more.
Dec. 10, 2019
Fuel System Priming Pump, No. 5869
The fuel system tools are specifically designed for use on Detroit Diesel applications.
Dec. 9, 2019
Oil Priming Adapter, No. 6492-10
The company designed these tools for specific Detroit Diesel engine applications.
Dec. 2, 2019
The OTC Injector Remover, No. 5876.
The specialty tools are designed to service Detroit Diesel Series 60, two-cycle Series 53, 71, DDEC IV engines, and more.
Nov. 21, 2019

Videos

Maxresdefault 62f2cd4d1458d
In this video, OTC demonstrates its Angled Crimping and Straight Crimping Pliers, Nos. 5950A, 5950S, and 5950D.
Aug. 9, 2022
Maxresdefault 62ab66e893b77
The OTC Hub Grappler, No. 6575, is a complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle.
June 16, 2022
Maxresdefault 5d2650dfee570
In this video, shop owner and Master Technician Jeff Buckley reviews the OTC Extendable Indexing Pry Bar, No. 7177.
Aug. 6, 2019
Maxresdefault 5d4463c84d0dc
In this video, Bosch demonstrates how to diagnose and replace a mass air flow (MAF) sensor.
Aug. 2, 2019
Maxresdefault 5d4460b8112c0
In this video, Bosch demonstrates how to remove and install a high pressure pump.
Aug. 2, 2019
Maxresdefault 5d2c94caaad39
In this video, Jeff Buckley, master technician and shop owner, provides insight on the advantages offered through the OTC Extendable Pry Bar, No. 7177.
July 15, 2019
Maxresdefault 5bfeea9719afd
Using the OTC Encore's on-tool Repair-Trac feature to diagnose a cruise or speed control that is not working.
Nov. 28, 2018
Hqdefault 5bfee9b4e0541
This video offers a video demonstration of the OTC Tire Spoon Service Tools.
Nov. 28, 2018
Maxresdefault 5bfee8308f134
In this video, Bosch Technical Trainer Doc Watson goes over the features of the OTC Evolve.
Nov. 28, 2018
Maxresdefault 5b5a381222542
Bosch Technical Trainer, Doc Watson, takes you through the finer points of using a smoke machine with the OTC Encore to diagnose leaks in your system.
July 26, 2018

Blogs

Elliot Maras
Scan tools pose big challenges for today's aftermarket; manufacturers can be a good resource.
Nov. 27, 2013

Articles

Photo courtesy of OTC
Cone Washer Removal Adapter, No. 5098
Reviewed by Bryan Pollock, shop foreman for Wilco Auto Care in Niagara County, NY.
April 2, 2025
Most Wanted Tools September 2023
The EZ Fit Adjustable Tubing Straightener, EV Diagnostics Upgrade Kit, and Portasol-Patch are some of this month's most popular tools and equipment among auto repair techs.
Sept. 29, 2023
Most Wanted Tools May 2023
The Clamp Probe Set, High Flow Air Blow Gun, and Hub Seal Puller Set are some of this month's most popular tools and equipment among auto repair techs.
May 26, 2023
March Most Wanted Tools 2023
The Nitrous Key Making System, Bit Bar, and Torque Limiting Ratchet Wrench are some of the popular tools and equipment among auto repair techs.
March 9, 2023
CA7149 Connected Adapter Ball Joint Starter Kit
Q&A with Justin Fisette, senior product manager at Bosch Aftermarket and OTC Tools.
March 3, 2023
2023 February Sneak Peek
Some popular products from this month's sneak peek include the Pistol Grip Wire Inserter, HD Code Pro, M12 FUEL Bandfiles, and more.
Feb. 9, 2023
Most Wanted Tools
The Angled Wire Stripping Tool, Hub and Stud Cleaning Kit, and Extended Reach Nut Drivers are some of the popular items among auto repair techs.
Sept. 1, 2022
Most Wanted Tools April
The H15R Core Headlamp, Mechanic's Worklight, and Lumenators are some of the popular items among auto repair techs.
April 6, 2022
Ca7149 Angled
The kit is designed to assist technicians with ball joint removal and installation, universal joint removal and installation, and wheel stud removal and installation.
July 28, 2021
B. Hoyland
2011 Ford Fusion alignment specs. Note the difference between 2011 and 2016 vehicles, as these have a wider tolerance.
Solve customers’ alignment issues by performing the right checks, with the right tools.
May 18, 2020

Request More Information From OTC, Bosch Automotive Service Solutions

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.

Additional content from OTC, Bosch Automotive Service Solutions

OTC Tools
The OTC Power Train Lift, No. 1585A, is ideal for engine and transaxle service. The lift supports up to 1,250 lbs and features a compact design with swivel casters for easy...
March 20, 2025
Photo courtesy of OTC Tools
OTC
The 8-pc Battery Terminal Service Kit, No. 4631, from OTC includes essential tools such as a battery terminal puller, a 3-way battery post cleaner, battery pliers, and various...
March 14, 2025
Photo courtesy of OTC
otc_8pt
The OTC 6- and 8-pt Wheel Bearing Locknut Sockets and Board, No. 9852, features a range of 6- and 8-pt locknut sockets that are used to ensure proper torque setting on wheel bearings...
Feb. 14, 2025
Photo courtesy of OTC
otc_8pt
The OTC 8-pt Wheel Bearing Locknut Sockets with Tool Board, No. 9851, includes 15 8-pt sockets ranging in size from 2-3/8" up to 4-1/2" and three 6-lug tubular spanner wrenches...
Feb. 10, 2025
Photo courtesy of OTC
otc_6pt
The 6-pt Wheel Bearing Locknut Sockets with Tool Board, No. 9850, from OTC, include 21 sockets made of high-strength steel that resist rounding when removing or installing locknuts...
Feb. 6, 2025
aspire_images_14
The 3-Ton Steel Jack Stand from OTC Tools is built with a durable, formed, and welded high-quality steel base for long-lasting stability and safety, making them a reliable choice...
Feb. 3, 2025
Photo courtesy of OTC
a pair of pliers with black dipped handles and black pieces made to grip around a lug nut cap as jaws
The OTC Lug Nut Cap Remover, No. 5047, features specially coated jaws that resist slippage regardless of the force applied. The remover allows users to remove the chrome-plated...
Jan. 27, 2025
Photo courtesy of OTC
otc
The OTC Cone Washer Removal Adapter, No. 5098, is an air hammer attachment designed to break cone washers on floating axle dual rear wheel setups loose. The hollow-centered tool...
Jan. 27, 2025
ru__20240918t102309
The 10-Ton Air Hydraulic Service Jack, No. HDJ10P, from OTC Tools features air-assist operation to quickly and safely handle lifting tasks. With rugged steel frame members, and...
Sept. 18, 2024
Photo courtesy of OTC
wheel_sep
The OTC Dual/Single Wheel Separator, No. 5693, can quickly separate rusted, frozen, or seized outside dual wheels or single wheels from the wheel hub. It features an outer driver...
Aug. 15, 2024
Photos courtesy of H&S Autoshot, Bosch, Snap-on, Solder-It, Forney Industries
pten_body_shop
These are some of the featured products from the Body Shop category of this year's showcase.
July 22, 2024
Photo courtesy of OTC
untitled_design__20240701t102421
The Suspension Bushing Adapter Kit, No. 4254-FR, from OTC is designed for OTC service sets; 4247, 4275, 4261, or 4263 with 4106A 25-ton ram. Each kit features Hendrickson rear...
July 1, 2024
Photo courtesy of OTC
untitled_design__20240701t100032
The Suspension Bushing Kit with Pump, No. 4247-FR, from OTC includes an air/hydraulic pump, a 25-ton hydraulic cylinder, a hose with couplers, a complete puller leg/plates, and...
July 1, 2024
Photo courtesy of OTC
otc_air_assist_jacks
The OTC Air Assisted Bottle Jack is available in three versions: 12-ton (No. BT12P), 20-ton (No. BT20P), and 30-ton (No. BT30P). Each jack meets ASME PASE safety standards and...
May 30, 2024
Photo courtesy of OTC
otc_20_ton_ramp
The OTC 20-Ton Truck Loading Ramps are available with a 10" width (No. TR2010) or a 16" width (No. TR2016). Both ramps have a height of 9-1/4" and can service most mid- to large...
May 21, 2024
Photo courtesy of OTC
otc_20_ton_jack
The 20-Ton Air/Hydraulic Service Jack, No. HDJ20, from OTC is capable of lifting large vehicles such as school buses, garbage trucks, bucket trucks, and other commercial vehicles...
May 21, 2024
Photo courtesy of OTC Tools
untitled_design__20240510t132900
The Clutch Alignment Tool Set, No. 2420, from OTC Tools comes with a shaft and eight adapters to create 16 unique alignment aid sizes. The set works on most foreign and domestic...
May 10, 2024
Cesar Machado winner of the AIRCAT Prize Pack.
The annual contest from VehicleServicePros.com, the official website of Professional Tool & Equipment News, Motor Age, and Auto Body Repair Network magazines, gave away over $...
Dec. 13, 2023
Photo from OTC
3-Ton Service Jack
The 3-Ton Service Jack, No. LDJ3-A, from OTC has a low-profile, compact design for easy and convenient positioning underneath vehicles. The jack can be used on vehicles with minimal...
Dec. 11, 2023
Photo courtesy of OTC
20-Ton Jack Stand, No. S020
The OTC 20-Ton Jack Stand, No. S020, was made for lengthy support needs. Its design consists of a square steel tubing base and a support column, large saddle that when adjusted...
Aug. 24, 2023
Photo courtesy of OTC
OTC 12-Ton Jack Stands, No. S012
The OTC 12-Ton Jack Stands, No. S012, are constructed of a formed and welded, high-quality steel base for strength to provide safe vehicle holding. They feature a pin-style stand...
Aug. 24, 2023
OTC 30-Ton Bottle Jack, No. BT30
The 30-Ton Bottle Jack, No. BT30, from OTC offers a maximum height of 17-5/8". Compact and constructed with a forged base and cylinder, this jack is built to last. The chromed...
Aug. 18, 2023
OTC 12-Ton Bottle Jack, No. BT12
The OTC 12-Ton Bottle Jack, No. BT12, is compact, heavy duty, and is ideal for trucks. Constructed with a forged base and cylinder, this jack is built to last, ensuring strength...
Aug. 18, 2023
Photo courtesy of OTC
Angled Wire Stripping Tool, No. 5950D
The OTC Angled Wire Stripping Tool, No. 5950D, is a versatile handheld tool designed for stripping wires in tight spaces, up against bulkheads, and in other hard-to-reach areas...
May 2, 2023
OTC 2-Ton Low Profile Long Reach Service Jack, No. LDJ2
The OTC 2-Ton Low Profile Long Reach Service Jack, No. LDJ2, is ideal for general service and high-volume service shops looking to lift midsize cars, trucks, SUVs and compact ...
Feb. 22, 2023
OTC Large Hub Seal Puller Head, No. 600053
The OTC Large Hub Seal Puller Head, No. 600053, is designed to eliminate bearing and hub damage that can occur when a punch and hammer is used to remove the seal. The large, replaceable...
Jan. 23, 2023
OTC Cab Mount Bushing Kit, No. 5867
The OTC Cab Mount Bushing Kit, No. 5867, is designed to remove and/or install cab-mounting bushings on select Navistar bodies. The kit includes the OTC C-frame and proprietary...
Dec. 13, 2022
OTC EGR Valve Puller, No. 5865
The OTC EGR Valve Puller, No. 5865, is designed to remove the EGR valve on 2010 MaxxForce 10,9, and DT engines as well as 2013 N9 and N10 with SCR engines. The tool is similar...
Dec. 13, 2022
Hub Seal Puller Set, No. 5085-S
The OTC Hub Seal Puller Set, No. 5085-S, is designed to eliminate bearing and hub damage that can occur when a punch and hammer is used to remove the seal. An extra long 28" handle...
Oct. 20, 2022
Honda Control Arm Connected Adapter Set, No. CA6636-HCB
The OTC Honda Control Arm Connected Adapter Set, No. CA6636-HCB, is designed for simpler Honda and Acura control arm bushing removal and installation. The set contains the CA29503...
Sept. 26, 2022
Pitman Arm Puller, No. 5857
The OTC Pitman Arm Puller, No. 5857, allows for the removal of pitman arms from most Sheppard M-Series steering gears. Works in conjunction with the pitman arm retainer, which...
July 27, 2022
Piston Ring Compressor, No. 5852
The OTC Piston Ring Compressor, No. 5852, is designed to assure proper piston installation while reducing the possibility of broken rings. The ring compressor has a diameter of...
July 27, 2022
Front Seal Installer, No. 5863
The OTC Front Seal Installer, No. 5863, is designed to install the front seal and wear sleeve on select Navistar VT and MaxxForce engines. Includes a seal installer cup and pilot...
July 27, 2022
Injector Puller, No. 5861
The OTC Injector Puller, No. 5861, is used to remove the injector from the cylinder head on select Navistar MaxxForce, N10, N13, N9, and International A engines. Includes a puller...
July 27, 2022
Rear Seal and Wear Sleeve Installer, No. 5855
The OTC Rear Seal and Wear Sleeve Installer, No. 5855, are designed to install and correctly position both crankshaft rear oil seal and wear sleeve. The set covers 156mm and 166mm...
July 27, 2022
Cam Gear Puller
The OTC Cam Gear Puller, No. 5851, is used to remove the cam gear on select Navistar, MaxxForce, N9, N10, and DR engines. Vehicle applications include the Pre 2004 530E, Pre 2004...
June 6, 2022
Rear Seal Installer, No. 5853
The OTC Rear Seal Installer, No. 5853, is designed to install crankshaft rear oil seal and wear sleeve on select Navistar, MaxxForce, N9, N10, and DT engines. The kit includes...
June 6, 2022
Universal Cylinder Liner Puller, No. 5668
The OTC Universal Cylinder Liner Puller, No. 5668, is designed to be used with an impact wrench for quick cylinder liner removal. The spring loaded puller arms automatically adjust...
May 3, 2022
High-Lift Transmission Jack, TJH10
The OTC High-Lift Transmission Jack, TJH10, is ideal for the removal and installation of vehicle transmissions. The jack has a capacity of 1,000 lbs and features a universal saddle...
April 27, 2022
Otc 5950d
The OTC Angled Wire Stripping Tool, No. 5950D, is designed with the stripping dies on the angled tip, above the pivot point, to give users the right angle to neatly strip or cut...
Dec. 10, 2021
Otc 2495
The OTC Plastic Clip Popper, No. 2495, is able to pry, grab, lift, squeeze, pull, collar, and even cut. It can be used for nearly any style plastic fastener, clip, clamp, retainer...
Dec. 10, 2021
Otc Gauge Head And Boot
The OTC Digital Compression Gauge Head and Boot can replace analog gauges to provide advanced features, including measure, record and playback of compression readings on up to...
Nov. 8, 2021
Bosch 5606 Dg
The OTC Digital Compression Tester Kit, No. 5606-DG, is designed to help determine the mechanical condition of the engines' cylinders. The digital gauge is easy to read and can...
Nov. 8, 2021
Otc 5605 Dg
The OTC Deluxe Digital Compression Tester Kit, No. 5605-DG, is designed to help determine the mechanical condition of the engines' cylinders. The digital gauge is easy to read...
Oct. 28, 2021
Otc Hdj5 P
The OTC 5-Ton Air-Assist Service Jack, No. HDJ5P, features a long chassis and is ideal for lifting step vans, bucket trucks, and smaller vehicles. Its rugged steel frame members...
Oct. 28, 2021
Otc S06
The OTC S06 6-Ton Jack Stands are constructed of a formed and welded steel base for strength, and are ideal for holding step vans, vocational trucks, and smaller heavy duty vehicles...
Oct. 28, 2021
Otc Hdj5
The OTC 5-Ton Service Jack, No. HDJ5, features a durable long chassis and is ideal for lifting step vans, bucket trucks, and smaller work vehicles. A built-in safety overload ...
Oct. 28, 2021
6661
The OTC Ball Joint Remover, No. 6661, is designed to separate mainly the lower ball joint from the steering knuckle. Its universal design fits many applications including various...
July 8, 2021
6780
The OTC Fuel Pressure Test Adapter, No. 6780, is designed to adapt to the fuel system for use during pressure testing and diagnostic procedures. For use on 2003-later 5.9L Cummins...
July 8, 2021
6783
The OTC Fuel Tank Adapter, No. 6783, is a gas tank and gas cap adapter used to diagnose tanks with conventional threaded type fuel filler caps. It designed to be used with an ...
July 8, 2021
6358
The OTC Alternator Decoupler Pulley R/I, No. 6358, is designed to hold the alternator shaft in place, allowing the decoupler pulley to be removed and installed. Both male and ...
July 8, 2021
6359
The OTC Power Steering Pulley Puller, No. 6359, is designed for use on the power steering pump pulley to prevent damage during pump and pulley removal. It can also be used to ...
July 8, 2021
6640
The OTC Strut Nut Socket, No. 6640, is for use on shock absorbers that have the electrical terminals coming through the center of the tenion and the mounting nut deep into the...
July 8, 2021
6782
The OTC Fuel Tank Leak Check Adapter, No. 6782, is a gas tank and gas cap adapter for diagnosing tanks with 1/4 turn type fuel filler caps. It's designed to be used with an EVAP...
July 1, 2021
6670 (1)
The OTC Valve Spring Compressor, No. 6670, is designed to properly service valve train components during engine service when the cylinder head is on the engine block. Applications...
July 1, 2021
6356
The OTC Crank Sprocket Remover, No. 6356, is a specialized puller for removing the crankshaft sprocket. It includes three 6mm x 1 x 50mm bolts. The Crank Sprocket Remover is for...
July 1, 2021
6355
The OTC Crank Sprocket Installer, No. 6355, is designed to install the crankshaft sprocket. The hardened forcing screw may also be used to replace the original 12mm bolt. The ...
June 29, 2021
6354 (1)
The OTC Return Spring Compressor, No. 6354, is designed to compress the 2-4 piston return spring during removal or installation of the retaining ring in automatic transaxles.
June 28, 2021
Otc Adapter Ball Joint Kit Ca6630
The OTC CA6630 Ball Joint Connected Adapter Professional Kit includes 25 connected adapters, covering more than 600 vehicle models, and an illustrated manual and application guide...
May 10, 2021
CA7149 Connected Adapter Ball Joint Starter Kit
The OTC CA7149 Connected Adapter Ball Joint Starter Kit includes seven connected cups and adapters for use on more than 235 vehicle models as well as a 17-page application manual...
April 28, 2021
6497 2283 0 0
The OTC Pitman Arm Puller Set, No. 6701, is designed to allow technicians to quickly and efficiently remove the Pitman arm from the steering gear without the need to remove major...
April 6, 2021
7297
The OTC Oil Pressure and Prelube Adapter, No. 7297, installs in place of the spin-on oil filter to allow existing oil pressure gauges to attach and test oil system pressure. It...
April 5, 2021
6787
The OTC EVAP Access Port Tool, No. 6787, is designed to connect into the EVAP system line at the canister quick-connect fitting, allowing for EVAP system testing and diagnosis...
April 5, 2021
6777
The OTC GM Duramax Injector Puller, No. 6777, is designed to assist in removing injectors from the cylinder head without damaging the injector body. For use on 2011 and later ...
April 5, 2021
6757
The OTC Injector Seal Installer and Sizer Adapters, No. 6757, installs the Teflon seal onto the end of the injector. The pilot cone is placed onto the end of the injector and ...
April 5, 2021
6756
The OTC Injector Seal Installer and Sizer Adapters, No. 6756, are designed to ensure replacement injectors and seals are installed correctly.
April 5, 2021
6750
The OTC Diesel Fuel Hydrometer, No. 6750, is designed to test #1 and #2 grade diesel fuel composition and combustion characteristics, helping diagnose fuel and drivability issues...
April 5, 2021
6741
The OTC Crankshaft Rear Seal Installer, No. 6741, is a two-piece tool that mounts to the crankshaft, placing force on both inner and outer seal bodies and is designed to press...
April 2, 2021
6740
The OTC Crankshaft Rear Seal Remover, No. 6740, is a three-jaw puller designed to grab the inner lip of the seal. The forcing screw attached to the center plate is used to react...
April 2, 2021
6739
The OTC Quick Connect Release Tool, No. 6739, is designed to separate the 4.8mm (3/16") hydrocarbon injection quick-connector, allowing access to service of the fuel line bundle...
April 2, 2021
6725
The OTC Belt Tensioner Compressor, No. 6725, is designed to compress the belt tensioner spring during engine drive belt replacement and starter generator servicing for easier ...
April 2, 2021
1797
The OTC Heavy Duty Clutch Adapter, No. 1797, is designed to help technicians easily handle heavy duty clutch assemblies during service. The adapter has universal mounting slots...
March 30, 2021
Ua22 0
The OTC 22 Ton Under Axle Jack, No. UA22, features a self-retracting, spring return with long 49-1/2" T-handle to let users easily position the jack under vehicles with long overhangs...
Feb. 25, 2021
2
The OTC Brake Line Bending Pliers, No. 6719BP, offer technicians an easy way to bend brake lines on vehicles in tight and hard-to-reach areas. Thanks to its design, the pliers...
Oct. 8, 2020
Uh20
The OTC Supplementary Stand, No. UH20, is designed to stabilize vehicles and prevent tipping while they are lifted on hoists. The 3" saddle, secured in a support column, is mounted...
Sept. 28, 2020
Uh15fp
The OTC 1,500 lb Capacity Auxiliary Stand with Foot Pedal, No. UH15FP, offers partial support for positioning Class 1 through Class 8 powertrain components and drivetrains during...
Sept. 28, 2020
Uh15
The OTC 1,500 lb Capacity Auxiliary Stand, No. UH15, is designed to provide partial support for positioning of vehicle components during their installation and removal, from Class...
Sept. 28, 2020
6669
The OTC Harmonic Balancer Puller Kit, No. 6669, is designed for removing the harmonic balancer in tight engine compartments without removing the radiator. The kit contains a three...
Sept. 21, 2020
5295 Da
The OTC Powertrain Lift Differential Adapter Set, No. 5295-DA, is designed to facilitate the removal and installation of common differentials currently in use. Compatible with...
July 29, 2020
1750-4940 Engine Adapter Plate
The OTC Engine Adapter Plates allow technicians to safely and securely remove and hold heavy duty engines using the 1750A Revolver Diesel Engine Stand from OTC. The adapter plates...
June 1, 2020
Ldj35
The OTC 3.5 Ton Service Jack, No. LDJ35, is durable and ideal for both large automotive service centers and one-person shops. The LDJ35 is the optimal size for full-size pickups...
May 13, 2020
Hdj10p
The OTC 10 Ton Air/Hydraulic Service Jack, No. HDJ10P, is designed to bring the versatility of air-assist operation to high-demand shops. Featuring a sturdy welded hydraulic pump...
May 13, 2020
5105b Dual Wheel Hi Lift Dolly Solo
The OTC 1,100 lb Capacity High-Lift Dual Wheel Dolly, No. 5105B, is designed to be an effortless air-powered hydraulic lift system for a variety of applications. It has a lifting...
Feb. 26, 2020
Photo courtesy of Lang Tools
Pry bars, such as this one from Lang Tools, offer a wide variety of uses for many repair jobs.
Multifunctional tools offer technicians a variety of benefits, from saving money to improving safety, and everything in between.
Feb. 6, 2020
Wiha Tools Insulated 80 Piece Set In Rolling Tool Case, No. 32800.
To remain safe when servicing electric vehicles, it is important to use properly rated tools and personal protective equipment.
Feb. 6, 2020
3991 12
The OTC Hybrid Electric Safety Gloves, No. 3991-12, are designed for technicians working on high voltage vehicles. The gloves are available in small, medium, and large with leather...
Feb. 3, 2020
B. Hoyland
The use of a dial indicator to check run-out can prevent come-backs.
Tips and tools to avoid come-backs after brake maintenance and service.
Dec. 17, 2019
5872 Compression Gauge
The OTC Compression Gauge, No. 5872, is designed to measure compression accurately and easily within Detroit Diesel Series 60 and two-cycle Series 53, Series 71, Series 92, and...
Dec. 16, 2019
5874 Cylinder Liner Installer
The OTC Cylinder Liner Installer, No. 5874, is designed to install cylinder liners into the engine block. The 5874 attaches to Detroit Diesel Series 60 engines with three-cylinder...
Dec. 16, 2019
5875 Cylinder Liner Remover
The OTC Cylinder Liner Remover, No. 5875, expands in the cylinder to pull liners with an inner diameter of 5" to 5.75". The 5875 uses thrust bearings on the expander along with...
Dec. 16, 2019
5879 Poppet Disassembly Tool
The OTC Poppet Disassembly Tool, No. 5879, aids in the disassembly of poppet valves with two-prong spanner style ends. The 5879 is designed for use on all Detroit Diesel engines...
Dec. 16, 2019
4853 Piston Ring Compressor
The OTC Piston Ring Compressor, No. 4853, assists technicians to compress piston rings during piston installation. The 4853 is equipped with an adjustable handle that provides...
Dec. 16, 2019
6492 10 Oil Priming Adapter
The OTC Oil Priming Adapter, No. 6492-10, allows for proper engine pre-lube to prevent dry starts following engine service. The adapter is designed for use with the OTC Engine...
Dec. 16, 2019
5868 Fuel System Test Gauge
The OTC Fuel System Test Gauge, No. 5868, is used to properly diagnose and repair fuel systems. The 5868 connects directly to the priming port fitting on the engine fuel module...
Dec. 10, 2019
5869 1 Fuel System Coupler Fitting
The OTC Fuel System Coupler Fitting, No. 5869-1, assists with fuel system priming by connecting to the fuel system through a “compu-check” quick connect fitting. The 5869-1 is...
Dec. 10, 2019
5869 Fuel System Priming Pump
The OTC Fuel System Priming Pump, No. 5869, allows technicians to pressurize a fuel system after service to ensure proper operation and efficient starting on all Detroit Diesel...
Dec. 10, 2019
1595 A
The OTC 2,500 lb. Air/Hydraulic Powertrain Lift, No. 1595A, features a scissor-type design to lift and handle heavy loads for technicians, reducing stress and heavy lifting on...
Dec. 10, 2019
5877
The OTC Injector Cup Removal/Installation Tool, No. 5877, is a two-tool set that provides technicians with removal and installation of screw-in stainless steel injector cups. ...
Nov. 26, 2019
5886
The OTC Fuel Injector Torque Adapter, No. 5886, is used to remove and install injector feed tubes on Detroit Diesel DD13 and DD15 engines. The unique design of the 5886 provides...
Nov. 26, 2019