TSB: Nissan G-Sensor Calibration

This bulletin applies to 2019-2023 Nissan Altima, 2021-2023 Kicks and 2020-2023 Versa vehicles. DTC C111F (G-sensor) may be stored as current in the ABS actuator and electric control unit. Do not automatically replace the ABS control unit unless instructed to do so.

Calibrate the Decel G-Sensor, while the vehicle is on a level surface such as an alignment rack. If the DTC C111F status changes to “Past”, erase the DTC. The service is now complete. If status did not change to “Past,” refer to the service manual for further diagnostics.