This bulletin applies to 2012-2013 Mazda3 with Skyactiv 2.0L, 2013-2014 CX-5 built before Dec. 1, 2013, 2014 Mazda3 built before Dec. 1, 2013 and 2014 Mazda 6 built before Dec. 1, 2013.
This bulletin applies to 2012-2013 Mazda3 with Skyactiv 2.0L, 2013-2014 CX-5 built before Dec. 1, 2013, 2014 Mazda3 built before Dec. 1, 2013 and 2014 Mazda 6 built before Dec. 1, 2013.
Some vehicles may experience the check engine light on with DTC P0191:00 (fuel pressure sensor circuit range/performance problem...except 2014 Mazda3) or P0088:00 (fuel pressure sensor circuit range/performance problem ....2014 mazda3) stored in memory.
This is caused by the high pressure fuel pump not generating the target fuel pressure due to a manufacturing error of the inner parts.
Verify the concern.
Replace the high pressure fuel pump with a modified one according to the workshop manual.
Replace the pump, fuel pipe and rubber seal. Part numbers are as follows.
P/N ITEM
PE18-20-3F0.......... fuel pump (all models)
PE01-13-290D........ fuel pipe (2.0L)
PY01-13-290A.........fuel pipe (2.5L)
PE01-13-555........... rubber seal (all models)
About the Author
Information courtesy of Mitchell 1
Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.
Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety ofspecialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.
