When Equinox Pops

July 12, 2022

Some Chevy Equinox vehicles may exhibit an intermittent pop or multiple popping noises from the rear of the vehicle shortly after a cold start or EVAP purge event.

This bulletin applies to 2010-2017 Chevy Equinox vehicles. The vehicle may exhibit an intermittent pop or multiple popping noises from the rear of the vehicle shortly after a cold start or EVAP purge event.

This condition may be caused by the auxiliary fuel pump in the left side of the fuel tank changing height (spring loaded leg). Note: This only applies to the auxiliary fuel pump module assembly. Replacing the primary fuel pump module would not correct the noise condition.

The technician should be able to duplicate the concern by commanding a purge and seal on the EVAP system using GDS2. As vacuum increases 3-5 inches Hg, the pop noise should be duplicated. To correct the concern, replace the auxiliary fuel pump module.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of  specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!