Owners of 2010-2014 Chevy Camaro vehicles may comment about an intermittent pop or multiple popping noises from the rear of the vehicle shortly after a cold start or EVAP purge event.
Owners of 2010-2014 Chevy Camaro vehicles may comment about an intermittent pop or multiple popping noises from the rear of the vehicle shortly after a cold start or EVAP purge event.
The technician should be able to duplicate the concern by commanding a purge and seal on the EVAP system using GDS2. As the vacuum reaches 3 to 5 inches, the popping noise should be duplicated.
The cause of the concern is the auxiliary fuel module in the left side of the fuel tank changing height (spring loaded leg) as the fuel tank slightly collapses.
Replace the auxiliary fuel module with a newly designed part if you experience this concern. The new part is available as fuel sender kit P/N 13592089.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
