• Fixing Nissan No Start Issue

    This bulletin applies to all 2013-2015 Nissan NV200 vehicles, and 2016 NV200 vehicles built before Feb. 19, 2016. When the ambient temperature is below freezing, the engine is started and the vehicle is driven only a short distance, and then the engine is shut off or allowed to sit for at least 10 minutes, the customer may experience a crank but no start issue or the engine may start but the engine will not respond to throttle pedal input

    This bulletin applies to all 2013-2015 Nissan NV200 vehicles, and 2016 NV200 vehicles built before Feb. 19, 2016. When the ambient temperature is below freezing, the engine is started and the vehicle is driven only a short distance, and then the engine is shut off or allowed to sit for at least 10 minutes, the customer may experience a crank but no start issue or the engine may start but the engine will not respond to throttle pedal input. One or both of the following DTCs may be stored in the ECM:

    - P2100 (ETC MOT PWR-B1)

    - P2101 ETC FNCTN/CIRC-B1)

    Replace the Intelligent Power Distribution Module (IPDM) with P/N 284B7-4AJ0A.

    About the Author

    Information courtesy of Mitchell 1

    Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

    Sign up for Vehicle Service Pros eNewsletters

    Voice Your Opinion!

    To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!