• Jeep Flash

    This bulletin applies to 2018-2019 Jeep Grand Cherokee vehicles built on or before Feb. 1, 2019, and equipped with a 6.2L supercharged HEMI V8 SRT or 6.4L V8 SRT HEMI engine and Quadra-Trac Active On Demand 4WD, that may require reprogramming the drivetrain control module (DTCM) with the latest software. The customer may experience a shudder on turns during acceleration, and/or a hot clutch-type odor.
    May 12, 2020
    65b84e2323e388001e8256ab Jeepflash

    This bulletin applies to 2018-2019 Jeep Grand Cherokee vehicles built on or before Feb. 1, 2019, and equipped with a 6.2L supercharged HEMI V8 SRT or 6.4L V8 SRT HEMI engine and Quadra-Trac Active On Demand 4WD, that may require reprogramming the drivetrain control module (DTCM) with the latest software. The customer may experience a shudder on turns during acceleration, and/or a hot clutch-type odor.

    After using a scan tool to verify that all related systems are functioning as designed, install a battery charger to maintain battery voltage between 13.2 and 13.5 volts. Reprogram the DTCM using the latest available software.

    Clear all DTCs that may have set during reprogramming.

    Sign up for Vehicle Service Pros eNewsletters

    Related

    Cleaning and maintaining your tool truck
    Stopping Lincoln Aviator brake bounce
    A Guide to the Perfect ADAS Calibration Setup
    Sponsored
    Easily Educate Your Customers and Insurance Adjusters on the Latest in ADAS System Technology
    Sponsored

    Voice Your Opinion!

    To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!