July 2023

The Smoke Pro Air from Redline Detection comes with its own onboard micro air compressor, eliminating the need to connect to air lines or inert gas. By eliminating the need for...

The Opus IVS CarDAQ-Pro is an all-in-one Pass-Thru device for multiple vehicle brands. Users can either use their own OEM subscriptions to employ CarDAQ-Pro as a J2534 Pass-Thru...

The FLIR E8 Pro Edition from Teledyne FLIR offers a large 3.5" touchscreen with FLIR Ignite Cloud connectivity within the same pistol-grip form factor as legacy E8 series thermal...

The Oasis Scientific Vividia CX-6010M Flexible Smartphone Joystick Articulating Inspection Camera Borescope features a 6mm diameter and 1m long flexible probe, which is covered...

The SureWerx MEGAComfort Safety and Occupational Insoles are ergonomically designed by a doctor, using a patented combination of high-density dual layer memory foam. These insoles...

The Mayhew Tools Socket Bit Line Expansion includes the addition of new medium and long-length socket bits, sold individually and as sets. The extended length of the medium and...

The Polyvance Plastic Welding Rod Assortment with Organizer Case (Tier 3), No. 5003-05, includes less-often-used, but important-to-have plastic welding rods. The organizer case...

The Innovative Products of America Electric Brake Force Meter with Dynamic Load Simulation and Circuit Testing, No. 9107B, is an all-in-one tester that can verify if a vehicle...

The NEBO 2-pk MYCRO 250 Rechargeable Headlamp offers convenience and adaptability in a compact design. The headlamp effortlessly converts into a cap light, emits three light modes...

The VIM Tools 6-pc 3/8" Drive Ratcheting Flare Nut Wrench Set, No. RFW100, includes a 10mm, 12mm, 13mm, 14mm, 17mm, and 19mm flare nut wrench head. Due to their shape and spring...

The AFF 2 Ton Lightning Lift Super Duty Long Chassis Floor Jack, No. 202LCJ, features single piston, one-pump-to-load technology. The jack has a minimum height of 2.9” and a maximum...

The Cal-Van Tools Light Bulb Pliers, No. 47, are designed to fit most mini and small automotive bulbs. Due to the bulbs' fragile nature, the pliers are outfitted with rubber-coated...

The Lang Tools 26" Internal Retaining Ring Pliers with Interchangeable Tip, No. 1489, are heavy duty pliers used to remove and install the large internal retaining ring in transmission...

The Performance Tool Radiator Pressure Test Kit, No. W89746, is designed to test pressurized cooling systems up to 30 psi on vehicles to help detect internal and external leaks...

The Cojali Jaltest Software 23.1 Update offers new coverage and improvements across multi-brand diagnostics for commercial vehicles, agricultural equipment, OHW equipment, material...

The Master Proheat A-Series Heat Guns set a new standard for reliability and ease of field repairability. Engineered by the heat tool experts at Master’s headquarters in Racine...

The patented and proprietary asTech Rules Engine uses tens of thousands of scans to compare the effectiveness of aftermarket vs OEM scan tools. It can identify when an aftermarket...

Maneuver with greater mobility, powered by a series of new Ingersoll Rand cordless tools ready for the most demanding industrial and automotive environments. Engineered to conquer...

Mirka’s versatile ANGOS ARG-B-200 is ideal for grinding and sanding metal, cleaning after welding, surface conditioning, cutting and deburring, and paint removal. Fit it with ...

Mirka Spot Repair Sanders are small, ergonomic, and ideal for professionals who appreciate high-quality and low maintenance. These sanders are ideal for denibbing and fine finishing...

The WeatherTech ComfortMat Connect is ideal for those who work on their feet all day. This extendable, interlocking mat provides anti-fatigue cushion and support that lasts all...

The Car Certified Tools Master Brake Adapter Kit is designed to match a specific manufacturer for easy installation and a leak-proof seal every time. Each adapter has 360-degree...

The Electric Brake Bleeder from Car Certified Tools is available with a 2.5 or a 4.0 gallon tank. It features an automatic low fluid level shut off to prevent air bubbles, it ...

The Dynabrade Renny Doyle Series DB8 Geared Dual Action Polisher is the new premier polisher for the detailing market. It's a collaboration of Dynabrade and Renny Doyle, a master...

Liqui Moly's A/C System Cleaner is designed to improve the efficiency and lifespan of HVAC systems as well as to create a healthier environment inside the vehicle. The A/C System...

The AME International Air Power Buddy (APB) Premium 1" Air Impact Wrench, No. 79730, has a 1" drive, a 6" extended anvil, and a free speed of 5,000 rpm. The maximum reverse torque...

The MV7135 Vacuum Brake Bleeder from Mityvac is a compressed air-powered system designed for performing one-person vacuum brake and clutch bleeding. The tool utilizes compressed...

The GEDORE Micro Borescope, No. KL-0880-10, is designed to enable quick inspection of difficult-to-access components. It is intended for use on professional damage analysis on...

The Updated DB-70 Automatic Wheel Balancer from Dannmar offers digital sensor technology for reliable, consistent performance as well as seven balancing modes and the ability ...

The Solder-It Butane Blow Torch Kit with 2 Nozzles, No. PT-620CR, has an adjustable airflow that produces a soft and solid flame. The torch features a base designed for handsfree...

The Lisle Radiator Genie Water and Air Cleaning Wands, Nos. 88500 and 88600, are designed for high efficiency cooling systems, all types of radiators, and other hard-to-reach ...

The CJ4R Scan Tool from Injectronic is used by technicians for its roughness, ease of use, affordable updates, and lab scope combination, now innovated and enhanced with remote...

Snap-on has redesigned and upgraded its SOLUS platform. The tool includes SureTrack verified repair information and comprehensive coverage for 49 domestic, Asian, and European...

Professionals trust their tools. This trust is vital when performing electrical repairs such as handling electrical installations or working on EV cars. KNIPEX offers over 200...

The Titan Professional Tools 19-pc 3/8" Drive 6-Point Metric VDE Insulated Socket Set, No. 68100, features a fully insulated 3/8" drive reversible ratchet with quick release. ...

Experience mobility and efficiency with the Launch Tech ADAS Mobile Plus. It's the lightest, most portable ADAS solution anywhere. Key features of the product include a lighter...

The Matco Tools MWLJUMP is not only a portable jump starter but also has integrated 7W COB rechargeable work and UV lights. It can easily jump-start cars up to 12V with 3L gasoline...

The Grey Pneumatic 1/4" Extended Length Impact 4" Hex Drivers, No. 9247H, are designed for getting to the smallest fasteners located in hard-to-reach places. These drivers are...

The OEMTOOLS 2-pc Hose Clamp Pliers, No. 25198, are designed to remove flat-typed hose clamps in hard-to-reach areas. This plier set includes flat band hose clamp pliers and angled...

The Red Kap Short Sleeve Two Tone Pro+ Work Shirt with OilBlok and MIMIX features a back mesh flex panel and underarm gussets to enhance appearance and improve mobility and breathabilit...

The Atlantic Safety Products Outrageous Orange Powder-Free Orange Nitrile Disposable Gloves are designed to offer barrier protection. The gloves provide 8 mils of thickness, a...

The COExhaust Sliding Suction Rails are designed to easily provide the required ventilation to the spot where it is needed. The rails can be equipped with reels or simply a hanging...

MAGIC Hand Cleaner is a heavy duty, solvent free, natural-based cleaner designed to clean and protect industrial hands. A thick, concentrated formula fortified with natural walnut...

The Big Ass Fans Powerfoil X4 is engineered to improve indoor air quality and occupant comfort. Purpose built to provide maximum airflow in even the toughest conditions, the Powerfoil...

The Ranger TruSensor TS58R Universal TPMS Kit is designed to diagnose and program import and domestic tire pressure monitoring systems. Offering 98 percent global vehicle coverage...

TEXA provides a diagnostic platform capable of scanning passenger cars, heavy duty vehicles, motorcycles, ATVs/UTVs, boats, agricultural, and construction vehicles by operating...

ARES Professional 120-Tooth Ratchets need just 3-degrees of sweep for ratcheting action, making them ideal for close quarters work in tight spots. Made of chrome vanadium steel...

Shadow Tool Staging Systems patented technology provide space saving footprints when closed and then transform into a large tool wall, presenting tools in dedicated barrier-free...

The OTC Angled Wire Stripping Tool, No. 5950D, is a versatile handheld tool designed for stripping wires in tight spaces, up against bulkheads, and in other hard-to-reach areas...

The U.S. GENERAL Series 3 72" Roll Cabinet from Harbor Freight features a 6,600 lb weight capacity and comes in eight colors, each with black trim. It has 14 drawers, including...

The ATD Tools 1/2-Ton Hydraulic Telescope Transmission Jack, No. 7429, features an extra wide base for stability. It has a capacity of 1,000 lbs and rises to a maximum height ...

The Single and Two-Stage Duplex Air Compressors from Jenny Products are each equipped with two pumps and two electric motors, which can be operated separately or at the same time...

The CTA Tools ISX Rear Camshaft Seal and Sleeve Remover and Installer Set, No. 3895, is designed to easily install and remove crankshaft rear main seals and wear sleeves on a ...

The Dynamic Tools 28-pc Insulated Tool Set, No. D113000, includes a 1/2" drive ratchet with a selection of extensions and six-point metric sockets. It also contains open-ended...

The 90-Tooth 12-Point GearBox Double Flex Ratcheting Wrenches from GEARWRENCH deliver a 4-degree swing arch for improved access. With a longer, wider beam, the wrenches...

The MT03A Milliohm and Motor Tester Kit from Pico Technology is designed for fast and accurate earth-bond testing in compliance with UN ECE R100 regulations, meeting the needs...

The S.U.R.&R. Coolant Line Connector Repair Kit, No. CLC50, is designed to make coolant line repairs simple by providing a convenient assortment of most commonly-used heater hose...

The NextLED Rechargeable Neck Work Light, No. NT-6633, is a rugged and versatile handsfree worklight. Its flexible gooseneck design and magnetic base allow for easy positioning...

The RapidFix Extreme Bond Molding Tape is an acrylic dual-sided tape system. The durable tape bonds to most surfaces and can withstand extreme temperature fluctuations and weathering...

The Tuxedo Distributors iDEAL FP14KAC-X 14,000 lbs Four-Post Commercial Alignment Lift is designed for cars, SUVs, and trucks. Safety features include both narrow and wide runway...

The ATD Tools Exhaust Pipe Cutter Pliers, No. ATD-5721, are designed for both on- and off-car cutting. They are ideal for heavier walled exhaust pipes and have large diameter ...

The Exair 1/2 NPT HollowStream Cone Liquid Atomizing Spray Nozzle provides a hollow cone spray pattern for pressurized liquids and is ideal for cooling, cleaning, rinsing, and...

The Cornwell Quality Tools TEMPEST Drill Bits are designed to easily drill complete holes or enlarge existing holes through hardened steel, stainless steel, aluminum, and grade...

The Matco Tools 8-pc Long Reach Pliers Set - Blue, No. LRP8SETB, is designed to enhance the ability to reach the job at hand and access cramped, confined areas with an extended...

The H&S Autoshot SPR-Pro Self-Piercing Riveter System, No. UNI-6800, provides superior performance cold joining technology and features exact adjustable force settings...

The MotorVac Technologies CoolSmoke Multi-Pressure Diagnostic System is designed to assist with all types of automotive repairs, including wind/water, vacuum, exhaust, and EVAP...

The Cornwell Quality Tools ARCA Tool Storage lineup consists of a 57” 8-Drawer Double Bank Roller Cabinet and a 79” 13-Drawer Triple Bank Roller Cabinet, along with canopies and...

The Snap-on Stubby Ratchet Line-up now offers a quick-release mechanism to its 1/4" and 3/8" drive Dual 90 Technology stubby handle ratchets. With the quick-release mechanism,...

The Rotary R3AC Series A/C Recharging Machines are designed to automatically service the refrigerant in vehicle air conditioning systems. The product line provides professionals...

The TOPDON TopScan is a pocket-sized tool designed to turn any smartphone into a professional-grade scanner. TopScan is capable of reading and clearing fault codes for over 60...

The Thinkcar Platinum S12 includes features such as dynamic ADAS calibration, multimeter, oscilloscope, TPMS communication, 12" touchscreen, and guided diagnostic processes for...

The NextLED Professional LED Color Matching Light, No. NT-2040B-3, is ideal for color matching and spotting body flaws. With a CRI rating of 96+, it closely mimics natural sunlight...

The Lisle Corporation Electrical Disconnect Pliers, No. 37960, are designed to easily remove locking push tab style electrical connectors found on mass air flow sensors, fuel ...

The Oni Tools Fuel System Priming Pump, No. ONI581T, can prime the fuel system on various engine models, including the Detroit Diesel Series 60, MBE 900, MBE 4000, DD13, and DD15...

The CTA Tools Strut Lifter, No. 8200, is used for the removal and installation of struts, drive shaft, control arms, and ball joint hub separation. It mounts onto a hydraulic ...

Noregon's latest JPRO Professional 2023 v1 Update includes a significant increase in coverage for off-highway construction vehicles and equipment. Users will also receive coverage...

The ARI-Hetra Heavy-Duty Platform Lifts (HDPL) do not use any sliding parts thanks to their unique geometric configuration. Not only does this avoid wear on wheels or slide blocks...

The AGS EZ Fit Adjustable Tubing Straightener is designed to straighten tubing including NiCopp, copper, aluminum, stainless steel, and plastics up to 3/8” in diameter. It can...

The Matco Tools 16V Cordless Infinium 3/8" Sealed Head Ratchet Kits feature a fully sealed ratchet head to protect inner components from dust and debris, increasing tool durability...

The Proflex+ Pro MX-700T Smoke Monster Leak Locator is a two-in-one machine for EVAP and turbo, or for needing higher air pressure. The MX-700T offers a LCD screen and LED flow...

The AutoMeter Fully Automatic Heavy Duty Smart Charger, No. BPC-100, features a switching power supply design that allows for high-efficiency charging of a single battery, or ...

The PRO-LOGIX 12V 40/15/5/225A Wheel Charger with PS Mode and Engine Start, No. PL3740, from Clore Automotive is designed to deliver versatile service to today’s busy shops, from...

The ATEQ TPMS Tools VT67 TPMS and Tire Management Diagnostic Tablet is Android-based and has a large screen, expansive memory, and a built-in camera, making it easy for users ...

The Thraxus Elite Safety Eyewear from Radians are available with or without IQuity, Radians’ intelligent anti-scratch, anti-fog technology. The Elite eyewear are engineered with...

The Martins Industries Impulse 1/2" LW Impact Wrench, No. MX-LW1, is designed with a lightweight composite body, weighing only 5.2 lbs and produces 944 ft-lbs of torque with a...

The Mac Tools Advanced Code Reader, No. ET1400, features a 3-1/2" LCD screen, allowing users to analyze real-time graph data in the palm of their hand. It offers access to 10 ...

The Carlyle Tools ACM Series is designed to efficiently recover, recycle, and recharge automotive A/C systems. The A/C machines are compatible with both electric and traditional...

The MIG Welding Gloves from Mac Tools feature double-stitched seam for additional strength and a reinforced palm pattern. Made with premium leather, the gloves provide increased...

The Coxreels Extreme Duty XTM Dual Hydraulic Reel, No. XTM-DMP-450, is ideal for any application where dual hydraulic lines are required such as remote hydraulic equipment or ...

The OTC 2-Ton Low Profile Long Reach Service Jack, No. LDJ2, is ideal for general service and high-volume service shops looking to lift midsize cars, trucks, SUVs and compact ...

The Bit Buddy from Ernst Manufacturing measures 8" in length and fits up to 30 bits. With rare-earth magnetics, the Bit Buddy holds strong whether on the side of a toolbox or ...

The ARES 8-pc 3/8" Drive Low Profile Fuel and Oil Filter Socket Set, No. 14001, includes sockets in 24mm, 27mm, 28mm, 29mm, 30mm, 32mm, 36mm, and 38mm sizes, providing users with...

The Portasol-Patch from Portasol is an instant, multi-purpose repair patch available in two sizes: 3” by 6” and 6” by 9”. It's easy to use, is self-adhesive, and is a long-lasting...

The Mueller-Kueps Mini Pry Bar Set, No. 276 100, is a universal use set ideal for any application that requires lifting or prying. The pry bars have a black oxide finish to help...

The NextLED Ultimate Series NT-6926M Cordless Tripod Work Light is designed to provide high performance and quality. The LED can illuminate up to 6,000 lm in brightness with high...

The Ledlenser P7R SE (Special Edition) Flashlight takes the company's P7R Flashlight and gives it more illumination power (1,100 lm), a further beam distance ( 200m), and a longer...

The Rotary Lift LT33A Air-Hydraulic Lift Table is designed to service batteries on hybrid and electric vehicles. The LT33A single section scissor lift design has a wide, stable...

The Marson BT-8 Battery-Powered Rivet Nut Installation Tool from Howmet Fastening Systems is designed to deliver reliable pull-force for high-volume assembly applications. Engineered...

The Oni Tools Sheppard M110 Gear Box Pitman Arm Puller, No. ONI349T, is designed to easily remove pitman arms on Sheppard M110 steering boxes with its high-strength steel casting...