The SP Air Short Reciprocating Air Saw, No. SP-7620, is lightweight and features a small body style for greater access to tight work places. It is able to cut steel, sheet metal...
The AIRCAT Pneumatic Tools VIBROTHERM DRIVE 1” Impact Wrench, No. 1993-VXL, is designed to deliver high torque, low vibration, low noise, low weight, shorter length, and longer...
The AIRCAT 809 Series Sealed Flat Head Ratchets are available in 3/8” and 1/2” drive. The 809 Series delivers 60 ft-lbs of maximum torque with 350 rpm, providing a fast rundown...
Internal tire balancing rolls freely within the tire and repositions itself as the wheel assembly turns, neutralizing any imbalance and eliminating vibration through centrifugal...
The Cal-Van Ford EcoBoost Long Reach Balancer Installer, No. 38710, is designed to install harmonic balancers of Ford EcoBoost and various other Ford/Lincoln engines from 2011...
The Maxxeon WorkStar DROID Rechargeable Technician's Headlamp, No. MSN00500, features two brightness levels: 400 lm and 150 lm. The light head pivots up and down to direct light...
The Wurth Limited Edition 31-pc ZEBRA Drill/Screwdriver Set, No. 0624932020, includes high-performance drill bits with unique SMART STEP-technology, a magnetic 1/4" bit holder...
The OEMTOOLS 6-pc 3 Post Socket Tray Set, No. 22337, is designed to optimize time under the hood by eliminating time spent looking for the right tool. The tray sets each feature...
The WeatherTech FlexTray is designed to simplify cleanup and organize any project. The multi-use tray features a raised outer lip to catch and contain spills and splashes or to...
The John Bean EZ-ADAS Recalibration System includes an intuitive, laser-guided target placement that ensures accurate, error-free positioning, as well as a mobile app that allows...
The Mayhew Tools 10-pc Phillips Titanium Coated, Low Profile, Dual Drive Set, No. 16002, features an enhanced titanium coating for added strength and wear resistance. Its low-...
The BOLT ON TECHNOLOGY Text To Pay allows vehicle owners to pay no matter where they are. With Text To Pay, shops can enhance their customers' experience by allowing them to pay...
The DeWalt DPG76 Tread Grip Work Glove from Radians enables users to pick up small parts and keep hold of tools easily. It is designed with a breathable 13-gauge polyester/spandex...
The Ascot Supply Torque Fin is designed to link with, stabilize, and properly align manual torque wrenches to ensure accurate torque. The tool is durable, lightweight, and user...
The AFF Viking 22-Ton Air Assist Truck Axle Jack, No. 56220, is a fully welded hydraulic unit for maximum durability and leak-free operation. It features a narrow chassis design...
The Thexton Wire Insertion Tool Kit, No. 926, is ideal for installing wires for audio electronics, aftermarket lighting, alarm systems, remote start, and more. The long steel ...
The SP Tools Sprinter Injector Puller Kit, No. 17600, removes injectors from the 2.7L CDI engine. The kit enables technicians to take the top of the injector off easily with the...
The SP Tools Duramax Injector Cup Puller, No. 16100, is designed to remove the injector cup and sleeve without causing damage to the cup on LB7 Duramax diesel engines for models...
The Ascot Supply Tire Service LED Work Light & Replacement Lamp Head features a one-piece 3W high power LED that emits 200 lm on high mode and 80 lm on low mode. With a magnet...
The TEXA eTRUCK OFF-HIGHWAY is designed to allow technicians to remotely perform advanced emissions resets and forced regenerations without leaving the shop. The device is connected...
The TEXA Radar Camera Calibration System (RCCS2) has a robust main support with electrically powered height adjustment and a practical knob to tilt the unit with respect to the...
The Oasis Scientific Vividia HT-A2 IR Infrared Thermal Imaging Camera with high-quality thermal resolution (320x240 pixels) is an easy-to-use troubleshooting tool for automotive...
The KNIPEX 7 1/4" Pliers Wrench is lighter in weight than the previous model and features an increased jaw capacity from 1-3/8" to 1-1/2", as well as a narrow jaw profile for ...
The Lisle Long Reach Hose Clamp Pliers, Nos. 17000 and 17370, are designed with cross-cut tips to grip most hose clamps from multiple angles. The ratcheting lock mechanism holds...
The Hazet Fine Tooth 1/2" Ratchet, No. 916HP, offers 737 ft-lbs of torque for strength and endurance. It has a length of 11" and 90 teeth to allow a 4 degree handle swing when...
The Capri Tools 3/8” Air Angle Impact Wrench, No. CP33100, features 415 ft-lbs of maximum reverse torque and 1,000 rpm of speed. At 3.5” in length with a 10.5” extended handle...
The Snap-on Cooling Refill/Retention Tool, No. RADKITULTRA, is designed for use on auto and truck radiator systems during leak location, repair, and coolant refill. The RADKITULTRA...
The Snap-on Heavy-Duty Reciprocating Air Saw, No. PTRS1000, is designed to cut through 1/8" metal. Featuring a cushioned grip for reduced vibration and less fatigue, the PTRS1000...
