The Cal-Van Tools 5-pc Lug & Lock Flip Socket Set, No. 96100, features sockets designed with six fluted twists for gripping damaged lug nuts. The flip socket on the opposite...
The Cal-Van Tools Bolt Retained Bearing Cup Installer, No. 18510, easily and quickly installs U-joint bearing cups and series 1610-1880 yokes on Class 6-8 vehicles. It features...
The 6-pc 4WD Locknut Socket Set, No. 839, from Cal-Van Tools, is a 1/2" square drive set that allows technicians to use ratchets, breaker bars, and torque wrenches, and the set...
The Cal-Van Tools Toyota Lexus Fuel Tank Lid Tool, No. 25350, offers a 1/2" drive with a nine-slot design. The tool fits firmly into the locking ring, eliminating the risk of ...
The Cal-Van Tools 6-pc Heavy Duty Swivel Type Oil Filter Wrench Set, No. 99100, features a swivel handle that allows users to access filters in hard-to-reach areas. Its wide dimpled...
The Cal-Van Tools 2-in-1 Digital Tire Gauge with Pen Light, No. 85110, comes with an LCD digital backlit display screen for tire pressure testing, two light modes (90 lm and 180...
The Brake Anchor Pin Press, No. 70100, from Cal-Van Tools is designed to remove brake anchor pins and bushings on 16-1/2" S-Cam trailers and Tractor Q brake systems. With this...
The Toyota Lexus Fuel Tank Lid Tool, No. 25350CV, from Cal-Van Tools, is designed to remove the fuel tank lock ring on 2004 and up Toyota and Lexus vehicles. The tool has a 1/...
The Cal-Van Tools Magnetic Field Indicator, No. 82000, can immediately verify if an ignition coil is active or inactive by simply placing the tip near the coil. If the indicator...
The 25-pc Multi-Spline Screw Extractor Set, No. 44200CV, from Cal-Van Tools, is ideal for removing broken screws, bolts, nuts, fittings, and threaded rods. The set features chamfered...
The Cal-Van Tools Brake Line Tube Bender, No. 76110CV, is designed to bend brake lines with a maximum diameter of 3/16" (4.75mm). It's fitted with a 15/64" (6mm) hex slot for ...
The Cal-Van Tools 2-Way Hex Oil Filter Wrench Socket, No. 99710CV, is designed to remove the upper and lower fuel and oil filters. The double-sided socket includes both 24mm and...
The Cal-Van Tools Universal Brake Bleeder Adapter, No. 24630CV, features powder-coated adjustable arms that move vertically and horizontally to securely fit on any brake fluid...
The Cal-Van Tools 2 in 1 Digital Tire Gauge with Pen Light, No. 85110CV, features four units of measure tire gauge modes: psi, bar, kPA, and kg/cm2. It uses a backlit LCD screen...
The Cal-Van Tools Light Bulb Pliers, No. 47, are designed to fit most mini and small automotive bulbs. Due to the bulbs' fragile nature, the pliers are outfitted with rubber-coated...
The Cal-Van Tools Adjustable Jaw Fuel Line Pliers, No. 68800, are designed to disconnect fuel, EVAP and breather, push-style quick connect fittings. Can also be used on some electrical...
Most borescopes use mirrors to achieve alternate viewing angles. Cal-Van's newest borescope, the Dual Camera Wi-Fi Borescope, No. 86, utilizes dual hi-res cameras, bright LED ...
The Cal-Van Tools Bolt Retainer Cup Installer, No. 18510, is designed to make fast and easy work of installing bolt retained bearing cups of 1610 to 1880 series full-round yokes...
The Cal-Van Tools Bearing Cup Installer, No. 20200, is designed for light duty and medium duty U-joints. An encased magnet is utilized for installation, retaining the new bearing...
The Cal-Van Tools Adjustable Indexing Trim Clip Pliers, No. 54, are designed to remove plastic anchors with center pins without causing damage to the pin or the anchor with one...
The Cal-Van Tools Straight Snap Ring Pliers, No. 49, are designed for removing U-joint snap rings, as well as interior clips and body panel fasteners. The pliers are also available...
The Cal-Van Tools Low Profile Ratcheting Pulley Puller, No. 38000, is designed to remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning...
The Cal-Van Tools Ratcheting Harmonic Balancer Puller is designed to remove harmonic balancers without the hassle of trying to start bolts or the frustration of positioning multi...
The Cal-Van Tools Logic Light Circuit Tester, No. 81, features an internal power source that allows for testing the continuity of live and non-live circuits in 6V, 12V, and 24V...
The Cal-Van Tools Dodge Hub Nut Socket, No. 90703, is designed to remove and install 6-pin rear axle locknuts on 2006 to 2014 Dodge/Ram trucks, models 1500 to 5500. This tool ...
The Cal-Van Tools 14-pc Light Duty Slide Hammer and Puller Set, No. 49700, contains interchangeable tools allowing users to tackle many jobs like pulling bearings, seals, and ...
The Cal-Van Tools 10mm Subaru Hex Bit Socket, No. 7541, is designed to make it safer and easier to remove and install cam sprocket bolts on Subaru engines, 2002 to present. The...
The Cal-Van Tools 3-in-1 Cam Subaru Sprocket Holder, No. 754, provides three different tools for holding, removing, and installing multiple cam sprockets on Subaru’s, 2002 to ...
The Cal-Van Tools XL Clip Lifter Set, No. 114, features extra-long reach for more accessibility when dealing with fasteners in limited space. The set utilizes 5mm and 11mm spreads...
The Cal-Van Tools 3-pc Non-Marring Pick Set, No. 112, includes three double-ended picks, providing six different ends for various uses from interiors to engines. The picks are...
The Cal-Van Tools O-Ring Hook and Seal Pick, No. 39, features two high-strength steel ends with an aluminum handle in between them. The handle and ends each have knurled sections...
The Cal-Van Tools Rectangular Inspection Mirror with Dual LEDs, No. 35, features a mirror head with two integrated LEDs, a sturdy ball swivel that can achieve nearly 360-degrees...
The Cal-Van Tools Magnetic Pick-up Tool and LED Pen Light, No. 33, combines two tools in one. The magnet can extend to over 27", making it easier to retrieve metal items from ...
The Cal-Van Tools LED Lighted Inspection Mirror, No. 32, features 37" of extension, a swiveling 2" mirror head that can achieve nearly 360-degrees of rotation, and an ABS plastic...
The Cal-Van Tools Magnetic Pick-Up Tool, No. 30, features 2-1/2 lbs of lifting strength. The sliding magnetic cap and over 25" of extension makes the tool ideal to retrieve items...
The Cal-Van Tools Telescoping Pick-Up Tool, No. 23, has a lifting strength of 16 lbs. It's capable of extending 37", ideal for retrieving items from hard-to-reach areas. The tool...
The Cal-Van Tools 6-pc Hook and Pick Set, No. 22, includes six tools ideal for removing or retrieving O-rings, springs, gaskets, and more from tight and hard-to-reach places. ...
The Cal-Van Tools 4-pc 9-3/4" Hook and Pick Set, No. 21, includes tools ideal for removing or retrieving O-rings, springs, gaskets, and more from tight and hard-to-reach places...
The Cal-Van Ford EcoBoost Long Reach Balancer Installer, No. 38710, is designed to install harmonic balancers of Ford EcoBoost and various other Ford/Lincoln engines from 2011...
The Cal-Van Tools Heavy Duty Tie Rod Wrench, No. 947, is designed for large inner tie rod tubes, ranging between 25mm to 55mm. It can be used on different styles of inner tie ...
The Cal-Van Tools Heavy Duty Yoke Puller, No. 497, is designed to fit multiple sizes of Spicer and Meritor full-round and half-round yokes. It can also be used on differentials...
The Cal-Van Tools C-Frame Socket Press, No. 201, utilizes a 2.5-ton capacity C-frame, included adapters, and the technician's sockets to create an ideal tool for removal and installatio...
The Cal-Van Quick-Change, Front Hub Removal Tool for Dodge and Ford 3/4 and 1-Ton Trucks, No. 90700, is designed to utilize force provided by the vehicle’s power steering to effortlessl...
The Wi-Fi Borescope uses a compact, high-resolution, multiple-aspect camera (up to 1080p) and adjustable LED lighting to give technicians different views without teardown.
Cal-Van Tools U-Joint Puller, Nos. 199, 905, and 907, are designed to make it easier to disassemble the u-joints of many vehicles, from cars and light duty trucks to Class 8 trucks...
The Cal-Van Wi-Fi Borescope, No. 84, features a high-resolution, multiple aspect camera (1920×1080, 1280×720, and 640×480) with adjustable LED lighting. It uses an independent...
The Cal-Van Tools 4-pc Oil Pan Plug Remover, No. 38200, contains tools and adapters to remove plastic oil pan drain plugs found on many late model Ford, Volkswagen, Audi, and ...
The Cal-Van Tools Serpentine Belt Tool, No. 738, is designed to make serpentine belt installations easier. This belt tool is designed to allow access to tensioners to relieve ...
The Cal-Van Tools Subaru Belt Tool, No. 737, is designed to make installing drive belts on Subaru vehicles easier. The tool includes everything needed to easily install the new...
The Cal-Van Tools Stretch Belt Installation Tool, No. 736, is designed to make installing new stretch belts easier and faster. The design helps increase the ease of installation...
The Cal-Van Tools Euro Stretch Belt Installation Tool, No. 735, is designed to make installing stretch belts quicker and easier. With multiple large adjustable pins, this tool...
The Cal-Van Tools A/C Belt Installation Tool, No. 732, helps users properly install stretch belts on newer model vehicles without causing damage to other components, the company...
The Cal-Van Tools O2 Sensor Thread Chaser, No. 841-11, can be utilized with a 3/8" drive tool or a 13/16" 6 point socket to restore and/or clean the threads of a M20 O2 sensor...
The Cal-Van Tools 4-pc Plastic Oil Pan Drain Plug Tool Set, No. 38200, contains tools and bits to remove plastic oil pan drain plugs that are found on many late model Ford, Volkswagen...
The Cal-Van Tools Mirror Tube Bender, No. 75902, is designed to allow users to precisely match the proper angle and point on run to make bends. This tool is for steel, copper ...
The Cal-Van Tools Toyota Front Hub Nut Socket, No. 977, is designed for easy removal and installation on front hub lock nuts without damage to the nut. The tool is designed to...
The Cal-Van Tools Versa Drive 2 in 1 adapters work with cordless or electric drills to allow the user to switch between bits and sockets without the hassle of changing adapters...
The Cal-Van Tools Universal Hose Clamp Pliers, No. 59, has a "waffle" iron styled design which allows the plier to grab and compress almost any clamp from any angle. The tool ...
The Cal-Van Tools 12 and 6 Point Flexible Oxygen Sensor Wrench, No. 844, is designed for use with most oxygen sensors. This tool has a double-sided design that allows technicians...
The Cal-Van Tools 1/2" Extendable Breaker Bar, No. 480, extends from 15” to 25” and is backed by a lifetime warranty. In independent lab testing, torque forces measured 6,800 ...
The Cal-Van Tools Double Tube Deburr Tool, No. 169, is designed to work on both I.D. and O.D. of cut lines to remove burrs when performing secondary operations to tubes. This ...
The Cal-Van Tools Dodge Wheel and Hub Removal Adapter, No. 90300, is designed to remove the front hubs found on 3/4-ton (2500 series) and 1-ton (3500 series) Dodge pickup trucks...
The Cal-Van Tools Ball Joint Super Set, No. 197, is designed for the removal and installation of press-fit ball joints on various makes and models of trucks, cars, vans and SUVs...
The Constant Pressure Tube Cutter from Cal-Van Tools uses a spring to keep consistent compression on the cutting blade to the tube. This constant pressure is designed to allow...
The Cal-Van Tools Quick Change Wheel Stud Cleaner, No. 16, kit features a 1/2" D adapter and six brushes. Brush sizes include 12mm, 13mm, 14mm, 16mm and 24mm. Brushes are designed...
The Cal-Van Tools 12-point Metric Axle Nut Socket Set, No. 976, features eight heavy duty metric sockets that fit axle nuts and automatic transmission tail output shafts on Toyota...
The Stripped Hex Screw Sets by Cal-Van Tools are available in metric (No. 439) and SAE (No. 440) sizes. These 9-pc sets are designed for removing rounded or stripped fasteners...
The Cal-Van Tools Adjustable Bearing Seal Driver, No. 506, eliminates the need for a driver and different size adapters. The durable, aluminum constructed tool comes equipped ...
The Cal-Van Adjustable Puller, No. 957, offers a low profile design that can reach into tight places. The jaws stay put before tension is applied. The puller has three jaws, a...
The Cal-Van Tools Wheel Bearing Tool, No. 904, is for use on front wheel drive cars and light trucks. The wheel bearing adapters allow the user to replace the wheel bearings with...
The Cal-Van Tools Universal Caliper Turn and Push-Back Tool, No. 727, features two pivoting pins on a detachable head that allows the unit to engage almost any different caliper...
The Cal-Van Heavy Duty U-Joint Puller, No. 199, is a heavy duty solution for disassembling seized, stubborn U-joints quickly on most Class 7 and 8 trucks and machinery. Engineered...
The Cal-Van Tools Hydraulic in-Line Flaring Tool, No. 166, was developed because technicians needed to be able to apply more forming pressure with less effort. The tool combines...
The Cal-Van Tools 2- and 3-Pin Adjustable Brake Piston Tool, No. 723, designed to rotate brake pistons back into the caliper on most domestic and import vehicles with self-adjusting...
The Cal-Van Tools Amp Hound 2, an amp meter for fused circuits, offers real-time readings of current and amps in a fused circuit without removing the fuse. By touching the probes...
The Cal-Van Tools Ford and Mazda Camshaft Alignment Kit is designed for servicing the timing belt, chains, head gaskets or other valve train repairs on Ford, Mercury and Mazda...
The Cal-Van Tools Drain Plug Repair Kit, No. 38400, is designed to repair aluminum oil pans with damaged drain plug threads size M12 by 1.75 commonly found in GM, Ford and Mazda...
The Cal-Van Tools Oxygen Sensor Wrench, No. 843, features a flex head that offers essential clearance for removal and installation of oxygen sensors when positioned upward and...
The Cal-Van Tools Master Harmonic Balancer and Pulley Installer, No. 38500, is a comprehensive set that works as a traditional harmonic balancer installer and also works on long...
The Cal-Van Tools Boost portable power source, No. 550, offers 300 cold-cranking amps, a 12V emergency start, LED flashlight, USB port for device use and charging, a durable carrying...
The Cal-Van Tools ChargeSmart, No. 543, is designed to safely charge and maintain 6V and 12V conventional, maintenance-free and 12V AGM batteries. The 100-percent true recharge...
Cal-Van Tools' Quick Ripple Tester, No. 73, can easily and efficiently test alternators for a variety of issues, including excessive ripple, through the DC Cord outlet in the ...
Use the Cal-Van Tools Long Reach Harmonic Balancer Installer, No. 38700, for the installation of underdrive or oversized pulleys, and applications with recessed threads on the...
Cal-Van' Master Inline Flaring Set, No. 165, contains in-line flaring tools with a unique design that locks the adapters, cone and tube in a perfect line making factory flares...
Cal-Van Tools' GM Thermostat Wrench, No. 751, can work on GM 3.1 and 3.4L V6 engines. Thermostat replacement forces the technician to remove the thermostat housing. In these application...
The Cal-Van Tools Constant Pressure Tube Cutter, No. 157, utilizes a spring to keep consistent compression on the cutting blade to the tube. This allows the user to cut through...
Cal-Van Tools' Automotive Bubble Flare Kit, No. 155, makes bubble flares on 4.75mm soft steel or copper tubing. This in-line flaring tool can do factory flares with ease and can...
The Cal-Van Relay Circuit Pro, No. 76, allows users to test all circuits associated with a given relay. The unit tests from the battery to the relay, relay to ignition or switch...
The Cal-Van Tools In-Line Dowel Pin Puller Kit helps safely remove dowel pins without the use of a slide hammer. Users simply fit the appropriate sized collet over the dowel, ...
The Cal-Van Tools' 2-In-1 S-Cam Brake Tool offers technicians a more efficient method for changing brake shoes on an S-cam drum brake assembly. The tool is comprised of a steel...
The Cal-Van Tools Three-Valve Ford Triton Insert Kit, No. 39300, is designed to aid in the repair of, three-valve 5.4L and 6.8L engines built before October 9, 2007 and three-...
The Cal-Van Tools Hub Tool, No. 90100, is designed for removing the hub assembly from Ford 4-Wheel Drive Pickup Trucks when replacing ball joints, without causing damage to the...
The In-Line Flaring Tool from Cal-Van Tools allows users to flare copper or soft steel tubing in tight spaces with its low profile design, for use on or off the vehicle. Designed...
The Cal-Van Tools Heater Hose Disconnect Tools, No. 244TNZ, are designed to completely fill the void in the connector to release the fastener. There is also a 40-degree offset...
The Cal-Van Tools' 230TNZ Fuel Line service tools were designed to remove stubborn fuel lines. To use, force the tapered end into the disconnect, instantly disconnecting from ...
The 75 Relay Circuit Tester from Cal-Van Tools can test an entire circuit from the battery to the component in question. This tool gives technicians the ability to instantly determine...
Cal-Van Tools' multi-purpose Speed Stick Set, No. 881SET, can be used for motorcycles, racing, home use, and more. The set includes 3/8" speed stick, 1/4" speed stick (both 12...
The Cal-Van Serpentine Belt Tool, No. 734, allows the technician to grab hold of the belt and place it into the position needed. The ability to hold on to the belt makes the technician...
Cal Van Tools' Rear Bearing Puller, No. 91800, quickly and easily removes rear bearing wheel axles; no more banging with a slide hammer to remover these difficult bearings. Use...
Cal Van Tools's Tie-rod End Tool, No. 946, is compact for an easier fit in the toolbox and smoothly, easily turns aftermarket tie rods. Simply slide the tool over the end and ...