Delphi introduces 19 new oxygen sensors cover more than 1.2 million North American Audi, Volkswagen, BMW, Cooper, Nissan, Infiniti, Mazda and Honda vehicles from 1995 to present. Part numbers:  ES11079, ES11080, ES11081, ES11082, ES11083, ES11084, ES20386, ES20387, ES20388, ES20389, ES20390, ES20391, ES20392, ES20393, ES20394, ES20395, ES20396, ES20397 and ES20403.

Please visit go.delphi.com for specific part information. Inventory will be available Q4 2012.

Like this article? Sign up for our enews blasts here.

Delphi oxygen sensors lead the industry in contamination resistance to silicone, phosphorous and other fuel and oil additives due to a patented protective sensor coating. Our exclusive poison-protection coating protects elements from contaminants, which can trigger “check engine lights” and premature sensor failure. Contaminated sensors can cause engines to burn up to 25% more fuel and send excess carbon dioxide, hydrocarbon and nitrogen oxide emissions into the atmosphere.

They also feature OE connectors and wire lengths within three inches of OE specifications. Nearly three-quarters of the line is the exact OE length, which means easier installations without splicing and fewer customer comebacks. Delphi’s dry-to-touch, anti-seize compound means faster installations.

Delphi oxygen sensors deliver the industry’s fastest light-off time of six seconds. This allows the O2 sensor to go into closed loop with the ECM faster, reducing pollutants and improving emissions.

Delphi oxygen sensors, feed data to the ECM which helps the engine run as efficiently as possible while maintaining fuel mileage and reducing emissions. Because the amount of oxygen the engine pulls in can vary due to altitude, air temperature, engine load, the O2 sensors optimize combustion by monitoring oxygen levels so the proper amount of fuel can be combined with the air.

Learn more about Delphi at delphi.com/am.