This bulletin applies to BMW 2-Series Gran Coupe, X1, X2, X5, X6 and X7 Sports Activity, G09, 5-Series Sedan, 7-Series Sedan, M5 Sedan, M5 Touring vehicles.

After programming from the I-Levels between 24-03-505 and lower than 24-03-540 to I-Level 24-11530 or higher, CCM-2525 Brake System/Drive at moderate speed message may appear.

The cause: An imminent failure if the integrated braking system (IB) has been detected and fault code 480B18 may be found (DSC unit: internal position sensor linear actuator, electrical fault). Replace the IB module for the 480B18 fault code.