Infiniti Axle Click

June 11, 2021
This bulletin applies to 2009-2013 Infiniti EX35.EX37, FX35/FX37/FX50, 2011-2012 G25, 209-2013 G37, 2013 JX35, 2011-2013 M37/M56, 2012-2013 M35, 2011-2013 QX56, 2014-2019 QX80 and 2015 Q40 vehicles

This bulletin applies to 2009-2013 Infiniti EX35.EX37, FX35/FX37/FX50, 2011-2012 G25, 209-2013 G37, 2013 JX35, 2011-2013 M37/M56, 2012-2013 M35, 2011-2013 QX56, 2014-2019 QX80 and 2015 Q40 vehicles. A clicking noise may be heard coming from either left or right front/rear axles during takeoff/acceleration. The solution: apply Molykote M77 grease to the hub bearing surfaces. This grease is available as P/N 44003-7S000.

Do not remove the axle from the hub or transmission for this service.

Remove the front or rear (depending on model) wheel bearing cotter pin and lock nut from the axle.

Push the axle back to allow application of Molykote 77 grease.

Apply a moderate amount of grease to the entire wheel hub bearing surface.

Re-install the wheel bearing lock nut and cotter pin. Refer to the service manual for the specific vehicle for nut torque value.

Apply a moderate amount of Molykote 77 grease to the entire wheel hub bearing surface.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of  specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.

Sponsored Recommendations

Gain expert insight into today’s evaporative emission systems and why OE-matched EVAP components are crucial for performance and compliance. See how Standard® delivers precision...
There is a difference in gas fuel injectors. Learn why Under the Hood’s Russ Evans uses Standard Fuel Injectors on his customer’s vehicles.
Just following a few simple tips can improve your pneumatic tool's performance and provide years of safe, maintenance-free service. Dive in to see what you could apply to your...
Hear what senior autotechs have to say about the AIRCAT Nitrocat 1056-XL compact impact wrench. They’ll provide their reviews on tools they own and have been using every day on...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!