TSBs

Replacing Ford F-150 Catalytic Converter

Dec. 7, 2022

Some 2015-2016 Ford F-150 trucks equipped with a 2.7L GTDI engine and built on or before Dec. 18, 2015 may exhibit a MIL on with DTC P0420 stored in continuous memory.

Information courtesy of Mitchell 1

Mike Mavrigian

Some 2015-2016 Ford F-150 trucks equipped with a 2.7L GTDI engine and built on or before Dec. 18, 2015 may exhibit a MIL on with DTC P0420 stored in continuous memory.

If this DTC is found, replace the right side catalytic converter and reprogram the PCM to the latest calibration using IDS release 98.04 or higher. For non green state emissions, us P/N FL3Z-5E212-L. For green state emissions use FL3Z-5E212-R.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.