This bulletin applies to 2011 Subaru Forester 2.5L naturally-aspirated models. DTC P0108 (manifold absolute pressure/barometric pressure circuit high input) may be found in memory.
This bulletin applies to 2011 Subaru Forester 2.5L naturally-aspirated models. DTC P0108 (manifold absolute pressure/barometric pressure circuit high input) may be found in memory.
It is possible that this DTC can be erroneously stored in memory when the starter motor is stopped before the engine starts completely. This can occur if the ignition key is released before the engine fully starts or if the clutch pedal is released before the engine fully starts. If you determine that the code was set in error, new ECM reprogramming files are available to prevent the recurrence of this condition.
The new logic was introduced in production on August 3, 2011 starting with VIN B*782579.
FILE P/N AFTER OLD P/N MODEL
22765AB404.pak…22765AB404………22765AB403….Forester 2.5L N/A AT CAL
22765AB414.pak…22765AB414…...….22765AB413….Forester 2.5L N/A MT CAL
22765AB424.pak…22765AB424…...….22765AB423….Forester 2.5L N/A AT FED
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
