A “small number” of 2013-2014 Dodge Darts equipped with a 2.4L engine and built on or before Feb. 14, 2014, may experience a MIL on with DTC P2251 (O2 sensor 1/1 negative current control circuit open).
A “small number” of 2013-2014 Dodge Darts equipped with a 2.4L engine and built on or before Feb. 14, 2014, may experience a MIL on with DTC P2251 (O2 sensor 1/1 negative current control circuit open).
Using a scan tool (wiTECH) verify that all engine systems are functioning as designed. If DTCs other than P2251 are stored, record and repair as needed before proceeding further.
Install a battery charger to ensure that battery voltage does not drop below 13.2 volts or rise above 13.5 volts during the flash process.
Reprogram the PCM with the latest software Follow the detailed procedures available in DealerCONNECT/TechCONNECT, Group 8 – Electrical > Electronic Control Modules – Service Information > Module – Powertrain Control > Standard Procedures > PCM/ECM Programming.
After PCM reprogramming, clear any DTCs that may have set n other modules.
The expected completion time for the flash download portion of this procedure is about 15 minutes.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
