Tool review: Atlas Platinum PVL-12

Aug. 6, 2019
The reviewer appreciated the extra height and width of the lift, as well as the weight capacity.

The review

For shop owners looking for safe, easy-to-use lifts that are also affordable, research is a necessity. Shop owner James Lyman of Lyman Automotive in Midlothian, Virginia, did quite a bit of research before he found the lift that met his requirements: the Atlas Platinum PVL-12.

“I bought Atlas lifts in the past and was always happy with them,” Lyman says. “The price point is good, as well.”

Lyman recently opened a second shop in Powhatan, Virginia, where he has installed the Atlas Platinum PVL-12, along with another Atlas lift.

He and his team of technicians especially like the weight capacity of 12,000 lbs, the extra distance between the two columns, and the added lift height. At his shop in Midlothian, Lyman has lifts that have a 9,000-lb. capacity, but when he opened his second shop location he wanted lifts with higher weight capacity. So, he purchased one that has a 10,000-lb capacity as well as the two-post, overhead Platinum PVL-12.

Having the extra capacity comes in handy.

“We work on just about everything, including trucks and SUVs,” Lyman says. “If you have a 9,000-lb lift and a truck weighs 9,000 lbs, to me that’s a little sketchy. I’d rather lift a 9000-lb truck on a 12,000-lb lift. I just feel safer about it.”

The same goes for the additional height.

“If you had, let’s say, a truck with a ladder rack on it, with a normal lift you wouldn’t be able to pick it up,” Lyman says. “But with [the Atlas Platinum PVL-12], because it’s extra tall, you don’t have a problem lifting it and getting underneath it.”

Other key features that Lyman noted about the Platinum PVL-12 is that it’s very easy to use and easy to maintain. The Atlas lift is powered by a 220V motor. It takes about two minutes for a vehicle to get set up on the lift and then raised, and less than a minute for the lift to lower the vehicle back down, Lyman says.

As for initial setup of the lift, Lyman said it didn’t take any more than other comparable lifts to install. The lift included instructions, but Lyman was not impressed with them, noting they could be improved.

The lift also came with truck adapters which Lyman and his team have used, and he says they work very well.

Lyman noted that while the lift’s large, fully adjustable arms are ideal for lifting trucks and SUVs, “it’s sometimes hard to get small cars on the lift because the arms are so large.”

Overall, his research paid off. Lyman is very pleased with his purchase for the new shop. The 12,000-lb weight capacity, along with the additional height and width were top features that sold this reviewer. 

About the Author

Kayla Nadler | Associate Editor | Vehicle Repair Group

Kayla (Oschmann) Nadler was previously an associate editor for the Vehicle Repair Group.

With an education in journalism and public relations, Nadler contributed to Professional Tool & Equipment News (PTEN) and Professional Distributor magazines, as well as VehicleServicePros.com.

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!