Content brought to you by PTEN. To subscribe, click here.

Application

Dynamic Tools 44-pc Insulated Socket and Tool Set is designed for:

• Electrical panel and load center work: breaker changes, terminations, panel and cover hardware. 
• Motor control center, starter, contactor, disconnect, and switchgear maintenance. 
• Plant and MRO work on motors, drives, control cabinets, and machine electrical systems. 
• Solar and battery energy storage installation and service. 
• Generator, transfer switch, and standby power service. 
• EV charging station installation and service, and high-voltage battery and drivetrain work on hybrid and electric fleet vehicles. 

Features and benefits

• Forty-four pieces: 12 standard sockets (8 to 19mm), seven deep sockets, five hex bit sockets (4 to 10mm), eight Torx sockets (T10 to T45), eight nut drivers (5 to 11mm), a 3/8" drive quick release ratchet and extension, an insulated adjustable wrench, and a cable knife. 
• The 45-tooth quick-release ratchet turns in roughly 8 degrees of arc, making it usable inside a crowded panel or switchgear cabinet. 
• Deep sockets reach studs, long threads, and busbar hardware without stacking adapters that would break the insulated barrier. 
• Dual-layer red and black foam with size-imprinted cutouts, which allows users to find the right size quickly and spot missing tools. 

Origin

Technicians doing energized electrical work rarely have enough insulated coverage to finish a job in one kit, and the sets that do cover it have been priced as specialty equipment. This set was developed as a one-stop insulated kit at a more affordable price from a trusted company with over 100 years offering industrial quality tools to the North Amercian market.

Manufacturing and engineering specifications 

• Manufactured in Taiwan to Gray Tools specifications. Gray Tools has manufactured and distributed hand tools in North America since 1912. Dynamic is a registered trademark of Gray Tools. 
• Multi-layer injection-molded insulation over the tool body. Each tool is individually tested at 10,000V AC, VDE certified to 1,000V AC, and compliant with IEC 60900. 
• Case: Approximately 17" by 14" by 3.5" with lockable blow molded plastic and two removable foam organizers. 
• Ratchet: 3/8" drive, 45-tooth, 7-3/4" long
• Extension: 6-3/4" long
• Adjustable wrench: 8-1/2" long
• Cable knife: 7-1/2" long 
• Weight: 12lbs