Content brought to you by Professional Distributor. To subscribe, click here.

Application

Dynamic Tools 44-pc Insulated Socket and Tool Set is designed for:

• Electrical panel and load center work: breaker changes, terminations, panel and cover hardware. 
• Motor control center, starter, contactor, disconnect, and switchgear maintenance. 
• Plant and MRO work on motors, drives, control cabinets, and machine electrical systems. 
• Solar and battery energy storage installation and service. 
• Generator, transfer switch, and standby power service. 
• EV charging station installation and service, and high-voltage battery and drivetrain work on hybrid and electric fleet vehicles. 

Features and benefits

• Forty-four pieces: 12 standard sockets (8 to 19mm), seven deep sockets, five hex bit sockets (4 to 10mm), eight Torx sockets (T10 to T45), eight nut drivers (5 to 11mm), a 3/8" drive quick release ratchet and extension, an insulated adjustable wrench, and a cable knife. 
• The 45-tooth quick-release ratchet turns in roughly 8 degrees of arc, making it usable inside a crowded panel or switchgear cabinet. 
• Deep sockets reach studs, long threads, and busbar hardware without stacking adapters that would break the insulated barrier. 
• Dual-layer red and black foam with size-imprinted cutouts, which allows users to find the right size quickly and spot missing tools. 

Selling points 

• Insulated tools are required in many work settings. That makes this a compliance sale, which closes faster than another chrome socket set. 
• A complete set to finish the job, featuring a full 3/8" drive metric range plus hex bit, Torx, nut drivers, and a cable knife, so the technician never has to reach for an uninsulated tool mid-task. 
• Every tool is individually tested at 10,000V AC, VDE certified to 1,000V AC, and compliant with IEC 60900. 
• Priced below premium European insulated sets, with a limited lifetime warranty and North American service from Gray Tools.
• Built in repeat business. Any nick or cut in the insulation permanently retires that tool, so the set leads to ongoing replacement sales. 

Origin

Technicians doing energized electrical work rarely have enough insulated coverage to finish a job in one kit, and the sets that do cover it have been priced as specialty equipment. This set was developed as a one-stop insulated kit at a more affordable price from a trusted company with over 100 years offering industrial quality tools to the North Amercian market.

Manufacturing and engineering specifications 

• Manufactured in Taiwan to Gray Tools specifications. Gray Tools has manufactured and distributed hand tools in North America since 1912. Dynamic is a registered trademark of Gray Tools. 
• Multi-layer injection-molded insulation over the tool body. Each tool is individually tested at 10,000V AC, VDE certified to 1,000V AC, and compliant with IEC 60900. 
• Case: Approximately 17" by 14" by 3.5" with lockable blow molded plastic and two removable foam organizers. 
• Ratchet: 3/8" drive, 45-tooth, 7-3/4" long
• Extension: 6-3/4" long
• Adjustable wrench: 8-1/2" long
• Cable knife: 7-1/2" long 
• Weight: 12lbs 

Storage and display

The set ships in its own lockable blow molded case, which is also the retail package. At 17" by 14" by 3.5", it stands on a shelf or lies flat in a drawer. Pair it with other insulated tools, such as insulated screwdrivers, pliers, or nut driver sets to step buyers up or down in price. 

Demonstration

Display the product with the case open. The dual-layer foam with imprinted sizes provides great visual impact. Emphasise safety over cost. 

Suggested retail price

$499.99

For more information

Contact Gray Tools at 1-800-471-9473, email [email protected], or visit shopdynamictools.com.