Clore introduces the PRO-LOGIX PL6100 from SOLAR

Aug. 7, 2019
The PL6100 is a 12V 100A flashing power supply and 60/40/10A battery charger.

Clore Automotive introduced the PRO-LOGIX PL6100, from SOLAR, a 12V 100A flashing power supply and 60/40/10A battery charger. The PL6100 is designed to provide stable power on demand, up to 100A, to a vehicle electrical system to support module reprogramming. It also provides full-service battery charging capability from 10 to 60A, to service everything from small vehicle batteries to Group 31 batteries.

In power supply mode, the PRO-LOGIX PL6100 provides power to maintain vehicle electrical system voltage at a preset level, increasing its output in response to system load increases to maintain a stable power environment for successful reprogramming. It features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments, allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. It features fast load responsiveness for recovery from system demand increases. It also delivers its power with minimal voltage ripple, providing a clean flow of power to the vehicle without risk of programming interference.

In charging mode, the PL6100 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery or battery pack serviced. The PL6100 features the ability to properly charge a wide variety of lead acid battery types, including conventional, AGM, spiral wound, start-stop, deep cycle, and marine batteries.

In charging mode, the PL6100 adapts its approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries, and temperature compensation when charging in extreme temperatures. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged, including over-voltage protection, reverse polarity protection, smart clamp technology, and battery fault detection.

Sponsored Recommendations

Variable Valve Timing (VVT) Training Series

Almost every new vehicle is equipped with VVT technology. This video explains the weak points in OE designs and gives you a complete overview of the replacement options available...

Cam & Crank Sensor Training Series

Today's advanced engines depend on accurate and consistent information from cam and crank sensors for performance, fuel economy and emissions, and not all cam and crank sensors...

Buying Your Next Diagnostic Tablet

When you last invested in a diagnostic tablet for your shop, did you consider it a potential gateway to increased revenue? Probably not. It’s likely you viewed it as a necessary...

Access Carside OEM Repair Data with MOTOR TruSpeed

Now available on all Autel MaxiSYS Ultra Series tools, MOTOR TruSpeed Repair delivers expanded OEM service and repair data within days of being published by

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!