In Focus: Clore Automotive SOLAR Pro-Logix 12V 100A Flashing Power Supply and 60/40/10A Battery Charger, No. PL6100
Selling points
- The PL600 is designed for shops performing flashing/reprogramming
- The PL6100 is designed as a charger for all automotive servicing needs
- The PL6100 is manufactured with robust construction and convenience features
Features and benefits
- Delivers up to 100A to maintain system voltage during reprogramming events
- Features very low voltage ripple for clean power delivery
- Features rapid load response for quick recovery from load increases
- Allows voltage control from 13.1-14.9V, in 0.1V increments
- Fully automatic operation
- 60/40/10A charge rates handle everything from small batteries to Group 31 batteries
- Specific charging routines for flooded, AGM, spiral wound, deep cycle, and marine batteries
- Able to manage completely dead batteries
- Sturdy steel frame stands up to harsh shop environments
- Detachable input and output cords
- Extra-long 13’ output cables reach the starting points on vehicles
- Heavy duty PowerJaw clamps provide power transfer and are angled for improved access
- Easy-to-use interface with smart display feedback
Application
The PL6100 is a flashing power supply for shops; its clean power delivery provides support for reflashing events, and its adjustability allows it to meet OE voltage requirements. It provides comprehensive charging capabilities, enabling coverage for two applications: flashing power supply and heavy duty battery charging.
Origin
The PL6100 was developed to address the market need for a versatile, precise, high amperage power supply that can meet OE voltage requirements. The PL6100 also incorporates advanced battery charging capabilities.
Manufacturing specs
The PL6100 is ETL-approved to meet the UL1236 Battery Charging standard, as well as all FCC requirements for high frequency devices, according to the company. It features heavy duty steel construction and extra-long #2 AWG output cables. It delivers a power supply with voltage ripple greater than 100mV, as well as Rapid Load Response Technology.
Storage and display
The PL6100 is shipped as a single unit, double boxed for added protection. Clore Automotive suggests storing the PL6100 on the top of a toolbox or on a prominent shelf.
Suggested retail price
$799
For more information
1 (800) 328-2921
The Clore Automotive SOLAR Pro-Logix 12V 100A Flashing Power Supply and 60/40/10A Battery Charger, No. PL6100, is designed to provide stable power on-demand, up to 100A, to a vehicle electrical system to support module reprogramming. It also provides full-service battery charging capability from 10A to 60A, to service everything from small vehicle batteries to Group 31 batteries. In power supply mode, it features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments, allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. In charging mode, it features over-voltage protection, reverse polarity protection, smart clamp technology, and battery fault detection.