Lift Supplement - March 2025

The Ford 3.5L and 3.7L EcoBoost Engine Out Lift Plate Hoist Tool, No. STC50133, from Steck Manufacturing, is specifically designed for both turbo and non-turbo Ford EcoBoost engines...

The BedLock System, No. BL-450A/B from BedLock Safety Products is engineered to prevent the unexpected movement of the raised dump bed, increasing user safety. With its robust...

The Challenger Lifts HD Mobile Column Lifts can lift any rubber-tired vehicle within its rated capacity of 152,000 lbs without pits, cables, or compressed air. Each column operates...

The Kangaroo Jack, WS-24-LPJ, from ARI-Hetra, is designed with precision and durability in mind. This hydraulic jack is equipped with a versatile, adjustable lifting bracket ensuring...

The Scissor Lifting Table, No. SLT-2500, from Mohawk Lifts, is a heavy duty lift capable of lifting up to 2,500 lbs. The lift is engineered to accommodate transmissions or differential...

The Atlas Commercial-Grade Two-Post Baseplate Lift is designed for lifting heavy vehicles in low-ceiling garages. It features a single-point lock release and 9' 4" columns with...

The SUNEX Tools 2-Ton Off-Road Jack, No. 6602RJ features a 28.4" lift height and a dual piston mechanism for rapid lifting. It has a full-length wraparound steel skid plate for...

The CEAS 2,640-lb Lifting Table, Electric/Hydraulic w/ Adapters is designed to remove/replace battery packs for electric vehicles and engine, transmission, drive axle, fuel tank...

The Gray Manufacturing Wireless Mobile Column Lifts, Nos. WPLS-135, WPLS-185, and WPLS-185W, feature a wireless communication system and touchscreen graphic control system...

The 1/2-Ton Two-Stage Telescopic Jack Stand, No. 371-03321, from Ascot Supply, uses foot pedals for handsfree operation. An overload valve prevents the jack from being used beyond...

The OEMTOOLS 2-1/2 Ton Aluminum/Steel Hybrid Floor Jack, No. 24869, features an aluminum construction and steel frame that provides the benefit of strength within a lightweight...

The Thexton Lift Alignment Tool, No. 962, is designed to streamline the positioning of lift arms to vehicle lift points. With the capability to position both front and rear arms...

The Tuxedo Distributors iDEAL EV/Hybrid Lift Table, No. LT-EV2500AH-X incorporates multi-adjustable and directional EV-insulated platforms for controlled lifting and lowering ...

The Rotary Lift Two-Post Asymmetric Lift with All-Vehicle Lift Arms, No. SPOA10-AV, is designed to accommodate all vehicle types under 10,000 lbs with its all-vehicle (AV) lift...

The Hunter Engineering RX14KL and RX16KL Scissor Alignment Lifts can accommodate up to a 195" two-wheel wheelbase, offering longer variations of Hunter's RX14 and RX16 Scissor...

The Harbor Freight Daytona 3-Ton Super Duty Floor Jack in Metallic Purple is a low-profile floor jack featuring Rapid Pump technology with a dual-piston hydraulic system that ...

The Autel Alignment Scissor Lift is a flush/surface-mounted hydraulic vehicle lift compatible with passenger cars and light trucks and is available in 12,000 and 14,000 lb capacity...

The 1-1/2 Ton Hydraulic Transmission Jack, No. FTJ150, from Snap-on, uses articulating saddle arms that can quickly adjust without additional adaptors, creating a secure fit for...

The AFF 2 Ton Lightning Lift Super Duty Long Chassis Floor Jack, No. 202LCJ, features single piston, one-pump-to-load technology. The jack has a minimum height of 2.9” and a maximum...

The ATD Tools 1/2-Ton Hydraulic Telescope Transmission Jack, No. 7429, features an extra wide base for stability. It has a capacity of 1,000 lbs and rises to a maximum height ...