The Whiteside Either End Adjustable Creeper, No. MTL2UP, is a US-made creeper designed to adjust from either end providing support to the back and bottom in various positions ...
The CTA BMW Crankshaft Front and Rear Seal Removal and Installer Kit, No. 7643, removes and installs front and rear crankshafts on chassis models N40, N42, N45T, N46T, N52, N52K...
The Medina Foods GoldRush Desert Fire Hot Beef Jerky features crushed red pepper that scorches the senses with heat and spices, the company says. This spicy, flavorful product...
The Digitool Solutions SPT Torque Tester is designed to offer an accuracy level of +/- 0.5 percent of reading 10 to 100 percent of scale. The SPT operates in both CW and CCW directions...
The Matco Tools E-Z Solder Clamp, No. EZSOLD, is designed to act as a third hand, with a unique aluminum body that holds the wire firmly with a solder feed from the handle, the...
The Makita 18V LXT Sub-Compact Brushless 3/8" Square Drive Impact Wrench, No. XWT12RB, is designed to give users 12V handling with 18V performance, and is compatible with Makita...
The Strong Hold Plus Single Shift Cabinets feature one compartment secured with a three-point locking system. The cabinets are available in five standard sizes to allow users ...
The Klein Tools Hybrid Pliers with Crimper, No. J215-8CR, feature a high leverage design for improved cutting power. This multi-purpose tool has five functions: cleanly strips...
The Allstart ReFuel 10000 Power Bank, No. 581, is a compact, pocket-sized device designed for keeping electronics charged on the go. This power bank offers up to six phone charges...
The S&G Tool Aid Corp. Terminal Crimper with Rotating Die Set, No. 18840, is designed for 8 - 4/0 AWG uninsulated terminals for crimping copper electrical and battery terminals...
The Coats RC-45 Rim Clamp Tire Changer is designed for general service repair shops looking for a durable and reliable tire changer. The RC-45 offers a compact design and a chassis...
The Cornwell Auto Darkening Welding Mask With Hood, No. FFG32007, is designed for confined space work and mobile welding. This mask includes a bump cap for head and fire retardant...
The Lang Tools Light Duty Truck Diesel Compression Tester is designed to work on the most popular vehicles on the road. This tester has a gauge of 0 to 1,000 psi, maintains the...
The Cal-Van Tools Toyota Front Hub Nut Socket, No. 977, is designed for easy removal and installation on front hub lock nuts without damage to the nut. The tool is designed to...
The OEMTOOLS Pivoting Ultra-Slim Work Light, No. 24696, offers a lightweight, thin design that is powerful enough to provide bright light wherever needed. The slim wand features...
The Hunter WinAlign HD QuickGrip Adapters are designed for faster installation to speed alignment service and no metal-to-metal contact to prevent rim damage. The adapters allow...
The Schumacher DSR128 Lithium Ion Jump Starter provides 2,000 peak amps and 650 cranking amps for 12V systems. Powered by two lithium iron phosphate batteries, this starter offers...
AGS’s NiCopp EZ-FIT Complete Brake Line Replacement Kits are an efficient alternative to pre-bent brake line kits. Each application specific kit comes with all the lines cut to...
The Cemb-USA EZ1 Wheel Balancer is designed to mount on a tire changer. The hand-spin, manual data entry, five second cycle time fits swing arm tire changers with round columns...
The Coats Grip-Max Plus Clamps are designed to prevent damage to the rims when servicing alloy wheels. The Grip-Max Plus Clamps offer a three-position clamp that allows for adjustments...
The Clore Light-N-Carry 1,500 lm Flood Light, No. LNC2251, offers advanced COB technology for clean output, no sharp edges and long run-times. This light features a 1,500 lm max...
ReadySmoke by Redline is a compact, cost-competitive smoke machine that is made in America. A smoke machine allows technicians to quickly detect, locate and repair leaks in any...
The Ascot Supply Professional Stud and Hub Brush Kit is ideal for cleaning hubs and studs on passenger cars and trucks with ease. It is powered by a cordless drill and comes with...
The VIM Tools 8-pc Impact Torx Bits, No. IMPACT-8TX, include T25 through T55 5/16" shank bits in a plastic holder. The bits are made from S2 high alloy steel and heat treated ...
The KTI TPMS Pro with OBD-II Module, No. KTITPSOBD, is designed to program all major leading aftermarket TPMS sensor brands, offering a 98.6 percent TPMS sensor coverage, according...
The OEMTOOLS Locking Lug Master Key Set, No. 24447, is designed to remove locking lug nuts on most aftermarket wheels. This set offers thin wall sockets and extra-long lug keys...
The Muller-Kueps Tie Rod Wrench is designed to help users handle rusty tie rods when performing car alignments. This wrench offers the grip to hold onto any round or hex surface...
The Cal-Van Tools Dodge Wheel and Hub Removal Adapter, No. 90300, is designed to remove the front hubs found on 3/4-ton (2500 series) and 1-ton (3500 series) Dodge pickup trucks...
The Clore Automotive Light-N-Carry 500 lm COB LED Worklight, No. LNC1341, provides 300 lm output on high and 90 lm on low. The light also offers a 60 lm SMD focus beam function...
The Homak 41" H2Pro Roller Cabinet features a HMC high security tubular locking system, replaceable ball-bearing drawer slides, full-length aluminum drawer pulls and 6" by 2" ...
The ATEQ TPMS Tools VT31 TPMS Sensor Activator and Reader is designed to accurately read tire pressure and 100 percent of TPMS sensors. The VT31 can read sensor ID, pressure, ...
The Kershaw Deadline Knife features a two-toned stainless steel handle with a cold-forged texture for a solid grip. The blade has a gray PVD coating in the grinds and hollows ...
The GEARWRENCH Ultra-Thin Flex-Head Work Lights each feature a dual setting LED main light mounted on a pivoting flex-head that swings open 360 degrees to direct light wherever...
The GEARWRENCH 120XP Ultra-Narrow Swing Arc Ratchets feature 120 positions for every full rotation, allowing them to turn fasteners with a swing arc of as little as three degrees...
The R560 Mobile HD from Rotary Lift is designed for both roadside and workshop service. This tire changer is designed to be easy to use and suitable for closed vans or small workshops...
The Homak 56" H2Pro Roller Cabinet offers 6" by 2" roller bearing casters with a 550 lb capacity per caster. This cabinet also offers a high security tubular locking system, full...
The Lumax Chain Adjustable Oil Filter Wrench, No. LX-1809, is designed to allow for a wide range of filter applications. The cushion grip handle is designed to provide greater...
The Cartek Bear 80-901L 3D Wheel Balancer is designed to handle a variety of wheels with rim diameters from 10" to 28", tire diameters up to 35" and rim widths from 1.5" to 20...
The ITM sensorAID TPMS Tool Software Update v.3.72 offers sensor programming and diagnostic features. The update includes more 2017 model year vehicle application coverage, expanded...
The Mueller-Kueps Wheel Camber Adjuster, No. 514 300/2, allows a single technician to complete wheel alignments. Users place one end of the adjuster on the chassis and the other...
The TPG200 from Bartec is a Tread Depth and Tire Pressure measuring device. The tool measures tread in three places, easily showing the tire profile and remaining tread. The TPG200...
The Lang Tools Wheel Stud Installer and Rethreader Kit, No. 802, works on major domestic and foreign vehicle platforms, including light trucks and SUVs. The installers assure ...
Intercomp's Mechanical Turn Plate can measure wheel angle and features multiple direction X and Y movement, high-strength bearings and lightweight aluminum construction. The Mechanical...
The Ullman Devices SMD Clamp Work Light, No. CL-6SMD, features a durable dual injection grip clamp with a soft grip, 3" clamping jaw. The light features 0.5W SMD LEDs and offers...
The Gaither Tool Co. Bead Bazooka Tommy Gun is a tire inflation tool with a patent-pending 2'' replaceable MIS valve. The grips were redesigned to make them more comfortable to...
The Ken-Tool Rust Hog, No. 20167, is an abrasive tool that removes surface rust and debris on studs and flat mating surfaces of wheels, wheel hubs and brake rotor hats. The Rust...
The Steelman TPMS Tool Kit, No. 99466, offers fast and accurate sensor and service. The 10-pc kit comes complete in blow molded case, and individual components are available separately...
The SP Tools Battery and Welding Cable Crimper, No. 15600, is designed to service battery cables while still attached to the vehicle, oftentimes in tight and confined locations...
The Knipex Tools 11" Extra Long Needle Nose Pliers are designed for strong and flexible gripping of small pipes, screws and round parts in hard-to-reach areas. The Extra Long ...
The GRP Redline 3200 is an economic full size balancer with two dimension automatic data entry and stick-on weight applicator. This balancer has a hidden weight spoke mode, foot...
The heavy-duty Z Creeper from Omega quickly transforms from a standard 40" creeper to a versatile seat. With six full bearing 3" casters and polyurethane wheels the Z Creeper ...
Lista offers their new Foam Drawer Liners that are designed to protect, identify and control tools and equipment. These new liners use a 2-layer insert system; the upper blue ...
