- CDRS761 14.4 V Cordless In-Line Drill: Leading the industry in voltage size (14.4 V), torque output (65 in-lb) and RPM (0-1,350 free speed range), the CDRS761 offers precise control with its nine-position clutch allowing techs to dial in the proper torque. The tool is ideal for drilling out poprivets, holes for exhaust hangers and drilling into sheet metal. A single sleeve keyless metal chuck and over-size paddle-style trigger make for an excellent tool combination.
- CT761AQC 14.4 V 3/8" Drive MicroLithium Quick Change Cordless Impact Wrench: The CT761AQC presents more power in an amazingly compact, lightweight package. Though it features a powerful 60 ft-lb of torque output and 2,500 free speed RPM, this wrench weighs only 2.5 lbs, allowing techs to better maneuver into tight, tough-to-reach spaces. The tool features over-current and thermal protection for the motor and the three, built-in LED lights allow illumination of the work area.
- CTR767 14.4 V 3/8" Drive MicroLithium Cordless Ratchet: The CTR767 offers unprecedented leverage with a 6” extended neck for reaching areas previously accessible only with manual ratchets. The head and extended neck are strong enough to deliver 40 ft-lb of torque output and 157 ft-lb of manual torque. The 14.4 volt 2.0 Ah MicroLithium battery offers plenty of run time. With 275 RPM and a variable speed trigger, the CTR767 makes limited access jobs more manageable.
- CTRQ714 14.4 V Hex Drive MicroLithium Cordless Ratchet: With a tapered head design for greater accessibility, the CTRQ714 offers unrestrained productivity with 35 ft-lb of torque output and 350 free speed RPM. Its hex drive receives multiple size bits, while its small, portable size is great for interior, under-dash, body panel and underhood work.
- CTRS761 14.4 V MicroLithium Cordless Reciprocating Saw: The CTRS761 is a match for intricate cuts in confined areas, yet powerful enough to deliver uncompromising speed at 3,100 strokes per minute. With a LED battery gauge to indicate when a charge is needed, the tool’s MicroLithium battery is charged and ready in only 55 minutes. A dual-action, quick-release chuck is designed to make blade changes quick and easy, and a depth guide adjusts to just the right size.
- CTSR761 1/4" Drive 14.4 V Right Angle Cordless Screwdriver: Perfect for navigating tight spaces, the CTSR761 is ideal for dash work and small engine repair, offering one-handed bit insertion and the ability to handle most standard screwdriver and power bits. The tool packs a punch with 150 in-lb of torque output, and techs can better view the work with the tool’s built-in LED light.
All are available in Snap-on signature red, and the CT761, CTR767, CTRS761 and CTSR761 are also available in green, orange and hi-visibility yellow.
Find out more about the innovative cordless tool offerings from Snap-on, as well as other tools and products, by contacting your participating Snap-on franchisee or other representative, visiting www.snapon.com or calling toll-free 877-SNAPON-4 (877-762-7664).
About Snap-on Tools
Snap-on Tools is a subsidiary of Snap-on Incorporated, a leading global innovator, manufacturer and marketer of tools, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hand and power tools, tool storage, diagnostics software, information and management systems, shop equipment and other solutions for vehicle dealerships and repair centers, as well as for customers in industries, including aviation and aerospace, agriculture, construction, government and military, mining, natural resources, power generation and technical education. Snap-on Tools is one of the largest non-food franchise companies in the world, selling its products and services through franchisee, company-direct, distributor and internet channels. Snap-on Incorporated, which was founded in 1920, is a $3.7 billion, S&P 500 company located in Kenosha, Wisconsin, with operations throughout the world. For additional information, visit www.snapon.com.