Chevy Trans Solenoid Connection
This bulletin applies to 2019 Chevy Corvette, 2019 Silverado, 2018-2019 Camaro, 2018-2019 Colorado and 2018 Express vehicles, equipped with the 8L45 or 8L90 automatic transmission. The electrical connector to the transmission valve body solenoids may not have been fully seated. DTC P2718 or P2720 may set, resulting in the check engine indicator on and the transmission reverting to limp home mode providing limited forward gear selection.
Remove the transmission fluid pan. Locate the two valve body solenoid connectors toward the front of the vehicle. Press each firmly to ensure proper seating. Reinstall the pan and fill with transmission fluid.
About the Author
Information courtesy of Mitchell 1
Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.
Mike MavrigianMike Mavrigian
Motor Age Editor
Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.
