The Fuel and Oil Casing/Canister Wrench Set, No. 23500, from Schley Products is designed to remove oil or diesel fuel filter canisters from any New Holland, Case IH combines and...
The Dodge 4500/5500 Ball Joint Install Adapter, No. 18100-D45, from Schley Products is designed to support the 18100 Ball Joint Press to install the ball joint. The adapter locks...
The 19300 Tire Valve Stem Wrench from Schley Products is designed for work on medium and heavy duty Class 7 and 8 trucks. According to Schley, the wrench was made with precise...
The M16 x 1.5mm CV Joint Driver Bit, No. 20200, from Schley Products is designed to aid in the removal of CV joints on various vehicles, such as Audi, BMW, and VW vehicles. The...
The 1-1/8" Spline Drive Hex Crowfoot Suspension Wrench, No. 20300, from Schley Products is designed to easily fit the tight area inside the airbag mounting bracket. The wrench...
The Heavy Duty On-Truck Pitman Arm Remover, No. 11880A, from Schley Products is engineered to remove pitman arms equipped on F450 and F550 trucks equipped with a ZF steering gear...
The 19880 Medium Duty Pitman Arm Popper from Schley Tools is designed to remove large pitman arms equipped on Isuzu and other medium duty trucks with the steering gear mounted...
The Schley Products Extension Protectors Deluxe Kit, No. 15950, is designed to protect any length 1/2" drive extension should it be otherwise used as a hammer drift. Different...
The Schley Products Extension Protectors Essential Kit, No. 15900, consists of two 1/2” square drive male and female hammers designed to connect to any length 1/2” drive extension...
The Schley Products Cup Kit For 2500/3500 GM Trucks, No. 18100-GM, is designed for 2000 to 2010 GM 2500 and 3500 pickup trucks equipped with steel lower A-arms. The kit includes...
An overview of the SP Tools 11015 Extender Arm for the 11000 Mobile Hydraulic Press Tool. This arm allows technicians to access suspensions components on the vehicle while on ...
SP Tools 11100 manual bushing R&R demo video. This video shows how quick and easy bushing replacement now is with the 11100. Cut considerable time on bushing replacement by not...
This tool allows technicians to press a wide range of bushings, ball joints, and wheel bearings out on the vehicle using our specially designed 18.2 tone ram. This tool is ideally...
The Schley Products High Pressure Ball Joint Press, No. 18100, is designed to remove and reinstall most press-in type ball joints equipped on late model Ford and Dodge full-size...
The Schley Products Updated Low-Profile Pitman Arm Remover, No. 68800A, incorporates improvements that make it similar in design to Schley Product's larger 11880, which utilizes...
The Schley Products Ford Coyote Harmonic Damper Pulley Puller Kit, No. 18350, has been redeveloped to increase the versatility and range of engines and applications. In addition...
The Schley Products 2-Jaw Harmonic Balancer Pulley Puller, No. 17400, is designed for 4-spoke pulleys. The 17400 aids in the removal of the harmonic damper pulleys for various...
The Schley Products Master Harmonic Damper Pulley Puller Kit, No. 18000, accommodates applications including 2018 and later Ford Coyote engines, various models and production ...
The Schley Products 46mm Pitman Arm Torque Adapter, No. 18200, allows technicians to loosen and tighten the large 46mm sector shaft nut without having to remove various sub components...
The SP Tools Sprinter Injector Puller Kit, No. 17600, removes injectors from the 2.7L CDI engine. The kit enables technicians to take the top of the injector off easily with the...
The SP Tools Spring Style Hose Clamp Lock Set, No. 16200, is designed to help technicians save time when removing and servicing engine hoses that are fastened with spring style...
The SP Tools Duramax Injector Cup Puller, No. 16100, is designed to remove the injector cup and sleeve without causing damage to the cup on LB7 Duramax diesel engines for models...
The SP Tools Diesel Exhaust Bung Rethread Kit, No. 16000, is designed to repair EGT sensor bungs. These re-threaders offer a specific geometry that allows them to clean the threads...
The SP Tools Cummins Common Rail Injector Puller, No. 17200, is designed to remove diesel injectors from Dodge Cummins ISBE HPCR 5.9L and 6.7L engines produced from 2003 to current...
The SP Tools Sprinter Injector Puller, No.17600, removes injectors from the 2.7 CDI engine. Due to combustion leaks, corrosion, and wear, the injectors and valve cover may get...
The SP Tools Universal Quick Change Hammer Set, No. 15400, features three different length shafts, a quick change head design, and is made from different materials that are each...
The SP Tools Duramax Fuel Pressure Release Wrench, No. 14400, features a two-piece design to remove the fuel rail pressure release valve sensor on 2011 and later Duramax LML engines...
The SP Tools Mobea Hose Clamp Lock Set, No. 16200, is designed to help technicians save time when removing and servicing engine hoses that are fastened with spring style clamps...
The SP Tools Shouldered Crow Foot Socket Set, No. 15000, incorporates a shoulder that acts as a blind stop to aid in the installation of hard-to-reach flair nuts. This tool is...
The SP Tools Ford Power Stroke Injector Puller Kit, No. 16300, removes diesel injectors on 6.7L Power Stroke engines 2011 and newer. Over time and with many miles on the engine...
The SP Tools Breather Hose Release Tools, No. 14550, are designed for European vehicles that utilize plastic hose locks in the engine, which can easily be damaged if removed improperly...
The Schley Products Sheppard Pitman Arm Remover, No. 14900, is designed for servicing Sheppard steering boxes equipped in large commercial trucks. Forged from alloy steel and ...
The SP Tools Injector Puller Kit, No. 16400, is designed to remove diesel injectors from 2011 to 2016 GM vehicles equipped with the LML Duramax engine. Over time and with many...
The SP Tools Universal 3 Leg Fuel Pump Spanner Wrench, No. T1701, is designed to aid in removing and installing of the fuel pump’s retaining ring that holds the fuel pump module...
The SP Tools Harley-Davidson Clutch Adjustment Tool, No. 14500, is designed with a 7/32” hex driver that adjusts the clutch on all Harley-Davidson motorcycles from 1983 to current...
The Matco Tools VW Lug Nut Cap Remover, No. VWLNCR, allows the technician to remove the lug caps on a VW and store them neatly until the time to reinstall them. The end tip has...
The SP Tools Diesel DEF Tube Release Forks, No. 15200, are used by technicians servicing modern diesel powered Ford and Dodge trucks. Newer vehicles are equipped with diesel exhaust...
The Tech Tools Universal Broken Stud Drill Guide, No. T1702, from Schley Products, is designed to handle a broken stud during an engine service. The Exhaust Stud Drill Fixture...
The SP Tools Sensor Socket Set, No.15300-EGT, is designed to remove exhaust temperature sensors on most modern automobiles. Because of heat cycles and the corrosive environment...
The SP Tools Pneumatic U-Joint C-Clip Remover, No. 14200, was developed for Ford, GM, Dodge, Jeep, International and any other vehicle that uses a U-Joint with a C-Clip retainer...
The SP Tools Toyota Parking Brake Tool, No. 14150, was designed to enable technicians to work safer and more efficiently when servicing the brakes on 2000 model year and newer...
The SP Tools Toyota Serpentine Belt Wrench, No. 15800, is designed for use on Toyotas and Scions with 2GR-FE, 2AZ-FE, 2AR-FE, 1AR-FE and other engines. This double-ended wrench...
The SP Tools Toyota Water Pump Pulley Wrench, No. 13500, is designed to assist technicians in the removal of the water pump pulley bolts on 2.4L 2AZ engines, which are used in...
The SP Tools Valve Spring Lock Down Tool, No. 91400B-LDT, has been developed as an upgraded accessory for SP Tool's popular Updated Universal OHC Valve Spring Compressor (No. ...
The SP Tools Battery and Welding Cable Crimper, No. 15600, is designed to service battery cables while still attached to the vehicle, oftentimes in tight and confined locations...
The SP Tools Voss Type 3/8" Fuel Line Disconnect Tool Set, No. 13250, is designed to release the fuel line connectors on Cummins and International engines. The 13250 works on ...
The Schley Products/SP Tools Bosch Direct Injection Injector Puller Kit, No. 14000, features a 1-lb slide hammer weight to help break apart stuck injectors. The design of this...
The SP Tools Pitman Arm Remover, No. 11880, helps technicians safely and efficiently remove large Pitman Arms on 3/4- to 1-ton pickup trucks. Constructed of large, forged components...
The SP Tools/Schley Products BMW Injector Line Socket Set, No. 13400, is designed for BMW’s with N54, N63 and S63 engines. With limited space in the engine compartment and injectors...
The SP Tools/Schley Products Dodge Harmonic Damper Pulley Puller, No. 13450, aids in the removal of the harmonic damper pulleys found on the Dodge 5.7L and 3.5L engines. The space...
The Schley Products Duramax LLY, LBZ, and LMM Injector Puller Kit, No. 13300, helps technicians remove the diesel injectors from GM vehicles produced from 2005 to 2010 with an...
The SP Tools Turbo Arm Puller, No. 12250, for 6.4L Ford Diesel vehicles has been designed to remove the actuator link rod from the arm on the turbo of the 2008 to 2010 6.4L Ford...
The Schley/SP Tools Cam Gear Holder, No. 12100, helps technicians avoid difficulties when removing and installing a cam gear bolt due to extreme breakaway and high torque requirements...
The Schley/SP Tools Duramax LB7 Injector Puller Kit, No. 11700, has been designed to remove the diesel injectors from GM vehicles produced from 2001 to 2004 with an LB7 Duramax...
The Schley/SP Tools BMW N54 N55 T-60 Torx Serpentine Belt Tensioner Tool, No. 12500, allows technicians to access most T-60 Torx belt tensioners on BMW N54 and N55 engines found...
The SP Tools VW/Audi Diesel Injector Puller, No. 12200, is designed to easily remove diesel injectors from 1996 and newer VW and Audi vehicles sold in the United States. The TDI...
The SP Tools All-in-one Fluid Stopper 2-pc Set, No. 13700, allows technicians to stop fluid draining from various lines found on vehicles, heavy duty trucks and equipment. These...
When replacing the fuel filter on a 2001 to current GM Duramax light duty truck the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the ...
The unique design of the SP Tools Extra Long Air Hammer Pneumatic Drifts, No. 11600, allows users to remove long bolts that have become frozen in place due to rust and time, including...
SP Tools’ Extender Arm for 11000A and 11000 hydraulic presses, No. 11015, is a new attachment for the company's popular Mobile Hydraulic Press System that enables techs to...
The Schley Duramax Turbo Vane Position Sensor Socket, No. 12400, has been designed to remove the turbo vane position sensor on late 2004 to present GM medium duty trucks with ...
SP Tools' BMW Injector Puller, No. 11800, allows for the easy removal of injectors on all BMWs with direct injection. On in line 6 cylinder engines the tool allows the user to...
The Ford Power Stroke 6.7L Diesel Injector Socket, No. 11400, from SP Tools comes as a 17mm 12 point flare nut socket that gives the technician the ability to remove various injector...
The SP Tools' Honda/Acura Serpentine Belt Tensioner Tool No. 10950HO was designed to reach down through the engine compartment in areas not easily accessed with conventional tools...
SP Tools' Honda/Acura Serpentine Belt Tensioner Tool, No. 68170, has been re-engineered to rotate the older 14 mm and newer 19mm hex style serpentine belts tensioners. The 14mm...
The SP Tools Manual Bushing R&R Tool Set, No. 11100, allows techs to service a wide range of bushings without removing components from the vehicle. Due to the awkward dimensions...
SP Tools/Schley Products Inc. offers the Small Pin Cam Gear Holder, No. 11500. The wrench is designed with small diameter grooved pins to allow access to small hole cam gears....
SP Tools/Schley Products Inc. offers the BMW/Sprinter Van Offset Pulley Holder No. 11250. The tool allows technicians to hold the water pump pulley securely while the No. 62100...
The SP Tools' Hub Bearing Removers were designed to remove the hub bearings that are rusted to the steering knuckle, without removing the steering knuckle from the vehicle or ...
SP Tools offers the 11000A Mobile Hydraulic Press Tool with Air Powered Hydraulic Pump. This tool saves time by not removing components and using a press. The 11000A allows quick...
In the past, to work on the Lexus applications listed, the engine support bracket needed to be removed to access the lower part of the engine. A jack needed to be in place to ...
The SP Tools 68600A Air Hammer Ball Joint R&R Tool saves time by utilizing an air hammer to remove and replace ball joints. Save about an hour of labor time on many Honda/Acura...
The SP Tools Mobile Hydraulic Press Kit, No. 11000, allows technicians to service a wide range of bushings, wheel bearings and ball joints, while on the vehicle. This complete...
The SP Tools Mobile Hydraulic Press Tool, No. 11000, allows technicians to service a wide range of bushings, wheel bearings and ball joints, while on the vehicle. This complete...
The SP Tools' Toyota Top Access Serpentine Belt Tensioner Wrench, No. 10200, allows technicians to access the tensioner from the topside of the engine, instead of the current ...
The SP Tools' Honda/Acura Air Hammer Ball Joint R&R Tool, No. 68600, is designed to remove and install lower ball joints on the car versus removing the steering knuckle and using...
SP Tools' Spring Compressor Adapter for 24mm Valve Spring Retainers, No. 91450, was designed to better aide the technician when removing and installing valve springs. Used in ...
SP Tools' GM Duramax Flywheel Lock, No. 69250, works on 2001 and later 6.6L Duramax diesel trucks. Features: Saves time, no need to remove starter motor. Holds the engine in place...
SP Tools' Universal OHC Valve Spring Compressor, No. 91400B, is a "must-have" for the Lexus Valve Spring Safety Recall. The compressor eliminates the need to remove engine due...
SP Tools' Volvo Fuel Pump Socket, No. 69800, is designed to remove the left and right fuel pump retaining nuts on all late-model Volvos, without damaging the plastic retaining...
SP Tools' VW/Audi Timing Belt Tensioner Release Tool, No. 67650, compresses the hydraulic timing belt tensioner when servicing the water pump. This tool holds the timing belt ...
The Ripped Spark Plug Boot Remover, No. 68450, from SP Tools easily removes ripped and stuck-on spark plug boots where there is no access to grab the boot. The tool slides into...
The BMW T60 Torx Serpentine Belt Tensioner Tool, No. 68200, from SP Tools gives access to the T60 belt tensioner found on BMW 135, 335, 535 and all other models using the N54 ...
Back in the mid ’80s, cars started showing up at repair shops with engine systems that were computer controlled and the technician couldn’t even adjust an idle.
SP Tools' OrganizeAIR, No. 67900, has a strong magnetic base which holds it in place, while holding up to six tools at a time. The OrganizeAIR will keep air chucks, blowguns and...
With SP Tools' GM Power-Steering Pump Seal Removal and Installation Tool, No. 68500A, there's no need to replace the entire pump due to a leaking seal. This tool works on hundreds...
SP Tools developed the 62020 Fan Clutch Wrench Set with Rack for Chrysler, Ford, GM, Land Rover and Mazda vehicles, especially for bolt-on pulleys. This two-piece set does 98 ...
The SP Tools' Cam Seal Remover and Installer tool, No. 65510, allows proper camshaft seal removal and installation on most Toyota and Lexus V6 engines. Made from heat-treated ...
The 67700 Magnetic Washer Remover from SP Tools has small magnets that are designed to aid in the removal of hard to reach washers that are around most types of studs. This dual...
The SP Tools 65130 Honda/Acura Bushing X-Tractor easily and quickly remove and install trailing arm bushing in 15 minutes per side versus the Honda factory "book" time of 1.8 ...
SP Tools' Honda S2000 Clutch Alignment Tool, No. 68350, aids in the alignment of the clutch disc to the flywheel and cover. The knurled end allows users to remove the tool very...
SP Tools designed the Shielded Oxygen Sensor Socket, No. 67750, for shielded oxygen sensors currently found on Toyota and Lexus vehicles. This tool features a 12-pt. double hex...
SP Tools' Shielded Oxygen Sensor Socket, No. 66750A, features a 12-pt. double hex enabling techs twice the number of "clock angle" attachment positions versus a 6-pt. design. ...
With this increased seal and the location of the spark plug boot, SP Tools developed the VW/Audi Spark Plug Boot Puller and Installer, No. 98180A, to access and remove the spark...
SP Tools introduces the Serpentine, V-Belt and Timing Belt Installation Assist specialty tool, No. 94170A, to help techs hold belts more securely. The updated three-pin design...
The Bendix-type Air Brake/Treadle Valve Holding Tool, No. 67400, from SP Tools is a specially designed holding tool, manufactured to hold two treadle valves so that the attaching...
SP Tool's V6 Cam Seal Remover, No. 65500, with patent-pending press and pull cup design, allows proper camshaft seal removal on most Toyota and Lexus V6 engines. Made from heat...
At this year’s Matco tool fair, more than 3,000 distributors, vendors and guests from all over the country stopped by to check out Matco’s new and exclusive offerings.
This specially designed holding tool from SP Tools was manufactured to hold two treadle valves so that the attaching air pressure fittings can be exchanged from the old valve ...
SP Tools’ 24mm flare nut wrench, No. 66150, is designed to slide back into the recessed area of the cylinder head, where the fuel line retainer screws into the head. The special...
Schley introduces their G.M. Harmonic Damper Holding Tool, part #YA6280, for help in the removal and installation of the crank bolt on 1997 and later Gen III 5.7-liter V-8 engines...
The SP Tools Universal Harmonic Damper Pulley Puller, No. 64900, has been updated and now works on most late model Ford engines as well as many Chrysler and GM engines. The patented...
Schley designed the Universal Long Reach Spark Plug Boot Puller to help with the removal of spark plug wires. This new tool incorporates a unique swivel action that lets you reach...
Schley Products offers their Matco MST6380 Cam Seal Installer for Mazda, Nissan, Infinity, Toyota and Lexus vehicles. This new product installs the cam seals in 4 and 6 cylinder...
Hinging On Access For Success Schley Products recently unveiled the GM Door Hinge Bushing Installer to facilitate the installation of replacement silicon bronze bushings on GM...
Valve-spring compressor tool features multi-point adjustability An updated tool from Schley Products, the Universal OHC Valve Spring Compressor No. 91400A works whether the cylinder...
New from Schley Products is their 64300 harmonic damper pulley holding tool for removing and installing the crank bolt on Lexus and Toyota engines. This tool holds the damper ...
Honda/Acura damper pulley tool gets update From Schley Products comes this updated Honda/Acura 4" Offset Damper Pulley Holding Tool No. 60100A with new 4" offset design that works...
Schley designs for Toyota Schley Products Inc. introduces the Shielded Oxygen Sensor Socket, No. 66750, which is designed to repair newer shielded oxygen sensors in Toyota and...
