Owners of 2010-2017 Chevy Equinox vehicles may comment about a loss of power steering assist, a hard-to-steer condition and/or a Service Power Steering message in the DIC (driver information center).
Install a ground point label as shown. This will provide a ground location for future jump starts.
Owners of 2010-2017 Chevy Equinox vehicles may comment about a loss of power steering assist, a hard-to-steer condition and/or a Service Power Steering message in the DIC (driver information center). This may be due to a blown/failed power steering fuse, which could be a result of improper jump starting.
Locate the electronic power steering fuse and check to determine if the fuse is open (check for continuity using a digital multimeter or continuity tester. If blown, replace the fuse and tighten the fuse fasteners to 44 in-lb.
After the fuse is replaced, install an electrical ground point label, GM P/N 10384767 in the location shown in the accompanying photo.
Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.
