TSBs

Infiniti Issue With ABS Codes

Sept. 20, 2021

This bulletin applies to 2014-2017 Infiniti QX60 vehicles as well as a number of additional Infiniti models.

This bulletin applies to 2014-2017 Infiniti QX60 vehicles as well as a number of additional Infiniti models.

When diagnosing for DTC C1130 (engine signal), note that any P-codes must be noted and repaired as needed before proceeding further. DTC C1130 is an ABS DTC that indicates an output signal of the ECM is not recognized. Absent or incorrect ECM signals that are indicated by corresponding P-codes may trigger C1130 in the ABS control unit. Some vehicle features that can be affected by absent or incorrect ECM signals are forward emergency braking (FEB), intelligent cruise control (ICC) and VDC/ABS/TCB.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.