TSBs

Stuck Brake Pedal for Cadillac

Jan. 13, 2022

In “rare cases,” the brake pedal might not raise back up or is stuck down after a normal braking event on 2010-2015 Cadillac SRX or 2013-2015 XTS vehicles.

Information courtesy of Mitchell 1

Mike Mavrigian

In “rare cases,” the brake pedal might not raise back up or is stuck down after a normal braking event on 2010-2015 Cadillac SRX or 2013-2015 XTS vehicles.

The condition may occur in high temperature and humidity conditions and may not be repeatable. The brake lights will remain on and the brakes may drag after the pedal is released.

A pop, click or snap noise may be heard when the pedal is applied or released. If the concern is intermittent, allow the vehicle to idle for 30 minutes on max heat and floor mode to try to induce the concern. The condition may be due to a bind in the brake pedal pivot bushing. Replace the brake pedal arm. Be sure to use the two new retaining clips that are included with the new arm.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.