TSBs

Durango Could Have Faulty Cam Sensor

Aug. 2, 2022

2014 Dodge Durango vehicles equipped with a 3.2L or 3.6L engine may experience intermittent, extended cranking and long cranking times. The Bank 1 camshaft position sensor may be the cause.

Information courtesy of Mitchell 1

Mike Mavrigian

2014 Dodge Durango vehicles equipped with a 3.2L or 3.6L engine may experience intermittent, extended cranking and long cranking times. The Bank 1 camshaft position sensor may be the cause.

Remove the engine cover and locate the Bank 1 camshaft position sensor, which can be found in the top rear of the valve cover. Inspect the sensor serial number on top of the sensor.

If the serial number starts with the letter "D," replace the sensor with P/N 05149141AF.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.