This bulletin applies to 2011 and later Porsche Cayenne vehicles equipped with a 3.6L engine. The oil level warning “Above Max” may be displayed in the instrument cluster.
This bulletin applies to 2011 and later Porsche Cayenne vehicles equipped with a 3.6L engine. The oil level warning “Above Max” may be displayed in the instrument cluster.
The following procedure is recommended to ensure that the engine oil level is correct when adjusting the oil level, performing maintenance or repairs.
By following this procedure, the engine oil level display will be displayed as completely full, but still provide an allowance for fuel or moisture dilution of the engine oil over time. If the engine oil is filled beyond this level, the warning “Above max” may be displayed intermittently.
1. Run the engine until engine temperature is reached at 194 degrees Fahrenheit (90 degrees Celsius).
2. Turn the engine off.
3. Allow 5 minutes for the oil to drain back into the oil pan.
4. Using the PIWIS Tester II, check the engine oil level. It is recommended to set the displayed oil level to 70 mm (+/- 1 mm).
Gain expert insight into today’s evaporative emission systems and why OE-matched EVAP components are crucial for performance and compliance. See how Standard® delivers precision...
Hear what senior autotechs have to say about the AIRCAT Nitrocat 1056-XL compact impact wrench. They’ll provide their reviews on tools they own and have been using every day on...
