Some 6.0L equipped 2004 Ford F-350 Super Duty trucks built between 9-29-2003 and 4-28-2004 may exhibit low rpm, buck/jerk, miss and/or stumble after deceleration down a long grade with the cruise control engaged.
Some 6.0L equipped 2004 Ford F-350 Super Duty trucks built between 9-29-2003 and 4-28-2004 may exhibit low rpm, buck/jerk, miss and/or stumble after deceleration down a long grade with the cruise control engaged.
To address this concern, reprogram the powertrain control module (PCM), fuel injection control module (FICM) and transmission control module (TCM) to the latest calibration using WDS release B31.11 or higher. Calibration files may also be obtained at www.motorcraft.com.
To update calibrations using WDS, select Module Programming>Module Reprogramming>PCM and ensure that the vehicle is properly identified. This will enable WDS to update the FICM, PCM and TCM with the appropriate calibration.
This calibration update also includes improvements for the electronic throttle control (ETC) pedal, fuel pump diagnostics and enhancements to prevent false DTCs when using the WDS data logger output state control function.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
