Some owners of 2011-2014 Chevy Volt vehicles may comment that the vehicle did not fully complete a charge or that charging was interrupted. A MIL may also be illuminated.
Some owners of 2011-2014 Chevy Volt vehicles may comment that the vehicle did not fully complete a charge or that charging was interrupted. A MIL may also be illuminated.
Technicians may find DTCs P1E00 set in the ECM and P0D3E or P0D3F are set in the HPCM2. The condition is known to occur with certain models of EVSEs (charge cords or charge stations) such as the Bosch Power Xpress (formerly SPX) and GE WattStation. This is due to an interaction of the diagnostics between the vehicle and the EVSE.
A P0D3F may also set if the vehicle was charging during a thunderstorm and the voltage dropped from the electrical grid during charging.
A new software package was released for the K57 Battery Charger Control Module (BCCM) to address this concern. Flash in the latest calibration for the BCCM.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!