This bulletin applies to 2012 Dodge Durango vehicles built after April 9, 2012, and before June 3, 2012. A thumping noise may be heard from the front wheels while braking.
This bulletin applies to 2012 Dodge Durango vehicles built after April 9, 2012, and before June 3, 2012. A thumping noise may be heard from the front wheels while braking.
1. Raise the vehicle and inspect the right and left brake rotors.
2. Do the rotors feature a one-line groove on the outer edge? If so, proceed to Step 2.Do you have an approved PSE on-car brake lathe? If yes, proceed to Step 3. If no, proceed to Step 4.
3. Using a PSE approved on-vehicle brake lathe, lightly resurface both front rotors.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!