Mayhew Steel Products, Inc. introduced 10 new hammerless tools to their product line. These spring-powered tools serve as an alternative to mark, cut, punch, start, and/or set without the need for a hammer. These tools are ideal for use on wood or metal surfaces delivering up to 3,500 lbs of striking force. Users place the tool directly on the work surface, pull back the spring, and release – gaining precision and accuracy while avoiding mis-hits or glancing blows.
All tools in the Mayhew hammerless tools line are made in the U.S. and backed by a lifetime warranty. The individual tool details are as follows:
Center Punch & 2/32” Nail Set, No. 17351
- Center Punch marks, indents, and punches most mild steel while the Nail Set countersinks finish nails and brads into wood surfaces.
Nail Master, No. 17352
- This includes the Nail Starter and Nail Set. Nail Starter starts and drives #2 finished nails and brads while the Nail Set countersinks finish nails and brads into wood surfaces.
2/32” & 3/32” Nail Set, No. 17353
- Nail Set sets finish nails and brads into wood surfaces.
Center Punch & Prick Punch, No. 17354
- Center Punch marks, indents, and punches most mild steel while the Prick Punch is ideal when marking and slight indentations are needed.
5/16” Cold Chisel & 5/16” Hammer, No. 17355
- Cold Chisel cuts rivet heads, mild steel screws, and copper wire. The Hammer drives pins, nails, plugs, and dowels, as well as flattens uneven metal surfaces.
Punch & Cold Chisel, No. 17356
- Cold Chisel cuts rivet heads, mild steel screws, and copper wire and the Center Punch (which can be re-sharpened) marks, indents, and punches most mild steel.
Self-Centering Center Punch, No. 17357
- The spring powered hardened steel point finds center for brackets, hinges, and mounting hardware – serving as a transfer punch for layouts.
5/16” Wood Chisel & 5/16” Hammer, No. 17358
- Wood Chisel carves out grooves in wood and other soft materials while the Hammer drives pins, nails, plugs, and dowels, as well as flattens uneven metal surfaces.
5/16” Wood Chisel, No. 17359
- Wood Chisel carves out grooves in wood and other soft materials.
5/16” Cold Chisel, No. 17360
- Cold Chisel cuts rivet heads, mild steel screws, and copper wire.