Tech Tip: How to use the Yellow Jacket Mantooth Kit

May 28, 2020
When using the Yellow Jacket Mantooth Kit make sure to set your elevation.
Jim

When using the Yellow Jacket Mantooth Kit make sure to set your elevation, especially if your location is at 2,000' or higher as this will affect your pressure readings. Then zero the transducers before connection to the system to get the most accurate readings. This is done in the free Mantooth app for iOS or Android. If you assign a temperature or pressure incorrectly, you do not need to switch the connections, just reassign the readings from the readings screen.

Information provided by Ritchie Engineering Co.

Sponsored Recommendations

Snap-on Training: ADAS Level 2 - Component Testing

The second video for Snap-on's comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Intro to ADAS

Snap-on's training video provides a comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Guided Component Tests Level 2

The second video for Snap-on's comprehensive overview of Guided Component Tests, covering the fundamental concepts essential for diagnostic procedures.

Snap-on Training: Data Bus Testing and Diagnosis Part 1

Learn the basics of vehicle data buses and their diagnosis with Snap-on's Jason Gabrenas.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!