Tech Tip: Four simple steps to fix cooling system leaks

Oct. 27, 2017
Begin by performing a full inspection of the radiator.

It’s common for a cooling system to develop leaks and drips under normal use. As with all under-the-hood leaks, it’s important to take action as soon as a coolant leak is detected before it becomes a major problem. At the first sign of leaking coolant or low coolant levels, here are four simple steps to fix your customer’s radiator leak quickly, and get them back on the road.

1. Inspect the radiator: Do a visual check to spot where the leak is — in the radiator itself, at the radiator tank interface, in the hoses or at the hose connections — to decide how to best address it. Caution: always exercise extreme caution when inspecting a radiator. Coolant can be hot and under pressure, and it can burn your skin or get in your eyes. Wear safety glasses and protective clothing, and always inspect when the engine is cold and turned off.

2. Tighten all connections: Sometimes a coolant leak may simply be the result of a loose or rusted clamp. Where possible, tighten all clamps and replace any that are broken or too rusty to tighten. Also check the radiator cap: the pressure-relief springs can wear out over time and allow coolant to leak under pressure.

3. Perform a coolant flush: A coolant flush will help remove any debris or dirty, gummy coolant in the system that can hide leaks. Flush and re-inspect the radiator for any new leaks. Fresh coolant will also help keep your customer’s engine running at the right temperature.

4. Install a proven stop-leak solution: If the leak remains, help your customer choose an appropriate chemical stop leak solution based on the size of the leak and the type of radiator in the vehicle. For example, Bar’s Leaks offers more than a dozen radiator stop-leak products, engineered for the type and nature of the radiator — copper, aluminum, plastic, etc. Most leaks stop immediately after installation. They are easy to use with all types and colors of antifreeze and/or water, and provide a quick and permanent solution to a radiator coolant leak. Simply follow the directions on the product and in as little as 15 minutes, your customer is back on the road.

Information provided by: Bar's Leaks

Sponsored Recommendations

Access Carside OEM Repair Data with MOTOR TruSpeed

Now available on all Autel MaxiSYS Ultra Series tools, MOTOR TruSpeed Repair delivers expanded OEM service and repair data within days of being published by

ADAS Case Study: From 10 Calibrations a Month to Over 10 A Day

Originally published by Vehicle Service Pros, March 26, 2024

Ask The Expert: The Basics & Benefits of Bringing ADAS Calibrations In-house

Originally published by Vehicle Service Pros, March 26, 2024

Simplifying the ADAS Opportunity

Originally published by Body Shop Business, February 12, 2024

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!