Jeep Gladiator May be a Clunker

Sept. 30, 2020

 

This bulletin applies to 2020 Jeep Gladiator vehicles where the customer experiences a loud scraping, bump or clunk noise from the front suspension when going over bumps. 

This bulletin applies to 2020 Jeep Gladiator vehicles where the customer experiences a loud scraping, bump or clunk noise from the front suspension when going over bumps. 

Both front coil springs should be checked, as a defective spring may have been installed. 

Using a 5 mm Allen wrench as a gauge, inspect the coil spring inner bows between the fourth and fifth coil from the bottom, at curb height. 

Insert the Allen wrench between the inside bow of the spring and the shock’s jounce cup. The wrench should be able to pass completely around the coil bow without touching the jounce cup. 

If clearance is too tight, replace that coil spring.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of  specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!