A new software update is available for Autel key programming tool models IM608, IM508, IM600 and IM100.
Autel Intelligent Technology Corp. Ltd. says some functions may require the XP400, which is not included with the IM100 and IM508.
Tools with an active software subscription can download the update.
Descriptions of the new features in the software update follow.
- Adds the K-line EIS erase and personalization function for the following 19 Mercedes models:W203(1J35D), W203(4J74Y), W203(HC12), W203(ST12), W215(1J35D), W215(4J74Y), W215(ST12), W220(1J35D), W220(4J74Y), W220(HC12), W220(ST12), W230(4J74Y), W230(HC12), W230(ST12), W463(ST12), W639(0L02M), W639(1J35D), W639(1L02M), W639(4J74Y).
- Mercedes OBD trunk-opening function for C-Class 204 Chassis, CLK-Class 204 Chassis, E-Class 212 Chassis, S-Class 221 Chassis.
- Smart key password reading function and key deletion/programming function for the following models: Grand Cherokee (2018-2019), Wrangler (2018-2019).
- Ford Transit PIN Bypass (2014-2018).
BMW
- Immobilizer password reading function for BMW CAS4 by OBD.
- ISN reading & writing function for B48B58 engine.
- Key programming function for EWS immobilizer.
- Immobilizer key reading function by OBD for BMW CAS4.
- ISN reading/writing function for B48B58 engine.
VW Audi
- Adds the Advanced Mode function for IM100 and IM508.
- A6/Q7/Allroad transmission replacement function.
- IMMO ON/OFF function for VW 4th generation EDC15, EDC16, ME7 engine.
- Immobilizer horn ON/OFF function for VW immo V.
- ME17/EDC17/MED17 data processing tool.
For more information, visit www.auteltech.com.
