For technicians working on most Subaru® vehicles, these products from Snap-on® will increase productivity and save time on the job.
Snap-on® BJR1 & BJR2 Ball Joint Removers for Subaru® Vehicles – The BJR1 & BJR2 increase productivity and saves technicians valuable time on the job with faster, safer ball joint removal. They easily remove stubborn ball joints that are heavily corroded. The puller screw threads onto the ball joint stem and the cup rests against the steering knuckle. The 3/4" hex on the puller screw can be driven by hand or with an impact gun to easily remove the ball joint. The industrial finish helps protect against corrosion. The BJR1 remover is designed for use on Subaru® 2003-2006 Baja®, 1998-2020 Forester®, 1993-2020 Impreza®, 1990-2020 Legacy and 2000-2020 Outback®, 2016-2020 Crosstrek® models. The BJR2 remover is designed for use on 2006-2014 Subaru® Tribeca® , 2018-2020 Ascent® models.
Snap-on® BJP1-BKS pc. BJP1 Subaru® Bushing Kit – For use in conjunction with the BJP1 Master Kit, this add-on makes it possible to remove and install compliance bushings without the need to completely remove the vehicle control arm. The bushing kit pieces are all precision machined from special steel with higher alloy content, heat treated and coated with an industrial finish that make them the go-to for the long haul.
Snap-on® S6214A 1/2" Drive 14 mm Subaru® Head Bolt Socket – The 1/2" drive configuration of the S6214A allows for use of proper capacity torque wrenches that are required for setting specified torque on cylinder head bolts. Overall socket length is optimized to clear valve train components and maximizes working space between the cylinder head and uni-body frame. Technicians can use proper capacity torque wrenches while the engine is still in the chassis. It is precision machined from special steel with higher alloy content and heat-treated for optimum strength and durability. The S6214A is designed for cylinder head bolts in a majority of Subaru® vehicles (2005 and newer) with horizontally opposed flat boxer engines.
Snap-on® STX70E 1/2" Drive TORX® T70 Standard Bit Socket Driver – The STX70E high strength bit is designed specifically to service front differential drain plugs on Subaru® Legacy, Impreza® and 2003 and later Forester® vehicles. It features a pinless bit with no roll pin, which provides a solid fit and is easily replaced when the job calls for it. The 3.50" STX70E is built to last with no hole to collect dirt and build up.
To find out more about these Subaru® products and other Snap-on® tools and products, contact your participating Snap-on franchisee or other representative, visit www.snapon.com or call toll-free 877-SNAPON-4 (877-762-7664).
About Snap-on Tools
Snap-on Tools is a subsidiary of Snap-on Incorporated, a leading global innovator, manufacturer and marketer of tools, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hand and power tools, tool storage, diagnostics software, information and management systems, shop equipment and other solutions for vehicle dealerships and repair centers, as well as for customers in industries, including aviation and aerospace, agriculture, construction, government and military, mining, natural resources, power generation and technical education. Snap-on Tools is one of the largest non-food franchise companies in the world, selling its products and services through franchisee, company-direct, distributor and internet channels. Snap-on Incorporated, which was founded in 1920, is a $3.7 billion, S&P 500 company located in Kenosha, Wisconsin, with operations throughout the world. For additional information, visit www.snapon.com.
