Technician complaint No. 13: I’m too tall to work under this lift. Technician complaint No. 26: It’s really hard to reach the OEM-recommended lifting points on this vehicle.
With these challenges in mind, BendPak has added three new models to its XPR family of two-post lifts. The extra-tall XPR-10XLS symmetrical and XPR-10AXLS asymmetrical lifts provide more under-lift clearance to help reduce neck and back pain in taller technicians, while the XPR-12C-LTA’s three-stage telescoping arms help reach challenging lifting points on trucks and other vehicles with long wheelbases.
“Because no two jobs – or technicians – are alike, our XPR Series of two-post lifts offers a range of configurations to help customers choose what works best for their specific shops instead of relying on ‘one size kind of fits all,’” says Jordan Garcia, BendPak strategic account representative. “Tall technicians will appreciate being able to work at full height with an XPR-10XLS or XPR-10AXLS instead of bending under a lift for hours at a time. And techs who’ve struggled to balance a truck on a lift with short arms will waste less time spotting with the new XPR-12C-LTA.”
XPR-10AXLS and XPR-10XLS
The BendPak XPR-10AXLS and XPR-10XLS are designed with an extended working height that’s ideal for taller technicians. These two-post lifts feature a massive cylinder stroke that raises vehicles 75 inches to 80 inches – that’s at least 6 inches higher than standard BendPak two-post lifts go.
Each lift has a 10,000 lb. lifting capacity and features an oversized 59-inch tall carriage for superior strength. The lifts are designed with a single-point safety release and safety locks spaced every 3 inches in each column.
The XPR-10AXLS is an asymmetrical lift with triple-telescoping front arms and two-stage rear arms that offer greater arm sweep so they can reach more pick-up points especially those that can be hard-to-reach on vehicles with unibody construction, wide bodies or narrow configurations.
The symmetrical XPR-10XLS is designed to provide clear space for opening doors on cars, but can also be used to service trucks and SUVs with an optional extension kit or available Low-Pro™ arms. When BendPak’s exclusive Low-Pro arms extend, the top of the arm is closer to ground level than other arm designs, helping them slide under vehicles with low ground clearance.
XPR-12CL-LTA
The BendPak XPR-12CL-LTA 12,000-pound capacity truck lift features three-stage telescoping front and rear arms with a 72-inch maximum reach that’s almost 25 percent greater than those on BendPak’sstandard XPR-12CL two-post lifts. These super-sized arms are designed to reach OEM lifting points and maintain a vehicle’s center of balance on even the most challenging wheelbases. To ensure long service life, the lift’s carriage has been strengthened to support the longer arms, oversized cable sheaves reduce cable fatigue and the baseplates are oversized A36 steel.
All XPR Series lifts have a single-point lock release and safety locks every 3 inches in each column. They are clear-floor lifts to make it easy to roll tools and equipment under the vehicle being serviced, with the equalization beam and a padded safety shutoff bar overhead. The XPR-10AXLS, XPR-10SLS and XPR-12CL-LTA have been third-party tested and are ALI-certified to meet industry safety and performance standards.
For more information about the XPR two-post lift family, call (805) 933-9970 or visit bendpak.com/car-lifts/two-post-lifts. You can also connect with the company through Twitter, twitter.com/bendpak, Instagram, Instagram.com/bendpak or YouTube youtube.com/user/BendPakRanger.
About BendPak
BendPak Inc. is a global manufacturer of vehicle service equipment sold under the trademarked brands BendPak®, Ranger®, Autostacker®, QuickJack®, GrandPrix®, JackPak®, MaxJax® and Dannmar®. Its collective range of products includes car lifts, parking lifts, pipe benders, air compressors, tire changers, wheel balancers, wheel aligners, brake lathes and other garage equipment.
