In Focus: Yellow Jacket SuperEvac PLUS II Vacuum Pump

July 30, 2021
The SuperEvac PLUS II Vacuum Pump is used for A/C system evacuation to ensure that the system is tight, and that non-condensable gases have been removed from the system prior to charging.

Application

The Yellow Jacket SuperEvac PLUS II Vacuum Pump, No. 93714, is used for A/C system evacuation to ensure that the system is tight, and that non-condensable gases have been removed from the system prior to charging. 

Features and benefits

  • Provides fast and effective evacuation of mobile A/C systems
  • The 1/2 Horsepower Brushless DC (BLDC) motors are lightweight and provide high torque and efficiency, even in extreme environmental conditions
  • Additional safety features allow for its use on both R-134a and R-1234YF systems, no need for separate vacuum pumps
  • Attaching the 37936 adapter to the pump intake provides both 1/2” ACME and 1/2” LH ACME fittings standard for R-134a and R-1234YF service hoses, simplifying connections and changeovers
  • The integrated isolation valve isolates the pump from the system during vacuum hold testing
  • Rough vacuum gauge provides an indication of evacuation status  

Selling points 

  • Since evacuation is one of the most critical and time-consuming processes of mobile A/C system service, it is important to have a vacuum pump that is fast and reliable.
  • This vacuum pump is loaded with features that assure effective system evacuation on every job, says the company.
  • The lightweight and high torque motor coupled with the robust 2-stage rotary vane cartridge provide optimal performance. 

Origin

The SuperEvac PLUS II Vacuum Pump is an enhanced version of the Yellow Jacket SuperEvac Vacuum Pump. It incorporates the performance and robustness of the legacy versions with valuable new features that today’s technicians are looking for. The lightweight motor and integrated shoulder strap make it easy to transport between jobs. 

Manufacturing/engineering specifications 

The SuperEvac PLUS II Vacuum Pump is made in the U.S.A. The pump castings are made from high-strength aluminum and the 1/2 HP BLDC motor provides the torque and efficiency needed for every job. It can achieve a vacuum level of 15 microns or better and weighs less than 25 lbs.

 Storage and display

The SuperEvac PLUS II Vacuum Pump is shipped in a corrugated carton, one pump per package. The rubber feet provide stability when being transported in a service vehicle. 

Suggested retail price

The retail price is available from local distributors.

For more information

Contact customer service at 952-943-1300 or [email protected] 

Sponsored Recommendations

Snap-on Training: ADAS Level 2 - Component Testing

The second video for Snap-on's comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Intro to ADAS

Snap-on's training video provides a comprehensive overview of Advanced Driver Assistance Systems (ADAS), covering the fundamental concepts and functionalities essential for automotive...

Snap-on Training: Guided Component Tests Level 2

The second video for Snap-on's comprehensive overview of Guided Component Tests, covering the fundamental concepts essential for diagnostic procedures.

Snap-on Training: Data Bus Testing and Diagnosis Part 1

Learn the basics of vehicle data buses and their diagnosis with Snap-on's Jason Gabrenas.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!